Ghost Controls Gate Repair Service Nationwide | Gatewood Fence & Gate

Why North Richland Hills Homeowners Choose Ghost Controls Gate Repair

We provide independent Ghost Controls service in North Richland Hills, TX - from the older subdivisions off Smithfield Road to the newer HOA communities further east. We’re not affiliated with or authorized by Ghost Controls, and we’ll say that plainly. What we bring instead is years of field experience with the AXDP, GTO/PRO, and DTP series, including the specific ways these openers fail after North Texas storms and summers. When your Ghost Controls gate stops closing, slips mid-travel, or starts ghost-opening at 2 a.m., we’re the crew that finds the actual cause instead of swapping parts until something sticks. Call (817) 241-4067 and a live person answers.

Call (817) 241-4067

Key Takeaways:

• Independent Ghost Controls service - not factory authorized, but deeply familiar with AXDP, GTO/PRO, DTP, and older TSS1/RSP arms.
• We diagnose the real failure mode: relay burnouts, torque-limiter slip, limit switch drift, battery tray corrosion.
• OEM boards and arms whenever available - aftermarket boards often have wrong torque profiles and cause false overload faults.
• 90-Day Done Right Promise in writing on every Ghost Controls repair.
• Live person answers 24/7 at (817) 241-4067.

Why Trust Gatewood Fence & Gate for Your Ghost Controls Gate Repair?

Hal Gatewood has been repairing gates in North Richland Hills since 2001, and he still lives off the Smithfield Road corridor where he grew up. He went through the welding and fabrication program at Tarrant County College’s northeast campus before spending years on general ironwork, and these days most of what we fix is gate openers and frames other installers left in bad shape. When it comes to Ghost Controls specifically, we’ve worked on enough AXDP solar units and GTO/PRO residential arms to know what breaks on them and why. A board that fries after a spring storm is usually a surge issue, not a mystery. An arm that stops half-travel is usually clutch slip, not a bad motor.

We carry genuine Ghost Controls boards, arms, and sensors locally, and we know when an aftermarket part will cause more trouble than it saves. Every job carries our 90-Day Done Right Promise in writing - if it’s not done right, we make it right, no runaround. You’ll also get $40 off any Ghost Controls repair over $200, and seniors and veterans get a permanent 10% discount. Hal’s name is on the shop and on every invoice. That means something to him, and it should mean something to you.

Common Ghost Controls Gate Repair Problems We Fix in North Richland Hills

• Control board relay failure - AXDP and GTO/PRO series. After North Texas thunderstorms and lightning in the spring, we regularly see AXDP and GTO/PRO boards where the open relay has welded closed or blown entirely. The gate either won’t open at all, or it opens on its own and won’t stop. The fix is a board replacement - not a relay resolder, that’s a temporary bandage.
• Torque limiter clutch slip - TSS1 and older RSP arms. These older torque-limit retrofit arms are still on dozens of 1990s gates in NRH. The clutch wears, and the gate starts stopping halfway through its travel or reversing erratically. We rebuild the clutch and re-torque the arm rather than replacing the whole unit when the arm itself is still sound.
• Limit switch drift - DTP slide openers. On DTP slide gates, the limit switch drifts over time, and the gate overtravels and bends the stop bracket. We reset the limits, straighten the bracket, and if the bracket has been bending repeatedly, we’ll weld a reinforcement gusset so it stops happening.
• Battery tray corrosion - AXDP solar units. North Richland Hills gets heavy rain in spring and fall, and AXDP solar battery trays are not sealed as well as they should be. Moisture wicks in, the negative terminal corrodes, and you get intermittent low-battery faults even on sunny days. We clean the tray, replace the terminal, reseal the housing, and the false faults disappear.
• Ghost-opening at night - multiple series. A gate that opens by itself in the middle of the night is usually a failing relay or a moisture-shorted sensor. We trace the signal line and test the sensor under load rather than guessing. The fix is usually faster than the worry.

Ghost Controls Parts & Our Repair-vs-Replace Approach

For Ghost Controls, we use OEM boards, arms, and sensors whenever they’re available. Aftermarket Ghost Controls-style boards frequently lack matching torque profiles and motor amperage limits, which leads to false overload faults - the gate works when the tech leaves and throws a code three days later. That’s not a fix, that’s a callback waiting to happen. We stock common OEM boards and sensors locally for fast turnaround, and for harder-to-find parts we order direct and tell you how long it’ll take before anything ships.

Here’s our honest rule: any Ghost Controls control board older than 8 years, or any board with visible scorching, gets replaced rather than repaired. Boards that old are on borrowed time. But the arms and gearboxes are a different story - we rebuild those when the housing and gears are still tight, and that’s often half the cost of a new arm. We’ll show you the worn part and explain the choice before any work starts. Call (817) 241-4067 if you want a straight answer on what’s worth saving.

Our Ghost Controls Service Process - Step by Step

1. 1
   Diagnosis on site. We test the board, arm, sensor, and power supply under load - not just on a bench. Ghost Controls failures often only show up when the opener is actually moving a gate, especially heavy ornamental iron gates common in North Richland Hills.
2. 2
   Written quote before work. You see the number before we touch a wrench. No trip charge inside the county, and the price we quote is the price you pay.
3. 3
   Repair or rebuild. We replace OEM boards and sensors, rebuild arms and gearboxes when they’re worth saving, and weld on site if the gate frame or post bracket needs reinforcement. The gate stays in your driveway.
4. 4
   Cycle testing under load. We run the gate through full open-close cycles with the motor under real torque, then test the safety edges, auto-reverse, and battery backup if present.
5. 5
   90-Day Done Right Promise in writing. One call brings us back. No fine print, no runaround.

Ghost Controls Products We Service & Install in North Richland Hills

We service and install the full Ghost Controls lineup we see in NRH: the AXDP series solar-ready dual gate openers, the GTO/PRO DC residential swing and slide openers, and the DTP heavy-duty AC/DC slide gate openers. We also work on older TSS1 and RSP torque-limit retrofit arms that Ghost Controls no longer manufactures - we stock refurbishable cores and can often rebuild one. We keep common boards, sensors, remote receivers, and battery terminals in local stock, which means most Ghost Controls repair in Southlake and North Richland Hills don’t wait on a shipping truck. If you’re not sure what series you have, read the label on the control box and call us - we’ll walk you through it.

We Also Service These Brands

Ghost Controls is one brand in our shop, not the whole shop - we also offer Gate Repair for other leading brands. We service LiftMaster, Mighty Mule, and DoorKing alongside Ghost Controls, which means if your gate has a Ghost Controls opener and a LiftMaster receiver or a Mighty Mule sensor, we’re not scratching our heads. One call covers it all.

FAQs - Ghost Controls Gate Repair Service in North Richland Hills

Book Your Ghost Controls Service in North Richland Hills, TX

A Ghost Controls gate that won’t close or opens on its own isn’t something to put off, whether you need Ghost Controls service in Fort Worth or here in NRH. Call (817) 241-4067 and a live person answers - not a voicemail, not a call center three states away. We’ll get you on the schedule, and Hal or one of his crew will be at your gate in North Richland Hills with the right parts and a written quote before any work starts. If we hand you our number, use it - that’s what it’s there for.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Richland Hills since 2001.