Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterDoorKing Keypad & Intercom Repair: The North Richland Hills Owner’s Guide
DoorKing keypad and intercom repair in North Richland Hills typically runs $185 to $420 installed, depending on whether we’re rebuilding the keypad, replacing the intercom board, or swapping the whole assembly. We stock DoorKing-compatible keypads and intercom parts on the truck, so most calls get fixed same day. The way it usually starts is small: a key that needs three presses, a visitor’s voice that cuts out, a code that works only when the sun isn’t hitting the box. Then one morning the gate won’t open at all, and the FedEx driver is leaning on the horn out on the street.
Key Takeaways
- DoorKing keypads and intercoms fail gradually; catching the early signs saves the control board.
- We carry OEM and quality aftermarket DoorKing parts on the truck and match them to your exact model.
- Upfront pricing, quoted before we turn a screw, backed by the 90-Day Done Right Promise.
- Call (817) 241-4067 and a live person answers, day or night.
Which DoorKing Models This Applies To
Most of what we see in North Richland Hills driveways falls into three DoorKing lines: the 1800-series telephone entry systems, the 6000-series and 9000-series keypads, and the older 1500-series intercoms that are short on parts but long on stubborn reliability. Here’s the gotcha a lot of homeowners run into: DoorKing made running changes mid-production, so two keypads with the same model number on the outside can have different ribbon connectors, different faceplate screw spacing, or a different mounting backplate underneath. You can’t always tell from a photo. You have to pop the faceplate and look at the board revision sticker, or measure the cutout if it’s a flush-mount intercom. That’s a ten-second check for us, but it’s the difference between a part that fits and a return trip that burns an hour.
We’ve been an independent DoorKing repair shop in North Richland Hills for years, and we stock both OEM DoorKing parts and proven aftermarket equivalents. The OEM part is always the safest route for control boards and intercom modules, because DoorKing’s board revisions are tight. For keypad faceplates, gaskets, and mounting hardware, a quality aftermarket part does the job for less money, and we’ll tell you which is which before you spend a dime. We also service the other big brands: LiftMaster, Mighty Mule, Ghost Controls, and the rest.
Signs Your DoorKing Keypad & Intercom Is Failing
- Keys need multiple presses or don’t register at all. The membrane or tactile switches under the keypad face wear out first, especially on south-facing gates in our Texas sun. The UV eats the outer layer, then moisture gets in and corrodes the contacts.
- Visitor audio cuts out or sounds like it’s underwater. The intercom speaker cone dries out and cracks after a few years of heat cycling, or the microphone gets clogged with dirt and dead bugs. If you hear humming but no voice, the amplifier circuit on the intercom board is usually the culprit.
- Gate opens randomly or won’t respond to the keypad at all. This one makes people nervous, and it should. It usually means the keypad’s relay is sticking, or a failing bridge rectifier is sending dirty power back to the DoorKing control board and confusing it.
- Faceplate is cracked, fogged, or the buttons feel loose. The plastic has given up. Once the faceplate cracks, the gasket beneath it loses compression and water gets to the board. This is the single most common failure we see on older DoorKing keypads in North Richland Hills.
- One entrance works, the other doesn’t, or the code only works sometimes. Could be a failing wire splice, a corroded terminal block inside the keypad housing, or a relay that’s seen one too many lightning storms. We trace it with a meter, not a guess.
Replacement Cost & What’s Included
For DoorKing keypad and intercom repair in North Richland Hills, here’s what our pricing looks like:
- Keypad faceplate and gasket replacement: $185 to $260 installed
- Intercom board repair or replacement: $260 to $340 installed
- Complete keypad assembly swap: $300 to $420 installed, depending on the model
- Control board diagnosis and repair: quoted on site, always before we start
The range depends on which DoorKing series you have, whether we can rebuild the existing part or need a fresh one from stock, and whether we’re pulling new wire. Every quote includes parts, labor, testing, and a written explanation of what failed and why. The price we quote in your driveway is the price on the invoice. No trip charge inside the county, and every job carries our 90-Day Done Right Promise in writing. Seniors and veterans get 10% off, always, no haggling needed.
DIY or Call Us?
There’s a short list of things an owner can safely check before picking up the phone: confirm the power to the gate opener is on, look at the keypad faceplate for obvious cracks or water inside the lens, and check whether the gate still opens with the remote or the wall button. That last test tells you whether the problem is the keypad, the intercom, or the opener motor itself. But once you’re inside the keypad housing, you’re working with low-voltage wiring on a system that shares a cabinet with 120-volt components, and the DoorKing control board doesn’t forgive a short. If you’re spending more than a lap around the driveway with a flashlight, that’s the point to stop. Call us. If I hand you my number, use it, that’s what it’s there for. We’re at (817) 241-4067.
FAQs
In our climate, a DoorKing keypad faceplate averages five to eight years before the UV and our summer heat start breaking down the plastic, and the intercom speaker usually gives up somewhere in that same window. Units in full shade last longer; units facing south or west die sooner.
Often, yes. If the board is clean and the relay tests good, we can usually rebuild the keypad with a new faceplate, gasket, and switch assembly for less than a full replacement. If the board itself is corroded or fried, repair stops making financial sense and we’ll tell you that plainly.
Most keypad faceplate and gasket replacements take 45 minutes to an hour on site. A full intercom or keypad assembly swap can run 90 minutes to two hours. We carry the common DoorKing parts on the truck, so most North Richland Hills calls are one visit, done same day.
We stock DoorKing-compatible keypads, faceplates, gaskets, intercom boards, and control components on the service truck, and we maintain a full parts bench at the shop. For unusual or obsolete DoorKing models, we can source the right part and have it in hand before we schedule the repair. Call (817) 241-4067 and we’ll tell you over the phone whether we have your part today.
Call Gatewood Fence & Gate for DoorKing Repair in North Richland Hills
If your DoorKing keypad or intercom is acting up, call us at (817) 241-4067. A live person answers, day or night, not a voicemail or a call center. We’ll ask what the gate’s doing, we’ll show up in the window we promise, and we’ll give you a written price before any work starts. Hal Gatewood’s name is on the shop and on every invoice, and he’s been fixing gates in North Richland Hills since 2001. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner, Gatewood Fence & Gate at Gatewood Fence & Gate, serving North Richland Hills and nearby areas.