Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Motor & Opener for North Richland Hills Homeowners
When your gate won’t open in North Richland Hills, you don’t have time for a company that treats you like a ticket number. Gate motor and opener work in North Richland Hills has to handle two things: our Texas heat and our summer lightning, both of which kill motors faster than the manufacturer’s warranty expects. We’re Gatewood Fence & Gate, and we’ve been fixing gate motors and openers across North Richland Hills since 2001, the year Hal Gatewood put his own name on the shop and started answering the phone himself. Most motor and opener repairs in North Richland Hills are done the same day we hear from you, and if you call (817) 241-4067, a live person picks up, no voicemail, no phone tree, no call center three states away. That part matters because a gate motor that won’t open your driveway isn’t just an inconvenience, it’s a security gap in your fence line, and we treat it that way from the first call.
Here’s the short version: Gate motor and opener repair in North Richland Hills typically runs $180 to $380 for common failures, and most jobs are fixed in one visit. For a full breakdown of what drives these prices, see our Gate Motor & Opener cost guide. Installations of new motors or complete opener packages run higher, and we’ll give you a firm written price before any work starts. Hal’s name is on the shop, the shop is down the road, and every job carries the 90-Day Done Right Promise in writing. That’s the oldest accountability there is.
What Our Gate Motor & Opener Service Includes
Gate motors and openers in North Richland Hills fail in predictable ways, and we fix all of them. Some jobs are a bad capacitor or a misaligned safety sensor. Some are a control board that needs replacing. Some are a motor that’s been asked to push a sagging gate for too many years and finally gave out. Whatever your gate is doing or not doing, this is what we cover.
Motor Installation
When a motor is truly beyond saving, or when you’re adding an opener to a gate that’s always been manual, we install the right motor for your gate’s weight, length, and location in North Richland Hills. We don’t sell you the biggest motor on the truck; we measure the gate and match the motor to the load, because an oversized motor on a light gate wears itself out faster. Hal or one of his crew handles the full installation in your driveway, including the mounting, the arm or chain, the power connection, and the safety adjustments, then we test the gate through full open and close cycles with you watching.
Motor Repair
Most gate motor problems in North Richland Hills are repairable, and that’s our first instinct. A motor that won’t start, starts then stops, or makes a grinding noise usually has a specific cause: a failed capacitor, a worn gear, a bad limit switch, or a control board issue. We diagnose the actual failure, show you what we found, and fix that part rather than swapping the whole operator because it’s easier for us. If a motor can be repaired for $150 instead of replaced for $900, that’s the route we take, and we’ll tell you plainly when replacement is the better long-term call.
Linear Motor
Linear gate motors, often called linear actuators or ram-style operators, are common on swing gates in North Richland Hills. They use a sliding piston to push or pull the gate leaf, and the two things that kill them are moisture intrusion and a gate that’s fighting its own hinges. We service linear motors from the major brands, and we check the gate’s movement carefully before condemning the motor, because a linear actuator failing early is often a hinge-post or alignment problem wearing it out.
Slide Motor
Slide gates need motors that turn a gear against a rack, and when that rack gets a missing tooth or the wheels get worn, the motor works harder than it should. We service slide motors across North Richland Hills and pay close attention to the track, wheels, and rack alignment, not just the motor itself. A slide motor that’s making noise or struggling is often a $40 wheel replacement away from running smooth again, and we’ll check that before we quote you a motor.
Intercom Integration
Plenty of North Richland Hills homes have an intercom or telephone entry system tied to the gate opener, and when that integration stops working, the gate won’t respond to the keypad or the house phone. We wire and configure intercom integration between your gate operator and your existing entry system, from simple hardwired keypads to systems that call your cell phone when someone’s at the gate. The goal is one system, not two things that kind of work together.
Battery Backup
North Richland Hills gets storms that knock out power, and a gate opener with a dead or missing battery backup is a gate that doesn’t open when the power’s out. We test, replace, and install battery backup systems on gate operators so your gate still works when the lights don’t. If your operator has a battery backup that’s never been tested, that’s a quick check we’ll do while we’re on-site for any other repair.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Motor & Opener
We service door opener brands you’ll actually find on gates in North Richland Hills, not just one or two the distributor pushes. Ghost Controls units are on a lot of residential swing gates around here, and we’ve replaced enough Ghost Controls control boards and remotes to know their quirks: they’re solid machines, but the safety sensor wiring is often the weak point. We stock OEM parts for Ghost Controls and can usually repair one of their operators the same visit.
