Frequently Asked Questions - Gate Repair in North Richland Hills, TX
Here's what homeowners across North Richland Hills ask us most about gate repair, answered straight. If you don't see your question here, call (817) 835-6335 and we'll talk you through it.
Pricing & Cost FAQs
Gate repair in North Richland Hills typically runs $185 to $450 for most jobs, with hinge replacements on the lower end and full operator swaps on the higher end. What drives the price is what actually failed: a sagging gate usually needs hinge post work, while a dead opener usually means a new control board or a full motor replacement. We quote the price in writing before any work starts, so you're never surprised by the invoice. Call (817) 835-6335 for a free estimate, and we'll tell you exactly what's wrong and what it costs before you commit.
A gate opener motor replacement in North Richland Hills generally runs $450 to $900 installed, depending on whether we're reusing your existing arm, receiver, and safety edges or replacing the full kit. On a DoorKing or Ghost Controls unit, we can often save the existing receiver and transmitter, which keeps the price down. The motor is usually the most expensive single part on an automatic gate, which is why we test it before quoting replacement. You'll know the exact number before we order anything.
No, we don't charge a trip fee for estimates anywhere in our service area, including North Richland Hills, Hurst, Bedford, and Keller. We come out, diagnose the gate, and hand you a written quote. If you hire us, the estimate visit costs you nothing. If you don't, it still costs you nothing. That's the point of an estimate, and we'd rather you make a decision with the real facts in front of you. Call (817) 835-6335 and we'll set a time.
Two companies can quote very different prices on the same gate because one is quoting a repair and the other is quoting a replacement. A sagging gate panel might need hinge post reinforcement for $200, or a full post reset for $900. A noisy opener might need a $150 gear replacement, or a new operator at three times that. Hal's rule is to repair what other companies want to replace whenever that's the honest fix. Get a written breakdown of parts and labor, and ask whether the quote repairs the actual fault or replaces everything around it.
A complete driveway gate with a new operator, posts, and safety edges typically starts around $2,500 and goes up from there based on the gate style, length, and whether you want automation from day one. Ornamental steel costs more than chain link but lasts longer. The power run, safety loops, and edge sensors are included in our written price, not added later. We measure, order, and schedule installation at a time that works for you. Call (817) 835-6335 if you want a specific number for your driveway opening.
Service & Process FAQs
Same-day repair depends on the fault and our schedule. If your gate is stuck open or your opener is dead, call us at (817) 835-6335 first thing and we'll tell you when we can get a truck to your home. Simple hinge repairs and sensor adjustments often happen same day or next day. A broken hydraulic ram or an operator that needs a part we don't carry on the truck takes a day or two longer, because we order the right part rather than rigging a temporary fix that fails next month.
We repair on site. Hal builds gates in his own shop, and he does the same with repairs: the work happens at your house, not at some facility across town. If a post needs replacing, we dig and set it right there. If a panel needs welding, we weld on site rather than taking your gate away for a fortnight. That means your property stays secure, and you can watch the work happen. It's slower than swapping parts blindly, but it's the repair that lasts. That's how we've worked since 2001.
We show up, inspect the gate from hinge to latch, and diagnose the actual fault before touching anything. Then we give you a written price and do the work only after you approve it. A sagging gate gets its hinge post checked first, because that's where the sag almost always lives. A dead opener gets tested for power, receiver signal, and motor gear wear before we condemn anything. You'll see the failed part before we replace it. Nobody asks you to write a check without knowing exactly what it's for.
Yes. We add a gate operator, a receiver and transformer, safety edges, and whatever a proper power run requires at your property. We quote the entire conversion, including the electrical work, before we begin. Popular operator brands we install include Ghost Controls and DoorKing. Automation is measured and scheduled work, not same-day work: we come measure, give you a written price, then install on a date that works for you. Call (817) 835-6335 for a free measure.
Yes. The power run, the transformer, the photo eyes, and the safety edges are all part of an automatic gate we install or repair. Safety edges matter: a gate closing on its own without working edges is a serious pinch and crush hazard, and we've found edge sensors somebody bypassed more times than we can count. That's the kind of thing that makes a gate fail its inspection or hurt somebody. We wire every safety device properly, and we test it in front of you before we leave.
Brands & Parts FAQs
We repair and install all the common brands found in North Richland Hills and the surrounding cities: Ghost Controls, DoorKing, Elite, and Mighty Mule, among others. Parts availability and brand reliability both factor into how we quote. On an older DoorKing or Elite unit, we often find the control board has failed but the motor is still strong, so we replace only what's dead. If you have a brand we don't stock parts for, we'll tell you honestly and order what's needed instead of improvising.
