Ghost Controls Gate Repair Nationwide | Gatewood Fence & Gate

Ghost Controls Gate Repair in North Richland Hills: What to Know First

Ghost Controls gate repair in North Richland Hills usually means one of three things: the opener quit mid-travel, the gate drifted out of alignment, or a hinge post finally gave way. We fix all three, most of the time in one trip. A typical Ghost Controls repair on a single swing gate runs between $185 and $420 depending on what let go, and we quote the price before we turn a wrench. If your gate won’t move, won’t stop, or won’t stay closed, call (817) 241-4067 and we’ll talk it through.

Call (817) 241-4067

This page is for homeowners in North Richland Hills who bought a Ghost Controls opener and found out the hard way that gates don’t fix themselves. Hal Gatewood has been working on Ghost Controls hardware since the brand started showing up on local driveway gates, and the diagnosis is usually faster than you’d expect. We’re an independent service provider, not a Ghost Controls dealer or authorized warranty center, which means we tell you the truth about what’s broken without a sales pitch attached.

How Ghost Controls Products Fail - and How We Fix Them

Ghost Controls makes solid openers, but every brand has its habits. Here’s what we see most often on Ghost Controls gates around North Richland Hills:

• AXDP and AXD series openers losing their travel limits. The control board forgets where the gate should stop, so the gate slams into the post or stops six inches short of closed. This happens more after power flickers from spring storms. We reset the limits and check the arm geometry so it doesn’t happen again.
• RPB and RPK receiver boards failing after 4-6 years. The gate stops answering the remote, but the manual open button still works. That’s almost always the receiver circuit, not the remote. We test the board, replace it with OEM when warranty matters and a quality aftermarket when it doesn’t, and reprogram all your remotes before we leave.
• The classic Ghost Controls hitching sound at the start of travel. You press the button, nothing moves for a second, then the gate jerks. That’s the actuator clutch slipping, and it’s almost always a bent or loosely pinned arm, not the motor. We straighten the arm or cut and weld a new one on site, which is cheaper than a new opener and keeps your gate in the driveway where it belongs.
• Ghost Controls solar kits losing charge in the shade. North Richland Hills has plenty of mature oaks, and a solar panel that worked in July can starve a battery by January when the sun sits lower. The battery dies before the panel does. We test the panel output and the battery load separately, so you’re not buying a whole new kit when a $90 battery fixes it.
• Hinge post sag on heavy Ghost Controls gates. The opener pushes a gate that weighs three hundred pounds, and the hinge post takes every bit of that force, every cycle, for years. Weed treat this first, not last: a gate that sags binds the opener, burns the motor, and kills the board. We cut out worn hinges, weld in new ones, and realign the post before we even plug the opener back in.

Our Ghost Controls Gate Repair Process

Here’s how a Ghost Controls job goes when you call us in North Richland Hills:

1. 1
   You call (817) 241-4067. A live person answers, not a queue. You tell us the symptom. Most of the time we can narrow it down to two or three suspects before we even head out.
2. 2
   We show up when we said we would. Inside the county, there’s no trip charge. We test the opener, the arm, the battery or solar, the hinges, and the receiver in that order. Ten minutes usually tells us what a previous installer might have spent two visits missing.
3. 3
   We quote before we touch anything. The price is agreed on before work starts. If it’s a bearing, a board, or a weld, you’ll know the number. No surprises at the door.
4. 4
   We repair what’s actually broken. Ghost Controls parts are easy to find, and we stock the common failure items on the truck: limit switches, receiver boards, remote transmitters, and arm hardware. We use OEM parts when the opener is still under warranty and honest aftermarket parts when it makes more sense for your budget.
5. 5
   We test it through at least ten full cycles. Open, close, obstruction, remote, manual release, and battery backup if you have one. We don’t call it done until the gate does what it’s supposed to do, every time, while we’re standing there watching.
6. 6
   You get the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. Not a manager, not a phone tree. Us.

What Ghost Controls Gate Repair Costs in North Richland Hills

Most Ghost Controls repairs in this area land between $185 and $420. Here’s the honest breakdown by job type:

• Reset travel limits and adjust arm geometry: $95-$150
• Replace receiver board or transformer: $210-$340
• New actuator arm or hinge weld repair: $185-$390
• Solar panel or battery replacement: $120-$280
• Full opener replacement (parts and labor): $600-$950

The price moves based on the opener age, whether the hinge post needs welding, and how far back the gate was installed from a power source. You get the number before we start, and we subtract $40 off any repair over $200. Every estimate is free. Call (817) 241-4067 and we’ll give you a real number for your gate, not a range printed on a flyer.

Why North Richland Hills Homeowners Call Gatewood Fence & Gate for Ghost Controls Work

Hal Gatewood has been repairing gates in North Richland Hills since 2001, and the shop is right down the road with his name on it. The 90-Day Done Right Promise is stamped on every invoice, plain as day, and it means what it says: if the repair doesn’t hold, we come back and make it right. We don’t haul your gate to a shop. We weld on site, in your driveway, so you’re not paying freight on a repair that didn’t need a flatbed. When a Ghost Controls opener isn’t worth fixing, we’ll tell you that too, and we can talk you through the alternatives: we service LiftMaster, Mighty Mule, and DoorKing as well, so if a different brand is the better call for your gate, you’ll hear that from us, not from an ad.

FAQs