Linear Gate Parts & Welding Nationwide | Gatewood Fence & Gate

Linear Gate Parts & Welding in North Richland Hills: What to Know First

We provide independent Linear gate parts and welding in North Richland Hills, with most repairs completed in a single visit because we weld on site instead of hauling your gate off to some shop across town. Since 2001, Hal Gatewood and his crew have fixed every Linear model that shows up on North Richland Hills driveways, and we tell you the real price before the first cut is made, not after. If you own a Linear opener or Linear gate hardware and something has failed, call (817) 241-4067 and a live person answers, 24/7.

Call (817) 241-4067

How Linear Products Fail - and How We Fix Them

• Linear actuator arm bushings wear egg-shaped on the LA400 and LA500 series. In North Richland Hills, our summer heat bakes the grease out of the pivot points, then the arm starts to oscillate under load. The gate still opens, but it shudders and groans, and eventually the bolt holes on the mounting bracket wallow out. We replace the bushing and re-weld or sleeve the bracket rather than selling you a whole new arm. Most shops won’t bother; the arm runs $300 plus, so they’d rather swap it. We’d rather fix it for about a third of that.
• The hinge-side post is where Linear swing gates actually die, not the opener. Linear’s electronic components are generally solid. The problem we see weekly is the post: North Richland Hills clay soil swells with spring rain and shrinks in August, and that movement leans the post until the gate drags at the latch. You’ll notice the gate getting harder to cycle, the opener tripping its force limit, and then a bending hinge plate. We dug out and re-set a post in the Fossil Creek area recently where the previous installer had sunk it two feet with no concrete collar. That’s not a Linear problem, it’s an installation problem, but it kills Linear openers all the same. We weld the hinge plates back square, level the post, and the opener stops fighting itself.
• Linear LRA and M model gearboxes strip when the gate binds even slightly. The plastic internal gear in those units is a sacrificial part, and once resistance from a sagging gate or a rusted roller exceeds what it can handle, the gear teeth shear. You’ll hear the motor whir but the gate won’t move. Before we replace any gear, we find the bind, because putting a new gear in a gate that still drags just trades one stripped gear for another in a year. That’s the difference between a parts-swapper and a repair.
• Weld failures on the gate frame itself, especially at the lower mid-rail joint on double swing gates. North Richland Hills freeze-thaw cycles over winter put stress exactly where a factory or previous shop left a cold lap weld. Those joints crack, the gate sags at the latch side, and then the Linear opener’s auto-close feature can’t fully close it because the latch no longer lines up. We grind out the old weld, re-weld with proper penetration and a gusset if the design calls for it, and then adjust the Linear limit settings so the cycle is clean again. A gate that sags in the hinge post, not the middle, is where we start.
• Linear wireless keypad and photo eye mounting hardware on older installations corrodes and seizes. The electronics inside are usually fine; the problem is the cheap zinc-plated screws and brackets Linear originally shipped that don’t hold up to North Richland Hills humidity and our alkaline soil splash. We replace the mounting hardware with stainless, reposition the photo eye so it’s not getting fouled by grass or irrigation overspray, and often the existing Linear component works for years more. You don’t need a new opener because a $4 bracket rusted through.

Our Linear Gate Parts & Welding Process

1. 1
   You call (817) 241-4067. A live person answers. Hal or his crew asks what the gate is doing, what model opener you have if you know it, and whether it’s swing or slide. We set a time and show up when we said we would.
2. 2
   We diagnose with the gate still on its hinges. Before we touch anything, we run the Linear unit through a full cycle and watch where it struggles. That tells us whether the problem is electrical, mechanical, or structural. More than half the time, the real cause is something the last tech missed.
3. 3
   We show you the failing part and the price to fix it. No mystery invoices. We tell you what’s actually broken, what a factory Linear part costs if that’s the right call, or where a quality aftermarket part does the same job for less money and won’t void your warranty. You approve the number before we weld or replace anything.
4. 4
   We repair or weld on site. Hinge replacement, post re-set, rail repair, latch work, custom brackets, gate rollers, all done in your driveway with a welder running off our truck. Your gate never leaves the property.
5. 5
   We test the full cycle and adjust the Linear opener. Force limits, travel, auto-close timing, photo eye alignment. If the gate opens and closes three times smooth with no fault light, we call it done.
6. 6
   You get the 90-Day Done Right Promise in writing. If anything we touched isn’t right within 90 days, one call brings Hal back. No runaround, no “up to” language, no fine print.