DoorKing and Elite operators show up on heavier slide gates and light commercial work in North Richland Hills. DoorKing’s 9150 slide operator is a workhorse, and we’ve rebuilt the gearboxes on enough of them to know exactly when a rebuild beats a replacement. Mighty Mule openers are the most common DIY-installed unit we see, and we’ve found that a lot of Mighty Mule failures come down to installation shortcuts, not the motor itself. We re-set them properly and they run for years. Whatever brand is on your gate, if it’s not listed here we still likely service it, and if you call, Hal will tell you straight whether we can help before you spend a dime.
Signs You Need Gate Motor & Opener Right Now
Some gate motor problems announce themselves loudly. Others start as something you barely notice and then leave you locked out of your own driveway on a Tuesday morning. Here’s what to watch for in North Richland Hills, where heat and storms push these warnings to the surface faster than you’d expect.
- The gate opens halfway and stops. That’s often a limit switch issue, a failing obstruction sensor, or a motor that’s overheating and shutting down on thermal overload. In North Richland Hills summers, an overheating motor isn’t going to fix itself when the weather cools off; it’s going to fail for good.
- The motor runs but the gate doesn’t move. That’s a broken gear, a slipping clutch, or on slide gates a rack that’s lost a tooth or two. When the motor spins and nothing happens, continuing to press the remote is damaging the parts that do still work.
- The gate reverses right after closing. That’s your safety system doing its job, which means a sensor is misaligned or the force setting is wrong. It also means anyone driving up after you is going to see your gate sitting open, and an open gate in North Richland Hills defeats the whole point of having one.
- The opener makes a grinding or whining noise. Grinding is metal on metal somewhere it shouldn’t be, and whining usually means a capacitor or gear is on its way out. Motor noise is one of those things that gets worse every single cycle, and waiting to see if it goes away just adds to the repair bill.
- The remote works sometimes, then stops, then works again. Intermittent operation is almost never the remote battery in North Richland Hills; it’s usually a receiver board, a loose power connection, or wiring that’s been chewed by something living in the operator box. When the gate works sometimes, that’s the best time to fix it, because ‘sometimes’ always turns into ‘never’ at the worst moment.
Our Gate Motor & Opener Process - Step by Step
When you call Gatewood Fence & Gate about a gate motor or opener in North Richland Hills, here’s exactly what happens, from the first call to the 90th day after the job.
- 1
You call, a person answers. Not a voicemail, not a queue. You’ll get Hal or someone from his crew on the line, and they’ll ask what the gate is doing, what brand the operator is, and whether the gate is stuck open, stuck closed, or somewhere in between. We’ll give you a straight answer on whether we can come today or tomorrow.
- 2
We arrive and diagnose in your driveway. The person who shows up will be background-checked, in uniform, and driving a Gatewood Fence & Gate truck. We test voltage at the operator, check the capacitor and the control board, run the gate through its cycle, and find the actual failure before we touch anything with a wrench.
- 3
You get a written price before we start. No estimate that changes at the door. We tell you what’s wrong, what it costs to fix, and what your options are, including whether repair or replacement makes more sense. The price we write is the price you pay, and it’s agreed before any work begins.
- 4
We do the work on-site. Most repairs happen right there in your driveway. We carry common parts for the brands we service, and if a part isn’t on the truck, we run and get it the same day. When welding is part of the job, we weld on-site too, so your gate doesn’t leave your property on a flatbed.
- 5
We test everything with you and hand you the 90-Day Done Right Promise. The gate gets run through full open and close cycles, the safety sensors get tested, the force settings get checked, and you get to watch it all work before we call the job done. Every job gets the Promise in writing, and if it’s not done right, one call brings Hal back, no runaround.
How Much Does Gate Motor & Opener Cost in North Richland Hills?
A typical Hurst Gate Motor & Opener repair runs similarly to North Richland Hills, about $180 to $380, depending on what actually failed. A capacitor replacement might be under $200, while a control board replacement can push toward $400 or more depending on the brand and model. Complete motor replacement, including the new operator and installation, generally runs between $850 and $2,200 in North Richland Hills, with the price driven mostly by the motor’s horsepower, the gate’s weight, and whether it’s a swing or slide setup. A battery backup installation typically adds $250 to $500.
