Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLiftMaster Gate Repair in Fort Worth, TX | Gatewood Fence & Gate
We service LiftMaster gate operators across Fort Worth every week through our Fort Worth Gate Repair service. We’re an independent LiftMaster repair company - not manufacturer-affiliated - and the reason our work here holds up is simple: we fix what the Blackland Prairie clay and ice storms do to your operator, not just the symptom in front of us. If your LiftMaster slide gate is grinding, tripping its safety loop, or dead after the last freeze, call (817) 241-4067 and a live person picks up.
Fort Worth’s soil moves, and your LiftMaster operator feels every inch of it. We’ve been running LiftMaster sales & service calls long enough to know exactly where these failures start. From Ridglea to Aledo, from the Chisholm Trail corridor to the ranch roads west of Loop 820, we stock the parts and carry the welding gear to fix the gate in your driveway.
Why Fort Worth Residents Choose Us for LiftMaster Service
Hal Gatewood has been fixing gates since 2001, and he learned the mechanical side at Tarrant County College’s northeast campus - welding, fabrication, and the habit of doing it right the first time because your name is on the work. We’re owner-operated, our address is published, and the person who answers the phone at 2 a.m. knows what an LA400 limit switch is.
We work on LiftMaster gear daily, from the LA400 slide operators on ranch entrances to the CSW200 swing units in HOA subdivisions. We install OEM boards and motors where calibration has to hold, and we tell you straight when a hinge or post is the real problem. Every repair carries our 90-Day Done Right Promise in writing - if it’s not right, one call brings us back. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
Common LiftMaster Gate Repair Problems We Solve in Fort Worth
- Post-heave misalignment tripping the safety-reverse loop: The Blackland Prairie clay under central and west Fort Worth swells through winter and shrinks in summer. A post set plumb in August can drift an inch or more by February, binding your LiftMaster slide track until the loop trips on every cycle. We reset the post, shim the track, and recalibrate limits - not just clear the fault code.
- Ice-glazed drive chains and cracked limit housings: Freezing rain like February 2021 and January 2023 coats the LA400’s chain and limit-switch cover in heavy glaze ice. The plastic end-covers crack, the motor stalls, and the operator goes dark. We replace the damaged components and test the full cycle before we leave.
- Heat and clay dust killing CSW200 pulleys and sensors: Fort Worth’s 105°F summers bake the belt-drive pulleys, and fine clay dust fills the optical eye until the gate refuses to close. We clean, replace, and adjust so the operator reads its own safety edges cleanly.
- Lost limit calibration on ranch swing operators: A sagging pipe gate on a horse property west of Loop 820 hits a LiftMaster swing operator harder than any spec sheet assumes. Repeated collisions knock the limits out of calibration, and the gate swings too far or stops short. We weld the hinge points, true the gate, and reset the operator’s travel limits.
- Worn hinges and dropped gates on aging ironwork: Many west-side Fort Worth estates have ornamental iron driveway gates whose hinges and latch keepers predate their LiftMaster operator by decades. The operator isn’t the weak link - the hardware is. We repair hinges on site, and that’s usually the fix that makes the operator behave.
LiftMaster Service in Fort Worth: What Local Conditions Mean for Your Equipment
Here’s the thing about Fort Worth that a generic repair page will never tell you: the western and southwestern parts of the city run dual-purpose LiftMaster operators on both ornamental estate gates and working pipe-and-rail livestock gates. If you need Gate Installation in Fort Worth, we understand these dual-purpose setups firsthand. That’s not true in Arlington or Mansfield. A single service call to a horse property off the Chisholm Trail Parkway often means recalibrating a CSL24 on the driveway and then walking the back pasture to repair a dropped hinge on the cattle gate. The soil out there - that shrink-swell Blackland Prairie clay - heaves posts in ways cities built on limestone never see. When a post moves, the slide gate grinds the concrete apron and the safety loop trips. Our techs treat post-heave realignment as a standard seasonal call, and we carry the welding gear to fix the post and the LiftMaster calibration in the same visit.
