Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in North Richland Hills?
Gate parts and welding services in North Richland Hills typically cost between $150 and $450 for standard labor and material, depending on the severity of the damage and whether on-site fabrication is required. Most simple hinge or latch repairs fall on the lower end of this range, while structural welding on gate frames or post-reinforcement projects often range from $300 to $650. We provide upfront pricing before a single tool comes out of the truck, so you know exactly what the job costs before we start.
If you are looking for an honest assessment without the sales pressure, call us at (817) 241-4067. We offer free estimates and stand behind every repair with our 90-Day Done Right Promise. My name is Hal Gatewood, and I have been fixing gates in this community since 2001. When you call, you get a live person, not a recording.
Gate Parts & Welding Cost Breakdown (2026)
Pricing for gate work in North Richland Hills isn’t one-size-fits-all, but we believe in transparency. Below is a breakdown of common repair categories we handle at Gatewood Fence & Gate. These numbers reflect current market rates for high-quality, durable materials and professional labor.
| Service Item | Estimated Cost Range |
|---|---|
| Minor Hinge/Latch Replacement (Parts & Labor) | $150 - $250 |
| On-Site Structural Welding (Cracked Frames/Bracing) | $250 - $450 |
| Gate Post Re-Anchoring or Reinforcement | $350 - $600 |
| Gate Opener Arm/Sensor Calibration & Part Swap | $200 - $500 |
| Complete Driveway Gate Hinge Restoration | $300 - $550 |
The biggest factor driving these costs is the condition of the metal. If we are dealing with heavy rust caused by our local Texas humidity, we often have to grind down to clean steel before we can weld, which takes longer than a standard repair. We always prioritize fixing the existing structure rather than pushing for a full replacement, saving you money while keeping your gate secure. Our home page details our full range of services, but if you have a gate that is sagging or dragging, don’t wait until the hinge snaps entirely. Call (817) 241-4067 to get a firm quote.
What Affects Gate Parts & Welding Pricing in North Richland Hills
When I look at a gate, I am looking at more than just the broken weld. I am looking at the soil, the weight of the gate, and how it has settled over the years. Here is what actually dictates the price of your repair:
- Metal Thickness and Condition: If your gate frame has rusted through, we cannot weld to thin, flaky metal. We have to cut out the bad section and weld in new steel, which increases labor time compared to a simple surface weld.
- Gate Weight and Sagging: A gate that drags on the concrete is putting immense stress on the hinges. Fixing the sag usually requires re-welding the hinge plate or adding a truss cable, which is a structural fix rather than a cosmetic one.
- Accessibility and Terrain: Our trucks are fully equipped for on-site welding, but if your gate is located on a steep incline or has limited clearance, it changes how we set up our equipment.
- Brand Specifics: We service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate uses proprietary parts that are no longer manufactured, we may need to fabricate a custom mounting bracket.
- Scope of Damage: Fix the panel without the post, and you will likely fix it twice. We look at the gate as a system; if the post is leaning, welding the gate hinge will only provide a temporary fix.
If you need Gate Parts & Welding in North Richland Hills, we bring the shop to your driveway. We don’t believe in hauling your gate away unless absolutely necessary. We get it done on-site, and we get it done right the first time.
How to Save on Gate Parts & Welding
You shouldn’t have to break the bank to secure your property. Here are a few ways we help our neighbors in North Richland Hills keep costs down:
- Use Our Standing Offers: We offer $40 off any repair over $200. We also provide a permanent 10% discount for seniors and veterans because we appreciate what you have done for this country and this community.
- Take Advantage of No Trip Charges: We do not charge a trip fee for jobs within the county. You pay for the work, not the drive.
- Get a Second Opinion: If you have a written estimate from another company that seems high, show it to us. We offer free second opinions on any written estimate to ensure you aren’t being upsold on parts you don’t need.
- Catch Issues Early: A gate that makes a grinding noise or sticks when it opens is usually a cheap adjustment. If you let it go until the hinge breaks, you are looking at a much more expensive welding job.
If you have questions about your specific setup, call (817) 241-4067. I answer the phone myself, and we can usually talk through your problem to see if it is something simple you can monitor or if it needs a pro.
A Note on Safety
Gate systems are under immense tension, especially when springs or heavy-duty hinges are involved. High-tension garage door springs and gate opener arms can cause serious injury if handled improperly. If you notice a cable fraying, a spring looking uneven, or a gate that has come off its track, please do not attempt to force it open or closed. These systems are dangerous. Call a trained professional who has the right tools to secure the gate before working on it.
FAQs - Gate Parts & Welding Cost
How much does it cost to weld a broken gate hinge in North Richland Hills?
A standard gate hinge weld repair typically costs between $150 and $300, depending on whether we need to reinforce the surrounding metal. We provide a firm quote before we start, so you won’t have any surprises on the final invoice. Call (817) 241-4067 for an estimate.
Is it cheaper to repair a gate or replace it?
In 90% of cases, repair is significantly cheaper than replacement. A new gate installation can cost thousands, while most structural repairs, even those involving significant welding, cost a fraction of that. We always look to repair first because we know the value of a dollar.
Can you fix my gate today?
We do our best to accommodate urgent requests. Because we are locally owned and owner-operated, we don’t have a corporate dispatch queue to navigate. If you call (817) 241-4067, we can check our schedule immediately and let you know when we can get a technician to your property.
Do you charge for estimates?
No. We offer free estimates for all our services. If you have a written estimate from another company, we are happy to provide a free second opinion to make sure you are getting a fair deal. Call us today to schedule a time for us to look at your gate.
What if the gate breaks again after you fix it?
Every job we perform is backed by our 90-Day Done Right Promise. If the repair doesn’t hold up, we come back and make it right. We put this guarantee in writing on every invoice, not just in fine print. We have been in business since 2001, so you know we are going to be here if you need us.
Pricing reflects the North Richland Hills market as of 2026. Gatewood Fence & Gate offers free estimates - call (817) 241-4067.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Richland Hills since 2001.
What Our Customers Say
"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo