Ghost Controls Gate Access Control Nationwide | Gatewood Fence & Gate

Ghost Controls Gate Access Control in North Richland Hills: What to Know First

Ghost Controls gate access control in North Richland Hills comes down to three questions: what failed, whether the part is still under warranty, and whether it’s worth repairing or replacing. We’re an independent Ghost Controls service provider, and most jobs we see are fixed same-day or next-day once we put eyes on the opener. Call (817) 241-4067 and Hal Gatewood will answer, tell you what he thinks over the phone, and give you a straight price before anyone rolls a truck.

Call (817) 241-4067

This page is for homeowners in North Richland Hills who already own a Ghost Controls opener and have a dead keypad, a remote that stopped talking to the board, or an intercom that quit buzzing. We’ll tell you what fails on these units, why it fails, and what we charge to fix it.

How Ghost Controls Products Fail - and How We Fix Them

Ghost Controls makes a dependable opener, but they have their own set of habits. Here are the five we see most often in North Richland Hills driveways:

• Keypad membrane failure on the AXS1 and AXS2 lines. The rubber buttons on the AXS1 keypad dry out and crack after a few Texas summers, and once one button goes, water sneaks in and shorts the board. We replace the whole keypad housing, not just the rubber, because the seal is already compromised. A used keypad off eBay will fail the same way in six months.
• Receiver board corrosion on the VKP1 and TSS1 series. Ghost Controls boards don’t love sitting in a metal box that bakes in the afternoon heat and cools off fast at night. Condensation forms inside the control box, and eventually the receiver section stops hearing remotes even though the keypad still works. This reads like a remote problem, but it’s the board. We test before we order parts so you don’t buy new remotes for nothing.
• Remote interference from the newer Ghost Controls units. The GATE1 and AXDP series run on a frequency that overlaps with some garage-door openers and LP tank monitors common around North Richland Hills. You’ll notice the gate opens fine at 9 a.m. but won’t budge at suppertime. That’s not a weak battery. We re-channel the unit and relocate the antenna lead, and it solves the problem most of the time.
• Plug-in transformer burnout. The little wall-wart transformer Ghost Controls ships with their DIY kits runs hot, especially in unconditioned garages, and when it dies the whole system goes dark. We swap in a heftier transformer with proper amperage headroom and hardwire it where code allows, so you’re not standing at the gate at 6 a.m. with a dead unit and a dog that needs out.
• Limit switch drift on the SLC and GATE1 lines. Ghost Controls openers from about 2017 to 2021 had limit switches that would creep over time, so the gate opens a little less every week until it’s barely swinging at all. Homeowners think the battery is dying or the motor is shot. It’s usually a five-minute recalibration, and we do it while we’re there. No parts, no upsell.

Our Ghost Controls Gate Access Control Process

Here’s what happens when you call us about a Ghost Controls access problem in North Richland Hills:

1. 1
   You call (817) 241-4067. Hal answers. You tell him what the gate is doing, or not doing, and he asks a few questions that usually narrow it to two or three possibilities.
2. 2
   We set a window. We show up in that window. We test the keypad, remote, receiver, transformer, limits, and wiring before we touch anything.
3. 3
   We tell you what we found, what it costs, and what the options are. OEM part or quality aftermarket, repair or replace. The price is quoted and agreed before any work starts. That’s a promise, not a sales tactic.
4. 4
   We do the repair on-site. If it needs welding, Hal does the welding right there in your driveway. No hauling your gate to some shop across town.
5. 5
   We test the whole system: open, close, auto-close, keypad, every remote, every safety edge. If it doesn’t all work, the job isn’t finished.
6. 6
   We hand you the invoice with the 90-Day Done Right Promise on it in writing. If it’s not right, one call brings us back.

What Ghost Controls Gate Access Control Costs in North Richland Hills

Straight numbers, the way we quote. Ghost Controls access control repair in North Richland Hills generally runs:

• Keypad replacement (parts and labor): $140-$220
• Receiver board replacement: $180-$290
• Remote programming or re-channeling: $65-$110
• Full system diagnostic (no repair): $85-$125
• Complete Ghost Controls access upgrade (keypad, receiver, two remotes): $450-$750

What moves the price: whether we’re working with an OEM Ghost Controls part or a quality aftermarket equivalent, the age of the wiring, and whether the old installer left us a mess to untangle. We don’t pad the invoice. We quote before we work, and if we find something unexpected, we stop and call you. Free estimates, and we offer $40 off any repair over $200.

Call (817) 241-4067 for an exact quote on your Ghost Controls system.

Why North Richland Hills Homeowners Call Gatewood Fence & Gate for Ghost Controls Work

Hal Gatewood has been fixing gates in North Richland Hills since 2001, and his shop is down the road, not in a call center. When you call about a Ghost Controls opener, you’re talking to the person who will show up at your driveway. Every job carries the 90-Day Done Right Promise in writing: if it’s not done right, we make it right. No runaround, no arguing.

We service Ghost Controls, and we also work on LiftMaster, Mighty Mule, and DoorKing every week. That matters because half the Ghost Controls systems we see were installed alongside or swapped into an existing opener from another brand, and you want a tech who knows how they’re supposed to talk to each other. We weld on-site, we fix rather than replace when repair is the honest call, and for over 29 years the name on the shop has been the name on the invoice. If I hand you my number, use it - that’s what it’s there for.

FAQs