Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Euless
Gate parts and welding in Euless usually means one of two jobs: a sagging ornamental iron driveway gate on a 1980s tract home with hinges that have finally given out, or a commercial slide gate near Highway 183 that cycles thousands of times a month and has worn its rollers down to nothing. Either way, the fix starts with a phone call to (817) 241-4067. We come to you, weld on site, and the gate stays in your driveway where it belongs. Hal Gatewood has been doing this since 2001, and his name is on the shop and every invoice.
We know Euless. We know the clay soil that shoves posts out of plumb every spring. We know the airport-adjacent hotel and rental car gates along the 183 corridor that get more cycles in a week than a residential gate sees in a year. And we know how to fix both without turning a two-hour weld job into a two-week replacement project.
Key Takeaways:
- On-site welding for Euless gates - no hauling your gate off to some shop across town
- Gate rollers, rail repair, and hinge replacement are our most common Euless calls
- We service Linear, Viking, and Ghost Controls operators along with the mechanical parts
- Free estimates, and the price we quote is the price you pay - before any work starts
- 90-Day Done Right Promise in writing on every job
Why Gatewood Fence & Gate Is Euless’s Preferred Gate Parts & Welding Company
Hal started this shop in 2001 and has been fixing gates in Euless long enough to know which neighborhoods sit on the worst clay. He’s pulled hinge posts in the Vine Street area that had leaned three inches in a single rainy spring. He’s rebuilt slide gates at hotels off West Airport Freeway without ever closing a guest lane. That kind of local knowledge doesn’t come from a call center three states away. It comes from being here, seeing the job, and fixing it right.
When you call (817) 241-4067, a live person answers. Not a voicemail. Not a chatbot. Twenty-four hours a day, seven days a week. That matters when a gate won’t latch at 2 a.m. and your dog has already learned he can nudge it open. We’re background-checked, uniformed, and we show up in the window we promised. Euless customers tell us the same thing: the person who quoted the job is the person standing in their driveway, and the invoice matches the estimate to the dollar.
Hal’s rule is simple. Fix the gate, don’t replace it unless it’s truly dead. A sagging gate usually means a worn hinge or a leaning post, not a whole new frame. We’d rather weld a hinge back to square than sell you a gate you don’t need. That’s why we back every job with the 90-Day Done Right Promise - if it’s not done right, one call brings us back. No runaround, no fine print.
Our Gate Parts & Welding Services in Euless
Hinge Replacement
Hinges are the quiet workhorse of every gate, and in Euless they take a beating from two directions: Blackland Prairie clay heaves the post, and steel expands and contracts through wild temperature swings that fatigue welds over time. A hinge that looked fine in January can be cracked by August. We carry a full range of heavy-duty weld-on and bolt-on hinges, and we’ll match the pivot geometry to your gate’s weight and swing pattern rather than slapping on whatever’s in the truck. If the hinge post itself has moved, we fix that first - replacing a hinge on a leaning post just means you’ll replace it again next year.
Post Replacement
Euless sits on expansive clay that swells with spring rain and shrinks through summer drought like a slow-motion earthquake. Gate posts absorb all of that movement. We reset sagging hinge posts in concrete with proper depth and anchoring for North Texas soil conditions - which means digging past the active clay zone and using enough mass that the post stays put. For posts that have rusted out at the base, we cut the old steel, weld in new uprights, and match the finish. No gate left looking like it belongs on a barn unless it’s supposed to.
Rail Repair
On commercial slide gates along the 183 corridor, the guide rail takes a relentless pounding from thousands of cycles moving heavy steel panels. We straighten bent rails, weld cracked sections, and re-square the whole track so the gate doesn’t bind mid-travel. On residential swing gates, rail repair often means re-welding the horizontal frame rails where stress cracks have formed at the corner joints. The gate gets stronger, not just patched. When the rack and pinion on an automated slide gate has worn together, we replace both sides of that equation simultaneously - replacing only one just guarantees an early second failure.
Custom Welding
Some gates don’t have an off-the-shelf fix. Maybe the driveway opening is uneven, or the gate frame is a custom size from the 1980s, or a truck backed into the gate and bent a section beyond repair. Our Gate Parts & Welding crew welds new sections, fabricates missing pickets, rebuilds corners, and re-hangs gates to swing true. The work happens in your driveway, meaning you can watch what’s being done and ask questions. Hal will hand you his cell number and mean it.
We also handle gate rollers - the bearing wheels that commercial slide gates ride on - plus latch and lock replacement for everything from simple gravity latches to keypad-controlled magnetic locks. If the gate moves, we fix it. If it’s supposed to hold still, we fix that too.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Euless
We’re certified to work on nine major gate operator brands, and we keep common replacement parts on the truck so a repair doesn’t turn into a multi-day wait for a shipment. For Euless customers, that means a Linear arm opener at a home off Harwood Road gets fixed the same day. A Viking slide operator at a rental car lot just north of 183 can be back in service within hours. Ghost Controls residential openers, which are popular on the newer builds near Bear Creek, are a regular part of our service calls. We stock limit switches, loop detector components, gear boxes, and control boards for these systems so we’re not guessing at what broke.
