Hinge & Post Repair in North Richland Hills, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Hinge & Post Repair in North Richland Hills, TX

If your gate is dragging on the driveway, won’t latch properly, or looks like it is leaning toward the street, you typically need hinge or post repair. In North Richland Hills, a standard hinge or post alignment repair usually costs between $180 and $450, depending on whether we need to re-weld a hinge, adjust the post footing, or reinforce the concrete base. We can usually provide a firm quote over the phone or during a quick visit, and we offer a 90-Day Done Right Promise on all work. If you are dealing with a gate that just won’t close, you may need Lock Repair-call us at (817) 241-4067 to get a free estimate.

I have been fixing gates in this area since 2001, and I can tell you that most problems start at the post, not the panel. When I see a homeowner struggling with a gate that refuses to swing, they often think they need a new opener or a new gate entirely. Usually, that is not the case. The issue is almost always a post that has shifted due to our local clay soil or a hinge that has fatigued after years of North Texas heat cycles. At Gatewood Fence & Gate, we specialize in Gate Repair that focuses on these root causes rather than just slapping a band-aid on the symptom.

The name on the shop is mine, and I have been doing this long enough to know that if you don’t fix the post, you will be fixing the gate again in six months. We are locally owned and owner-operated, which means when you call us, you aren’t getting a call center or a dispatch queue. You are getting a team that knows the streets of North Richland Hills and knows how to do Weld & Rust Repair in a way that lasts. Whether you have a heavy iron gate or a standard residential unit, we have the tools to fix it in your driveway.

When You Need Hinge & Post Repair

A gate is only as strong as the post it hangs from. In North Richland Hills, our soil is notorious for expanding and contracting with the rain and the heat. This movement puts immense pressure on your fence line. If you notice any of these signs, it is time to have a professional take a look before the damage gets worse.

• The gate drags on the pavement: This is the most common sign. If you see a semi-circle scratched into your driveway, your hinge is likely failing or your post is tilting, causing the gate to drop.
• The gate won’t latch: If the latch pin misses the receiver, the gate has shifted. Sometimes this is a simple adjustment, but often it indicates the post has moved out of plumb.
• Visible gaps at the hinges: If you see daylight between the hinge pin and the bracket, or if the metal is showing signs of stress fractures, the structural integrity is compromised.
• The gate swings open or closed on its own: This is called “gate drift.” It means your post is no longer level. A gate should stay exactly where you leave it. If it moves, the post needs to be reset or reinforced.
• Cracks in the concrete footing: Walk out to your gate post and look at the base. If the concrete is cracked or separated from the surrounding soil, the post is not being held securely.
• Squeaking or grinding sounds: While this can sometimes be a lubrication issue, it often signals that the hinge bearings have failed and are grinding metal on metal.

If you see these issues, do not wait. A sagging gate puts unnecessary strain on your gate motor, such as a Ghost Controls or DoorKing system. If the motor has to fight the weight of a sagging gate, you are looking at a much more expensive repair bill down the road.

Our Hinge & Post Repair Process

I don’t believe in hauling your gate off to a shop if I can fix it in your driveway. My truck is equipped with mobile welding gear, and I prefer to do the work right where the gate lives. Here is how we handle a typical hinge and post repair.

1. Structural Assessment: I start by checking the plumb of the post and the integrity of the hinges. I use a level to see exactly how much the post has shifted. If the post is solid but the hinge is broken, we focus on the hinge. If the post is moving, we have to address the footing.
2. On-Site Welding: If your hinges are broken or the mounting plate has pulled away from the post, I weld it back properly. I don’t use bolts for load-bearing hinge repairs because bolts eventually loosen. A good weld is permanent.
3. Post Reinforcement: If the post is leaning, we often have to dig out the base to reset it or add steel reinforcement to lock it into place. We use high-strength concrete mixes that are designed to handle the shifting clay soil common in North Richland Hills.
4. Alignment and Calibration: Once the welding and reinforcement are complete, we realign the gate. It should swing freely with one finger.
5. Testing and Verification: We cycle the gate multiple times. We check the latch alignment, the swing radius, and the motor load. We don’t leave until the gate operates exactly as it did the day it was installed.

Every single job is backed by our 90-Day Done Right Promise. If it is not right, I come back and make it right. No runaround, no excuses.

Hinge & Post Repair Pricing in North Richland Hills

I believe in upfront pricing. You won’t get a “starting at” price on the phone and a different bill at your door. We provide a clear estimate before we touch a single tool. We also offer a permanent 10% discount for seniors and veterans, and we take $40 off any repair over $200. We do not charge a trip fee if you are in the county.

The final cost depends on the weight of the gate and whether we have to break up existing concrete to reset the post. We are happy to provide a free second opinion if you have another estimate that seems too high or confusing. Call (817) 241-4067 to speak with us directly about your specific gate.

FAQs - Hinge & Post Repair

Is it cheaper to repair the hinge or replace the post?

It is almost always cheaper to repair the hinge or reinforce the post than to replace the entire assembly. We only recommend full replacement if the post is rotted through or if the metal has suffered severe structural fatigue that makes welding unsafe. If you are unsure, call us, and we will give you an honest assessment of whether a repair will hold.

Can you fix a gate that drags on the driveway today?

We do our best to accommodate same-day or next-day service calls because we know a broken gate is a security risk. If your gate is dragging, it is putting a heavy load on your operator, and that can lead to Automatic Gate Repair needs or motor failure. Call (817) 241-4067 and we will check our schedule to see when we can get out to your home in North Richland Hills.

Do I need to be home for the repair?

For most gate repairs, you do not need to be home as long as we have access to the gate and the power supply. However, I prefer if you are there for the final walkthrough. I like to show you the work I did and make sure you are happy with how the gate swings before I pack up my tools. We are a locally owned business, and I treat your property like I would treat my own.

Are high-tension gate springs dangerous?

Yes, gate springs and high-tension cables can be extremely dangerous if handled incorrectly. They store a massive amount of energy, and if a spring snaps or a cable slips while you are working on it, it can cause serious injury. I strongly recommend that you leave any work involving springs, cables, or internal gate motor components to a trained professional. When you hire Gatewood Fence & Gate, you are paying for the experience and the safety equipment to do the job without risk.

If you have a gate that is leaning, dragging, or just not acting right, don’t ignore it. A small fix today saves you from a major repair tomorrow. We have been serving North Richland Hills for over 29 years, and we have seen every type of gate failure imaginable. We don’t use call centers, and we don’t use scripts. We just fix gates. Call (817) 241-4067 today for a free estimate or to ask us a question about your gate.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Richland Hills since 2001.