On a Ridglea Hills estate off Camp Bowie Boulevard, our tech arrived to find a LiftMaster HDSL24 slide gate grinding its concrete track and tripping the safety-reverse loop every third cycle. The August-set post had heaved nearly an inch out of plumb through the winter wet-dry swings; we reset the post, shimmed the track, and recalibrated the limit switches so the operator now cycles clean without tripping.
LiftMaster Models & Products We Service in Fort Worth
We service the LiftMaster LA400 and LA412 slide gate operators, the CSW200 and CSL24 swing and slide units, the HDSL24 heavy-duty slide operator, and the 8500W wall-mount residential opener. For repairs that must hold calibration under Fort Worth clay movement and ice loads, we install LiftMaster OEM boards, limits, and motors. For older out-of-warranty units, we’ll offer aftermarket drive chains and hinges with straight guidance on when a post reset and hinge replacement beats paying for a new board. We stock board-level parts and mechanical replacements locally, so a repair doesn’t mean waiting on a distributor run across the Metroplex.
LiftMaster Service Pricing in Fort Worth
A LiftMaster gate repair in Fort Worth typically runs $180-$480 depending on what failed and which model you have. A post-heave realignment with limit recalibration on a slide operator usually lands in the $250-$450 range. A limit-switch or safety-sensor replacement runs $120-$250. An LA400 ice-storm repair with a cracked limit housing and drive chain work typically falls between $300 and $600. Full gate-and-operator replacement starts around $2,500 and can exceed $7,500 on long ranch drives. Every price is quoted and agreed before any work starts - you’ll never sign off on a number we didn’t hand you first. Our estimate is free, and there’s no trip charge inside the county. Call (817) 241-4067 for an exact quote.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - LiftMaster Gate Repair in Fort Worth
Your post is moving. The Blackland Prairie clay swells with winter moisture and heaves the post out of plumb, binding the slide track until the operator’s safety loop reads resistance and reverses. The fix is resetting the post, shimming the track, and recalibrating the limits - not bypassing the loop or boosting motor torque. Call (817) 241-4067 and we’ll come look at the post itself.
Yes, you can replace the board alone if the motor and gearbox are still sound. On a 10-year-old CSL24 on a Fort Worth estate gate, the board is often the failure point while the mechanicals have years left. We stock OEM boards and we’ll tell you straight whether a board swap saves you or just delays the inevitable. Call (817) 241-4067 with your model number and we’ll quote it.
Usually yes. The LA400’s drive chain and limit-switch housing take the worst of the glaze ice, and the motor stalls from the load rather than burning out internally in most cases. We replace the cracked plastic covers, free or replace the chain, and test the motor’s draw. If the motor itself is cooked, we’ll quote a replacement and you’ll see the number before we touch a wrench. Call (817) 241-4067 for a free estimate.
We service LiftMaster keypads, telephone entry systems, safety photo eyes, loop detectors, and edge sensors. Most HOA-mandated entry systems in Fort Worth subdivisions along Alliance and Chisholm Trail Parkway use LiftMaster operators paired with phone-entry keypads, and we handle the full setup - not just the mechanical side. Call (817) 241-4067 and tell us what your HOA sent you.
Yes, we do. We service LiftMaster operators on pipe-and-rail livestock gates throughout the ranch properties west and southwest of Fort Worth, and we weld on site so a sagging hinge or dropped gate doesn’t mean hauling the gate off the property. Call (817) 241-4067 and tell Hal what the gate’s doing.
Service Areas Near Fort Worth
We run LiftMaster service calls throughout Fort Worth and the surrounding communities, including LiftMaster service in Southlake, LiftMaster service in North Richland Hills, Colleyville, Hurst, and Irving. If you’re within Tarrant County, there’s no trip charge. For a look at the full coverage area, see our Fort Worth service area page.
Book Your LiftMaster Service in Fort Worth Today
Tell us what your LiftMaster gate is doing - grinding, tripping the loop, dead after the freeze - and we’ll get someone out. A live person answers (817) 241-4067 around the clock. Estimates are free, and the price we quote is the price you pay.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001. If I hand you my number, use it - that’s what it’s there for.