Driveway Gate in North Richland Hills, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Driveway Gate Repair and Installation in North Richland Hills, TX

If your driveway gate in North Richland Hills is dragging on the concrete, refusing to open for your remote, or making a grinding noise that echoes down the street, we can help. Most driveway gate issues in this area stem from hinge fatigue, motor limit failures, or simple alignment problems caused by the shifting clay soil we see around Tarrant County. We offer same-day or next-day service to get your property secured again, and because we handle the welding on-site, we rarely have to haul your gate away. If you need professional help, call us at (817) 241-4067 for an estimate. We don’t believe in high-pressure sales; we believe in fixing what is broken and leaving your driveway in better shape than we found it. For larger projects, you can also look at our full Gate Installation in North Richland Hills services.

When You Need Driveway Gate Service

You don’t need a professional to tell you when a gate is failing, but you do need one to tell you why. After 29 years of doing this, I’ve learned that a gate rarely just “stops working.” It gives you warnings long before it fails completely. Here are the signs I see most often in North Richland Hills:

• The gate drags on the driveway: This is almost always a hinge issue or a post that has shifted. If you keep forcing it, you’ll burn out your motor. We need to reset the post or re-weld the hinges before that happens.
• Intermittent opening or closing: If your gate stops halfway or reverses for no reason, your safety sensors might be blocked by local debris, or the logic board in your opener is struggling. I see this a lot with older Ghost Controls units that have been exposed to our harsh Texas heat.
• Grinding or screeching noises: Metal-on-metal noise means your bearings are shot or your chain is dry. This is a maintenance issue that, if ignored, will eventually snap the chain or strip the gears inside your Elite or DoorKing opener.
• The gate won’t lock or latch: If the wind blows your gate open, your latch assembly is likely misaligned. We can adjust the strike plate or, if necessary, weld a new catch on-site.
• Remote control range is shrinking: If you have to drive right up to the gate to get it to open, your antenna might be damaged, or the receiver board is failing. It’s a frustrating way to start your commute, but it is usually a quick fix.
• Visible rust or structural cracks: Since we handle on-site welding, we can patch structural cracks in steel gates without you needing to buy a whole new system.

Our Driveway Gate Process

When you call Gatewood Fence & Gate, you aren’t getting a dispatch center. You are getting a team that understands how gates actually work. We don’t believe in “replace everything” tactics; we believe in fixing the root cause. Here is how we handle your driveway gate:

1. The Initial Assessment: We come to your property and look at the gate in motion. We watch where it sags, where it binds, and how the motor handles the load. I’ll tell you exactly what is failing and why.
2. Upfront Pricing: Before we turn a wrench, you will have a written price. We don’t do hidden fees, and we don’t change the price once we start. If it’s a repair, we tell you if it’s worth fixing or if you’re throwing good money after bad.
3. On-Site Repairs: Most of our work happens right in your driveway. If a hinge needs to be re-welded or a brace needs to be added, we do it there. We carry the tools to cut, grind, and weld so your gate doesn’t have to leave your property.
4. Motor and Electronic Tuning: Once the steel is straight, we calibrate the motor. We set the limit switches, test the safety sensors to make sure they stop for obstructions, and ensure your remotes are synced properly.
5. The 90-Day Done Right Promise: Every job we finish is backed by our promise. If it breaks again for the same reason within 90 days, we come back and fix it. It is that simple.

Driveway Gate Pricing in North Richland Hills

We believe in pricing that makes sense. You shouldn’t have to guess what a repair will cost, and you shouldn’t be charged a trip fee just for us to drive across town. We offer a permanent 10% discount for seniors and veterans, and we take $40 off any repair over $200.

Pricing for driveway gates depends on the complexity of the issue. A simple alignment or sensor cleaning is much different than replacing a gear assembly or welding a new post.

*Note: These are estimates. We provide a firm quote after we see the gate. We also provide a free second opinion if you have another written estimate you aren’t sure about. Call (817) 241-4067 to get your exact numbers.*

FAQs - Driveway Gate

How much does it cost to fix a sagging driveway gate?

Most sagging gate repairs in North Richland Hills cost between $150 and $350, depending on whether we need to re-weld the hinges or adjust the post depth. A sag is usually a sign of structural stress, so we address the hinge point first to ensure the gate swings level again; call (817) 241-4067 for an exact quote.

Can you repair my gate motor if it’s an older brand?

Yes, we service nine major brands including Mighty Mule, DoorKing, and Elite, and we can often repair motors that other companies tell you to replace. If the parts are no longer manufactured, we will be honest with you about your options for an upgrade rather than trying to patch something that will fail again in a month.

Is it cheaper to repair or replace my driveway gate?

It is almost always cheaper to repair a gate if the frame is sound, and we are one of the few shops that will tell you if a repair is not the right choice. If the rust is eating through the structural members or the motor has internal gear failure that costs more than a new unit, we will recommend replacement, but we never push for a new sale unless you actually need it.

Do you charge a trip fee to come out to North Richland Hills?

We do not charge a trip fee for service calls within the county. We are locally owned and owner-operated, and we think charging you just to show up is bad business, so we keep our estimates free and our service calls straightforward.

Safety and Expertise

When you are dealing with driveway gates, you are dealing with heavy steel and powerful motors. A gate that weighs hundreds of pounds can cause serious injury if the safety sensors fail or if the chain snaps while you are moving it. Never try to adjust the tension on a gate spring or force a motor open if it is stuck. These systems are under significant tension, and they require a professional eye to diagnose without creating a new hazard. We take safety seriously, and we recommend that if your gate is acting erratic, you keep children and pets away from the moving parts until we can get there to secure the area.

Our shop has been open since 2001, and I have personally been working on these systems for over 29 years. I don’t believe in “quick fixes” that compromise your family’s safety. When we leave your property, the gate will be safe, the sensors will be active, and the operation will be smooth. If you have questions about your specific brand or the age of your system, give us a call at (817) 241-4067. I answer the phone personally, and we can get you on the schedule.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Richland Hills.