Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Fort Worth, TX | Gatewood Fence & Gate
We service Ghost Controls gate openers across Fort Worth, and we do it as an independent Gate Repair in Fort Worth shop, not a factory warranty center. That means honest repair calls: we tell you when a part is still good and when it’s done. The thing that separates Ghost Controls work here from work in Dallas or Austin is the ground, because Fort Worth’s Blackland Prairie clay moves gate posts enough to throw drive-arm geometry out of spec season after season. If your Ghost Controls opener is reversing on its own, grinding the apron, or dead after a freeze, call (817) 241-4067 and you’ll get Hal Gatewood or one of his crew on the line, not a call tree.
Why Fort Worth Residents Choose Us for Ghost Controls Service
Hal Gatewood has been fixing gates in the Fort Worth area since 2001. He learned the trade at Tarrant County College’s northeast campus, went through their welding and fabrication program, and spent years doing general ironwork before settling into gates. Most of his regulars know him from the Smithfield Road corridor where he grew up and still lives. That local presence matters because Ghost Controls openers have failure patterns here that don’t show up in the installation manual, and those patterns repeat block by block, season by season.
We’re one of the few shops offering Fort Worth Gate Installation and repair that services all the major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. But we don’t treat them alike. Ghost Controls has its own quirks, and our crew has spent enough hours inside those control boards and actuator arms to know which problems are electrical, which are mechanical, and which are the post shifting under all of it. We also answer the phone around the clock with a live person, and every job we do carries the 90-Day Done Right Promise in writing.
Common Ghost Controls Gate Repair Problems We Solve in Fort Worth
- Limit switch seizures and cracked limit housings after ice storms. The January 2023 freeze and Winter Storm Uri in 2021 coated TSS1 and TDS2 actuator arms with glaze ice. When the arm tries to move through that ice, the limit switch bracket twists or the plastic housing cracks. We replace the factory limit assembly and re-align the arm so it doesn’t bind on the next freeze.
- Motor burnout from a post-heaved gate dragging the concrete. Fort Worth’s clay expands and contracts through wet-dry cycles. A gate that was plumb in August can lean enough by February to drag the apron on every open cycle. That resistance overworks the motor until it burns out. We fix the post first, then the motor, and the repair actually lasts.
- Corroded or snapped release cords on AXSX swing arms. Alkaline clay soil plus wet-dry exposure eats release cords faster than you’d expect. We replace them with heavy-gauge aftermarket hardware that outlasts the factory spec in Fort Worth’s soil chemistry.
- Battery drain or solar panel mismatch on AXSX kits. When a gate is out of plumb, it cycles more often and the solar panel can’t keep up. We see dead batteries on AXSX solar kits regularly in Fort Worth, and the fix usually starts with gate realignment, not just a new battery.
- Latch keeper and drop rod corrosion on older wrought-iron estate gates. West-side Fort Worth has a lot of large-lot properties with ornamental iron gates whose hardware predates modern operators. The clay holds moisture against those parts year-round. We cut out corroded keepers and weld in replacements on site, so the gate never leaves your driveway.
Ghost Controls Service in Fort Worth: What Local Conditions Mean for Your Equipment
Fort Worth sits on Blackland Prairie clay that expands over 10% from dry to soaked. That’s not a footnote; it’s the single biggest driver of Ghost Controls repair calls we take. A Ghost Controls gate set plumb in August routinely needs a 3/4-inch post lift by January. That shift throws the drive-arm geometry off just enough to trip the safety reverse on every cycle, even when nothing on the opener is broken. You won’t see the same repair rhythm in Dallas’s rockier eastern half. In Fort Worth, we treat post-heave realignment as a standard seasonal service, not an oddity. After the January 2023 ice storm, our crew reset a Ghost Controls TDS2 on a Ridglea Hills double swing gate where glaze ice had twisted the limit switch bracket and the post had heaved 5/8 inch. We cut and re-welded the mount, replaced the limit switch with a factory unit, and re-plumbed the post with compacted lime-stabilized fill. The gate has cycled clean through the wet spring since, no false reverses.
