Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFAAC Gate Access Control in North Richland Hills: What to Know First
FAAC gate access control in North Richland Hills comes down to three things: the board, the wiring, and the actuator. We repair all three, usually same-day, and we tell you the price before we touch anything. Most FAAC access problems here are panel faults or limit switch failures, not full system replacements.
This page is for FAAC owners in North Richland Hills who need keypad entry, remote control, phone entry, card readers, video intercom, or smart access working again. If you’ve got a gate that won’t open or a keypad that quit, call (817) 241-4067. A live person answers, day or night.
How FAAC Products Fail - and How We Fix Them
FAAC builds solid industrial hardware, but North Richland Hills weather has a way of finding the weak spots. Here’s what we actually see when we show up:
- FAAC 455 D control board relay failure: The 455 D is the most common FAAC board in local residential gates, and its relay contacts wear down after years of cycling. The symptom is a gate that hums but won’t move, or a keypad that beeps and does nothing. We test the relay with a meter before quoting a board replacement. About half the time, a relay swap fixes it for under $100 instead of a $600 board.
- FAAC 844 limit switch drift: The 844 series uses mechanical limit switches that drift with temperature swings. In North Richland Hills, where it’s 100 in August and below freezing in January, that drift is worse than FAAC’s own manual suggests. You’ll see the gate stop short or over-travel. We recalibrate and, if the switch is tired, replace just the switch rather than the whole assembly.
- FAAC E024U controller corrosion: This board sits in a housing that wasn’t designed for Texas humidity plus sprinkler overspray, and we see corrosion on the terminal strip constantly. The gate intermittently ignores the keypad or the intercom. We clean and reseal the terminals and, when needed, re-tin the connections. A lot of companies will sell you a new board. We fix the one you have if it’s fixable.
- FAAC hydraulic pump oil leaks on older 400 series operators: These are workhorse operators, but the seals harden over time, and the pump weeps oil onto the gate track. You’ll notice the gate opens slower than it used to. We reseal on site in most cases. It’s messy work, but it’s a $200 fix instead of a $2,000 operator replacement.
- Photocell wiring chewed by Texas critters: FAAC safety photocells have low-voltage wiring that runs through PVC conduit. Squirrels and rats along the Smithfield Road corridor love that conduit. The gate reverses for no reason, or refuses to close. We repair the splice, rerun the wire section, and test the safety loop before we leave. No gate job is done until the safety edge and photocells are proven working.
Our FAAC Gate Access Control Process
When you call (817) 241-4067 about a FAAC access problem, here’s what happens:
- 1
We answer. A live person, every time. You tell us what the gate is doing or not doing. We ask enough questions to figure out which FAAC system you have and whether this is an emergency.
- 2
We diagnose on site. We check the board for error codes, test voltage at the actuator, and verify the limit switches and photocells. We don’t guess and we don’t throw parts at the problem.
- 3
We quote before we touch it. You get the price in writing before any repair starts. If it’s a $60 limit switch fix, that’s what you pay. If it’s a board replacement, you’ll know exactly what the board costs and what our labor is.
- 4
We do the work in your driveway. For most FAAC repairs, we weld, splice, calibrate, and test right there. We’re not hauling your gate to a shop. The only time we leave with something is if a part needs to be ordered, and we try to stock the common FAAC boards and switches on the truck.
- 5
We test the full access loop. Keypad works, remote works, intercom rings, safety edges stop the gate, photocells catch a person walking through. All of it.
- 6
You get the 90-Day Done Right Promise in writing. If the problem comes back within 90 days, we come back. One call. No runaround.
What FAAC Gate Access Control Costs in North Richland Hills
Here’s what FAAC access control work typically runs in North Richland Hills, in plain numbers:
- Keypad entry repair or replacement: $150 to $450. A burned keypad often just needs a new faceplate or wiring. A full keypad replacement with programming lands around $300 to $450.
- Remote control programming or receiver repair: $75 to $200. Most FAAC receiver issues are antenna corrosion or a dead receiver board. Reprogramming existing remotes is on the lower end.
- Phone entry or intercom system fix: $180 to $550. Phone entry systems fail at the transformer, the relay, or the SIM card tray. We diagnose before we quote parts.
- Card reader installation or troubleshooting: $250 to $700 depending on whether you need a standalone reader or integration with an existing FAAC board.
- FAAC control board repair or replacement: $95 for a relay-level repair up to $650 for a full board. We always try the lower-cost fix first.
- Full video intercom or smart access upgrade: $900 to $2,200 depending on the system and wiring run.
What moves the price is parts, the age of your FAAC unit, and how far we have to run wire. Every quote includes labor. You agree to the price before we start, and senior and veteran discounts take 10% off any bill over $100. Estimates are free inside the county.
Why North Richland Hills Homeowners Call Gatewood Fence & Gate for FAAC Work
Hal Gatewood has been fixing gates in North Richland Hills since 2001, and he still lives off the Smithfield Road corridor. That’s not a marketing line. His address is published, his name is on the shop, and on most FAAC jobs he’s the one holding the meter. No dispatch queue, no faceless crew. You’ll see the same person from the first call to the final test.
We’re independent FAAC service providers. We don’t work for FAAC and we don’t push you toward a brand-new operator unless yours is genuinely done for. We fix gates other companies want to replace, and we stand behind the work with the 90-Day Done Right Promise in writing. If you have a FAAC board acting up and you’re not sure whether a national outfit quoted you fair, bring us their written estimate. We’ll give you a second opinion free. We also service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so if your property has more than one brand on it, we can handle all of them the same day.
FAQs
We repair FAAC systems that are still under manufacturer warranty by doing the labor, but we are an independent FAAC service provider, not an authorized warranty station. If your FAAC unit is still covered, call FAAC first for parts coverage. If they tell you they’ll send a part, we can install it. If you’re out of warranty, we repair it ourselves with OEM or proven aftermarket parts, and we tell you which one we’re using before we order it.
Most FAAC keypad repairs in North Richland Hills are done the same day. Keypad failures are usually wiring, a dead transformer, or a failed relay on the control board. We stock the common FAAC relays, transformers, and keypad components on the truck. For a rare keypad model we have to order, it’s typically a two-to-three-day wait. Call (817) 241-4067 with your FAAC model number and we can tell you what we’ve got.
It depends on the part. For control boards, limit switches, and safety components, we prefer FAAC OEM because the tolerances match the system. For relays, transformers, and wiring hardware, we use commercial-grade aftermarket parts that perform as well or better at a lower cost. If we recommend an aftermarket part, we’ll show you the spec sheet and explain why it’s the better call. You’re never paying for a FAAC logo on a generic capacitor.
If the frame, hinges, and gate structure are sound, an old FAAC hydraulic operator is almost always worth repairing. FAAC 400 series hydraulic units are designed to run for 20-plus years with regular seal and fluid maintenance. We replace more FAAC systems because the gate itself is sagging or the driveway has shifted than because the operator is truly worn out. Before you spend $3,000 on a new system, let us inspect the whole setup. If it’s fixable, we’ll tell you. If it’s not, we’ll show you what we saw and give you an honest replacement price.
For an emergency, we can typically get to you the same day, often within a few hours. For non-emergency FAAC access control work in North Richland Hills, we’re usually there within one to two business days. We don’t schedule a window and then show up late. If we say Tuesday at 9, that’s when you’ll see the truck. If it’s after hours and your gate is stuck open with your dog in the yard, call (817) 241-4067 anyway. Hal or a crew member will answer.
Written by Hal Gatewood, Owner, Gatewood Fence & Gate at Gatewood Fence & Gate, serving North Richland Hills and nearby areas.