We keep the most common repair parts in our trucks and shop: hinges, receiver boards, safety edges, photo eyes, and openers for popular makes like Ghost Controls and Mighty Mule. But no shop stocks everything. If your operator needs a control board or a motor that's out of stock, we order it and come back. You're not waiting weeks. We call you the day the part lands and schedule the install. Need a specific part? Call (817) 835-6335 and we'll check inventory while you're on the phone.
It depends on the opener. If the motor is still strong and only the control board or a gear has failed, repairing is usually the honest call, and it costs less. If your unit is fifteen plus years old and parts are discontinued, replacement makes more sense. Hal's bias is always repair first, because he'd rather keep your existing gate working than sell you a new operator you didn't need. We'll show you the failed part, explain its age and wear, and let you decide with real numbers. No pressure.
Licensing & Insurance FAQs
Every pro working under our name is required to hold the license and insurance their state requires. We're a local branch of Gatewood Fence & Gate, and we carry the coverage a legitimate gate repair company in Texas should carry. If you want proof, ask and we'll show you before any work begins. Hal Gatewood puts his name on the company, and the guarantee is in writing. That's the standard the brand has held since 2001. No fine print, no runaround.
Most automatic gate installations in North Richland Hills don't require a building permit, but some neighborhoods with HOA deed restrictions have rules about gate height, setback, and finish. If your property is in an HOA, check the covenant before you commit to a design. We've worked in communities across North Richland Hills, Fort Worth, Southlake, and Colleyville, and we'll flag any obvious local requirement we know about. When a permit is needed, we point you to the right office or we handle it, depending on the job.
We run a local team of people we know by name, not strangers we picked up that morning. The faces we send to your home are the same faces that live in this county. Every pro working under our name is required to hold the license and insurance their state requires. Hal Gatewood's name is on the truck, on the shop, and on the work. That's the oldest accountability mechanism there is: he's going to run into you again on a Saturday. We don't hide behind a call center.
Emergency & Response FAQs
Sometimes, yes. A gate stuck open is a security emergency. A gate half closed with kids or pets in the yard is a safety emergency. A gate that simply won't open when you need to get out is urgent too. For urgent calls during our open hours, which are 7:00 AM to 8:00 PM Monday through Friday and 7:00 AM to 7:30 PM Saturday and Sunday, we treat your job with priority. Call (817) 835-6335 the moment you know something's wrong, and we'll tell you what comes next.
First, don't try to force a motorized gate closed by hand. The operator and the gearbox can fight you, and that's how people get hurt. If the gate is stuck open and it's outside our business hours, secure the opening as best you can, then call us the next morning at (817) 835-6335. We open at 7:00 AM. If the gate is stuck open during business hours, call immediately and we'll prioritize the call. A stuck open automatic gate is a security risk, and we treat it like one.
Yes. We're open 7:00 AM to 7:30 PM on Saturday and Sunday, and we serve Hurst, Bedford, Keller, Euless, and the rest of our service area on weekends the same as weekdays. If your gate fails on a Saturday morning and you call us at (817) 835-6335, a live coordinator answers and connects you with the local team. We can't promise a same-day repair every single weekend, because some parts simply can't be sourced on Sunday, but we tell you honestly what's possible when you call.
Yes. We regularly work in Colleyville, Grapevine, Southlake, and the other cities in the mid-cities area around North Richland Hills. We live twenty minutes from most of the driveways we work on, which means we can give you a straight answer about timing when you call. No three hour windows, no showing up without a call. If we say we're coming, we're coming. Call (817) 835-6335 and a live person will tell you what day and time works.
Warranty & Guarantees FAQs
Yes. Every fence and gate job we do carries ninety days in writing, and one call brings us back. Hal Gatewood publishes his name, his address, and his license number and answers his own phone. That's the promise behind the work, and it has been since 2001. If a repair fails inside the warranty window, we return and make it right at no charge. No hoops, no forms to fax, no hotline. You call the same number you called the first time.
The guarantee covers the parts and labor on the repair we did. If a hinge we installed fails, we replace it. If a control board we wired gives out, we make it right. What it doesn't cover is new damage to a different part, or someone driving into the gate. That's a different conversation. But if the repair itself doesn't hold, you call (817) 835-6335 and we come back. In writing, on every job. That's the Gatewood standard.
Yes, and that's exactly what the guarantee is for. A gate sags in the hinge post, not in the middle. If we repaired or reinforced that post and the gate starts sagging again inside ninety days, we come back and fix it properly at our cost. If the sag is coming from something else, like a concrete footer that's shifted since we left, we'll diagnose it honestly and quote a fair repair. Either way, you'll get a straight answer from a face you've already met. We'd rather keep you for twenty years than win one big ticket.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Richland Hills and the mid-cities area since 2001.
Still Have Questions?
We are happy to help. Call us - same-day and after-hours emergency service available.
(817) 835-6335