Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterElite Keypad & Intercom Repair: The North Richland Hills Owner’s Guide
If your Elite keypad or intercom has stopped responding, most North Richland Hills homes need a replacement keypad or control board installed for $240 to $480, and we can usually get it done the same day we look at it. We stock Elite-compatible keypads, intercom modules, and control boards on the truck, so we’re not running back to a supply house while your gate stays dead. The typical call starts with, “The keypad lights up but the gate won’t move,” or “I can hear the intercom crackle but nobody can hear me talk.” Either way, we find the failed part and swap it, usually right there in your driveway.
Here’s the reality with Elite gate systems in our part of Texas: the electronics fail before the mechanicals do. North Richland Hills summers bake the keypad housings until the membrane keys get brittle, and the humidity finds its way into intercom boards that weren’t sealed as well as they should’ve been. If you’ve got an Elite system that’s five years old or more and it’s acting up, the part is probably telling you something. And if you’ve had a previous company out here that told you to replace the whole gate opener over a dead keypad, we’d like a word. That’s not how we work.
Key Takeaways:
- Elite keypad and intercom repair in North Richland Hills typically runs $240 to $480 installed
- We carry Elite-compatible parts on the truck and can usually do the repair same day
- You’re not paying for a gate code panel that doesn’t need replacing; we diagnose the actual failed part
- All work carries the 90-Day Done Right Promise, in writing
Which Elite Models This Applies To
Elite has put out several keypad and intercom lines over the years, and the part that fits one won’t necessarily fit another. We regularly work on Elite SL-3000 and MiM (Miracle) series openers, the Classic series, and the newer PR-1 and CK keypad lines. The keypad on an SL-3000 from 2012 is not the same part as the keypad on a MiM from 2019, even though they look close enough to fool you from ten feet away. For intercoms, Elite has used both flush-mount and surface-mount stations, and the wiring pinouts changed between generations.
How to identify what you’ve got: open the keypad housing and look for a sticker on the back of the circuit board. Elite prints a part number there, something like CK-1, CK-2, or a longer alphanumeric. On intercom modules, the part number is usually on the back of the faceplate or inside the weatherproof boot. We match off that number, not off a picture. If the sticker’s faded (sun-baked garage doors and gates in North Richland Hills do that), we can still identify it by the connector style and wire colors. For Elite specifically, OEM parts are our first choice, but there are two aftermarket keypad lines we’ve installed enough times to trust. We’ll tell you the price difference and let you choose. We don’t push the aftermarket option unless it’s genuinely as good.
One more thing: Gatewood Fence & Gate is an independent local shop. We’re not affiliated with Elite and we don’t claim to be. But we’ve been servicing their openers and access systems for over two decades, and we know which parts interchange and which ones fight you.
Signs Your Elite Keypad or Intercom Is Failing
- Keypad lights up but gate doesn’t respond. The keypad membrane is usually fine; the control board relay is the failure point. This is the most common Elite issue we see in North Richland Hills, and the fix is a board swap, not a whole new opener.
- Some keys work, others don’t. Classic membrane wear. The carbon contacts under the buttons degrade, especially on gates that face west and catch direct afternoon sun. A new keypad takes care of it.
- Intercom audio is one-way or crackling. Moisture has gotten into the speaker or the handset module. North Richland Hills gets enough humidity swings that a poorly sealed intercom faceplate is a slow death sentence.
- Keypad works sporadically, worse after rain. Water is intruding into the wiring at the keypad housing. If your keypad sits in the weather without a shade hood, this will keep happening until we fix the seal and replace the damaged wiring.
- Gate opens on its own or won’t close after a visitor uses the intercom. The intercom’s relay is sticking, or a wiring short is sending phantom signals. Left unchecked, this can damage the main control board, which turns a $200 part into a $400 one.
Replacement Cost & What’s Included
In North Richland Hills, installed Elite keypad replacement runs $240 to $340. A full intercom module replacement (intercom station plus the control interface) runs $320 to $480. A repair rather than a full replacement, like a bad relay or corroded wire run, lands between $140 and $230. What drives the spread: whether you need just the keypad or also the control board, how far the wiring run is, and whether we’re matching OEM Elite parts or one of the quality aftermarket options. You’ll know the exact price before we touch a single wire. That’s how it’s been since 2001.
Every part we install is covered by our 90-Day Done Right Promise. If it fails within 90 days, call us and we’ll come back and make it right. No forms, no phone tree, no “let me check with the office.” You call, we answer, we fix it. And if you’re over 65 or a veteran, you get 10% off the repair, every time.
DIY or Call Us?
I’ll be straight with you: swapping an Elite keypad is doable if you’re comfortable with low-voltage wiring, but the mistakes get expensive fast. The most common DIY fail we fix is the person who assumed wire colors are universal. Elite didn’t always follow a consistent color code between the keypad and the control board, and we’ve seen homeowners short out a perfectly good board by crossing two wires. That turns a $260 keypad job into a $500 board replacement. If you’re not sure which wire is which, stop and call us.
The honest split: if you’re just tightening loose connections and the keypad works afterward, great, you fixed it. If the keypad is cracked, if water has been inside it, or if the gate still won’t respond after you cleaned the contacts, that’s where you hand it to someone who does this every week. We’ll test the whole circuit before we quote you, so you’re not guessing. Call (817) 241-4067 and describe what it’s doing. Hal or one of the crew will pick up.
FAQs
Five to eight years is realistic for a keypad, and six to ten for an intercom module, depending on sun exposure and whether the previous installer sealed the mount properly.
Sometimes, but it depends on the failure. A bad relay or a loose wire can be repaired; a worn-out membrane or a water-damaged board should be replaced. We’ll tell you which you have before any money changes hands.
Most Elite keypad replacements take 45 to 90 minutes once we’re on site. Intercom modules run closer to two hours if we’re re-doing the wiring run.
We keep the most common Elite keypads and intercom modules on the truck, plus control boards for the SL-3000 and MiM lines. For oddball models we can usually have the part in hand within two business days.
Call Gatewood Fence & Gate for Elite Keypad & Intercom Repair in North Richland Hills
If your Elite keypad or intercom is acting up, call (817) 241-4067. A live person answers, day or night. We’ll ask what it’s doing, tell you what we think over the phone, and set a time that works. There’s no trip charge inside the county, and we welcome a second opinion if you’ve already got a written estimate from somewhere else. Hal Gatewood has been fixing gates in North Richland Hills since 2001, and he’ll be the one standing in your driveway.
Written by Hal Gatewood, Owner, Gatewood Fence & Gate at Gatewood Fence & Gate, serving North Richland Hills and nearby areas.