What changes the price? The gate’s condition matters more than most people expect. A motor on a gate that’s properly aligned and balanced runs cool and lasts for years. A motor on a gate that’s been sagging into the ground is fighting physics every time it cycles, and that fight shows up in the repair cost. That’s why we check the gate itself, not just the motor, before we quote a fix. The best way not to overpay is to get a diagnosis from someone who will tell you what’s actually wrong and what just needs adjustment. Our estimates are free, and we’ll tell you upfront whether your fix is a $40 adjustment or a real replacement. We offer $40 off any repair over $200, there’s no trip charge inside the county, and we’ll honestly tell you if the numbers point to replacing the motor rather than repairing it. Call (817) 241-4067 for an exact quote, estimates are free and there’s no pressure.
One more thing on cost: we never start work without you agreeing to the written price first. The number we write down before we pick up a tool is the number on the invoice when we’re done. No surprise line items, no discover-the-fee game. That’s been how Hal has run the shop since 2001, and it’s not changing.
Gate Motor & Opener Near North Richland Hills - Our Service Area
We’re based right here in North Richland Hills, and we service the surrounding cities in Tarrant and Dallas counties: Gate Motor & Opener in Fort Worth, Gate Motor & Opener in Southlake, plus Colleyville, Hurst, Bedford, Keller, Euless, Grapevine, Arlington, Irving, and Flower Mound. Inside the county we don’t charge a trip fee, and we can usually get a truck to your driveway the same day or next morning. Hal works these neighborhoods himself, so the person you talk to on the phone is often the person who shows up at your gate.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Motor & Opener in North Richland Hills
A gate motor and opener is the powered unit that automates your driveway or entry gate so it opens and closes by remote, keypad, or other access system. On a swing gate, the motor is often a linear actuator arm; on a slide gate, it’s a gear-driven motor that moves the gate along a track. We install, repair, and service all types of gate motors and openers in North Richland Hills, including the electrical, safety sensors, and control systems that go with them.
Most gate motor repairs in North Richland Hills are completed the same visit, typically within one to two hours once we’re on-site and diagnosed. If a specific part isn’t on the truck, we can usually source it the same day and return to finish the job. Full motor replacements take longer, usually a half day or full day depending on the gate and the scope of the install.
Most gate motor repairs in North Richland Hills cost between $180 and $380, with the price depending on the specific part that failed and the brand of your operator. Motor replacement with installation runs from $850 to $2,200 for most residential gates in this area. Every quote is written and agreed before work starts, so the price you approve is the price you pay, and we offer $40 off any repair over $200. Call (817) 241-4067 for an exact quote on your gate.
Yes, we service Ghost Controls, DoorKing, Elite, and Mighty Mule gate openers regularly, along with LiftMaster, FAAC, BFT, Linear, and Viking. We stock OEM parts for the brands we see most often in North Richland Hills and have been repairing these specific units for over two decades. If your brand isn’t on that list, call (817) 241-4067 and ask; we’ll tell you straight whether we can fix it.
In most cases, yes. A gate stuck shut or stuck open in North Richland Hills is a same-day job for us, and we prioritize calls where the gate won’t open or won’t close. Reach us at (817) 241-4067 day or night; calls are answered by a live person 24/7, and we’ll get someone out to you as fast as the county roads allow.
Every gate motor and opener job we do in North Richland Hills carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right, one call brings Hal back, no runaround. Manufacturer warranties on parts and new motors still apply on top of our 90-day promise, so you’re covered on both the labor and the components.
Clear a path to the gate’s motor and control box, which is usually mounted near the gate post or on a nearby wall. Have any remotes or keypads available so we can test the full system, and if the gate is stuck closed, make sure we can access the operator from both sides. Beyond that, you don’t need to do anything; just be there to show us what the gate’s been doing, and we’ll take it from there. Call (817) 241-4067 to schedule, and estimates are free.
Schedule Your Gate Motor & Opener Service in North Richland Hills Today
When your gate stays shut when it should open, call (817) 241-4067. Get a live person, a straight answer, and a free, no-obligation estimate from a company that’s been doing gate motor and opener work in North Richland Hills since 2001. Twenty-four hours a day, seven days a week, Hal or his crew will answer, and the price we quote is the price you’ll pay. Your gate should open when you tell it to; we’ll make sure it does.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Richland Hills since 2001.