Ghost Controls Models & Products We Service in Fort Worth
We cover the full Ghost Controls lineup that shows up in Fort Worth driveways and ranch entries: the TSS1 and TDS2 heavy-duty swing gate openers, the AXSX solar and cellular dual gate operator kits, the AXSL slide gate motor assemblies, and single or dual swing kits built around the AXD2 automotive-style gearbox. For electronic and load-bearing failures we use genuine Ghost Controls control boards, arms, and limit components. For hinges, brackets, and rollers, we install heavy-gauge aftermarket steel that beats the factory spec in Fort Worth’s windy, clay-heavy setting. And when a rusted or heaving gate makes a full replacement cheaper long-term than nursing a tired operator, we tell you that plainly instead of selling you a repair that won’t hold. We’re a full-service shop for Ghost Controls sales & service, and we keep common parts stocked locally so most Fort Worth repairs don’t wait on shipping.
Ghost Controls Service Pricing in Fort Worth
Ghost Controls repairs in Fort Worth typically run $185 to $420 depending on what failed. Limit switch replacement usually lands on the lower end. Motor replacement with arm re-alignment runs higher, especially on double swing gates. Post reset and re-plumb work starts around $250 and goes up with the size of the gate and how much concrete needs cutting. Every job gets a written, line-item price before any work starts, and that price doesn’t change at the door. We don’t charge a trip fee inside the county, and right now you can take $40 off any repair over $200. We also offer a free second opinion on any written estimate you’ve received from another Fort Worth shop. Seniors and veterans get a standing 10% discount. Call (817) 241-4067 for a free estimate.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Fort Worth
Your gate is reversing because the post has heaved in the clay and the drive arm is binding, not because the opener is confused. Fort Worth’s Blackland Prairie soil swells when wet and pushes the post up, which changes the geometry and tricks the safety reverse into triggering. We re-plumb the post and the false reversing stops. Call (817) 241-4067 and we’ll pull the post back to plumb and check the arm stroke while we’re there.
Yes, and we’ve done plenty of them. Those storms glazed the actuator arms with ice, so limit switch brackets twisted or plastic housings cracked when the opener tried to cycle. We replace the limit assembly with a factory unit, re-align the arm, and the opener works through the next storm without binding.
For most Fort Worth homeowners, yes, especially if you’re out near the open western stretches where power restoration takes longer after an ice event. The harder question is whether your current panel can accept a clean battery input or whether you need a solar-ready retrofit like the AXSX battery setup. We’ll check the panel and tell you what’s realistic without overselling you a kit that won’t integrate cleanly. Call (817) 241-4067 and we’ll take a look.
By correcting the post, not just shimming the hinge. The grinding means the gate has dropped or the post has moved enough that the swing path scrapes the apron. We reset the post in compacted lime-stabilized fill, re-hang the gate, and then test the opener’s open and close limits. That’s the full fix. A quick hinge adjustment alone will fail again by spring because the clay is still moving.
Depends on what killed it. If the hinge post has heaved and the gate dragged for two seasons, the motor is probably burned out from fighting the load. In that case the bracket first, then the motor, and only the parts that actually failed. But if the post is fine and the gate swings freely by hand, a motor replacement is usually all you need. We’ll tell you straight after seeing it, and you won’t pay for parts you don’t need. Call (817) 241-4067 for a free estimate and we’ll give you a straight answer.
Service Areas Near Fort Worth
We run Ghost Controls repair calls throughout the Fort Worth side of the metro. That includes Fort Worth service area neighborhoods like Ridglea Hills, Wedgwood, Fairmount, and the Alliance corridor, plus the surrounding cities: North Richland Hills, Southlake, Colleyville, Hurst, and Irving. For specific availability in nearby towns, see our pages for Ghost Controls service in Southlake and Ghost Controls service in North Richland Hills.
Book Your Ghost Controls Service in Fort Worth Today
Your Ghost Controls opener is fixable, and we can get someone out to look at it fast. Call (817) 241-4067 for a free estimate, and if it’s urgent, tell us and we’ll work you in same day when the parts are on the truck. Hal Gatewood’s name is on the shop, and the shop is down the road. If we hand you our number, use it, that’s what it’s there for.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001.