Common Gate Parts & Welding Problems We See in Euless Homes
- Leaning hinge posts from clay soil movement. Euless’s Blackland Prairie clay expands and contracts with every rain and drought cycle, gradually shoving gate posts off plumb. The fix starts at the post, not the hinge. Set the post right and the gate swings right.
- Worn rack and pinion teeth on commercial slide gates. Airport-adjacent hotels and rental car facilities along 183 run their gates through thousands of cycles monthly. Those teeth grind down fast, and the gate starts chattering or stalling. We replace rack sections and pinions together, so the new parts don’t eat each other.
- Failed loop detectors at high-traffic commercial gates. Hotel shuttle vans and rental car buses hammer loop detectors hard, and when they stop sensing properly, the gate closes on vehicles or refuses to open. We test, replace, and retune detectors so the gate reads every vehicle, every time.
- Warped wooden gate frames on 1970s-1990s homes. The residential core of Euless has a lot of wood-framed privacy gates from the 1980s and 1990s that have warped in the Texas heat. Wood expands, contracts, and twists; we replace frames, add proper cross-bracing, and install heavy-duty hinges that won’t sag.
Pricing for Gate Parts & Welding in Euless, TX
A typical hinged ornamental iron gate repair in Euless - hinge replacement and re-hang - runs $180 to $350. Replacing a leaning gate post with proper concrete anchoring costs $275 to $600 depending on the dig and the size of the post. Rail repairs and custom welding jobs range from $150 for a small crack repair to $900+ for a full frame rebuild. Commercial slide gate rollers and rack sections typically run $400 to $1,200 installed, with the higher end covering airport-adjacent gates that need multiple parts replaced in one visit. The quote you get before we start is the price you pay when the job’s done - we don’t play games with change orders. And right now, any repair over $200 gets $40 off. No trip charge anywhere in the county, and Hal is happy to give you a free second opinion on any written estimate you’ve already got.
We Also Serve Cities Near Euless
While this page is for Gate Parts & Welding in Euless, our trucks regularly run to Bedford, Colleyville, Grapevine, and Hurst. If your gate is in one of those cities, the same crew, the same 90-Day Done Right Promise, and the same live-answer phone line apply. Call (817) 241-4067 and we’ll get you on the schedule.
Serving Euless, TX - Our Local Coverage Area
We’re based in the Euless area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Euless
The gate post itself is moving. Euless clay swells when it rains and shrinks in dry heat, slowly leaning posts out of plumb. New hinges on a leaning post is a fix that lasts weeks, not years. The fix is to reset the post in concrete, re-square the gate, and only then replace the hinges. That’s the order we work in, and it’s why our repairs hold up. Call (817) 241-4067 and we’ll put eyes on your post before you spend another dollar on hinges.
Yes. We work one lane at a time on slide gates along the 183 corridor so shuttle vans and guest vehicles keep moving while we replace rollers, rack sections, or loop detectors. We schedule around your peak check-in and check-out windows. Hal and his crew have done this at hotels and rental car facilities all along Airport Freeway, and the lot never closes. Call (817) 241-4067 to set up a time that works for your traffic pattern.
Rack and pinion teeth and the gate rollers themselves. Those gates cycle thousands of times a month, far more than a residential gate. The metal teeth grind down to a knife edge, the rollers flatten or seize, and the gate starts chattering and stalling. The real problem is when only one part gets replaced. If the rack is worn and you replace just the pinion, the new pinion eats itself on the old rack. We replace both together. Call (817) 241-4067 for a free assessment before the gate strands a guest at the exit.
A slide gate is usually the answer. Slide gates run parallel to the fence line instead of swinging into the driveway, so they work on shorter driveways and narrow side yards - common on the older Euless lots where homes were built close together. We fabricate and weld the guide rail, set the rollers, and install the operator if you want automation. The gate rides on steel rollers and a solid track, which we anchor properly for the clay soil. Call (817) 241-4067 and Hal will come measure, give you a written quote, and talk through what fits your lot.
Yes, and it’s not optional. Any automatic gate in Texas is required to have entrapment protection - photoelectric sensors, safety edges, or both - so it can’t close on a person, a child, or a pet. When we repair hinges or rollers on an automated gate, we inspect the safety devices and bring them up to code if they’re missing, bypassed, or worn. It’s a safety item, not an upsell. Call (817) 241-4067 and we’ll check yours during the repair.
Contact Gatewood Fence & Gate in Euless
If your gate is sagging, dragging, sticking, or just plain done, call (817) 241-4067. A live person answers. We’ll schedule a time to come see the gate in person, quote a price before any work starts, and fix it in place. Hal Gatewood’s name is on the shop and on every invoice - that’s the oldest guarantee there is, and we stand behind it with the 90-Day Done Right Promise. Serving Euless, Bedford, Colleyville, Grapevine, and Hurst since 2001. Call today and get a free estimate on gate parts and welding in Euless.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Euless since 2001.