What Linear Gate Parts & Welding Costs in North Richland Hills

Here’s what we charge for the Linear work we do most in North Richland Hills, with the caveat that your exact number depends on your gate’s condition and the parts involved. You’ll know the real price before we start, and if you have a written estimate from anyone else, bring it in and we’ll give you a free second opinion.

What moves the price is mostly the condition of your existing metal. Thin-gauge tubing or steel that has already been welded poorly takes more time to make right. And we also offer $40 off any repair over $200, plus a permanent 10% discount for seniors and veterans. Call (817) 241-4067 for a straight number.

Why North Richland Hills Homeowners Call Gatewood Fence & Gate for Linear Work

We’ve been at this since 2001, and the name on the shop is Hal Gatewood’s. That means the guy who writes the quote is the guy who stands behind it. Most of our North Richland Hills regulars know Hal from the Smithfield Road corridor where he grew up and still lives, and he picked up the trade at Tarrant County College’s northeast campus through their welding and fabrication program. When a Linear gate misbehaves, we fix the root problem, not the symptom. And because we service eight other brands too - LiftMaster, Mighty Mule, Ghost Controls, DoorKing, plus FAAC, BFT, Viking, and Elite - we’ll never talk a Linear owner into replacing a whole line because we only carry one brand’s parts. Every job carries the 90-Day Done Right Promise in writing. Free second opinion on any written estimate. $40 off any repair over $200. If I hand you my number, use it - that’s what it’s there for.

FAQs

Can you get genuine Linear replacement parts in North Richland Hills? Yes. As an independent Linear service provider, we source factory Linear parts through authorized distributors when warranty or compatibility calls for it, and we carry a curated stock of OEM-equivalent aftermarket parts for common wear items like bushings, gears, and photo eyes that cost less and perform the same. Call (817) 241-4067 with your model number and we’ll tell you the honest tradeoff.

Does welding on my Linear gate void the manufacturer warranty? Welding on the gate frame or hinge hardware does not void a Linear opener warranty, because the opener is a separate component from the gate structure. We never modify the internal electronics or motor assembly themselves. If a Linear opener is still under manufacturer warranty, we handle the structural work and leave the covered components intact so the warranty stays valid.

How fast can you fix a Linear gate in North Richland Hills? Most Linear gate parts and welding repairs are done same day, because we carry the common parts on the truck and weld right in your driveway. If your specific part isn’t in stock, it’s typically here within two to five business days, and we’ll tell you that before you schedule. Calls are answered by a live person 24 hours a day, 7 days a week.

Is it cheaper to replace my Linear gate than repair it? Rarely. A new steel gate with installation runs $1,500 to $4,000 or more in North Richland Hills, and most of what we repair costs under $400. A cracked weld, a leaning post, a worn roller - those are all fixable for a fraction of replacing the gate. We’ll always tell you if a gate is truly beyond saving, but in 29 years of doing this, the number of gates we couldn’t repair counts on one hand.

Contact Gatewood Fence & Gate for Linear Gate Parts & Welding in North Richland Hills

If your Linear gate is sagging, dragging, stuck open, or making a sound it shouldn’t, call (817) 241-4067. A live person answers, day or night. We’ll schedule a time, show up when we said, tell you the price before any work starts, and stand behind the fix with the 90-Day Done Right Promise. You can also drive to the shop and look Hal in the eye - the address is published, and the name on the sign matches the name on the invoice.

Written by Hal Gatewood, Owner, Gatewood Fence & Gate at Gatewood Fence & Gate, serving North Richland Hills and nearby areas.