Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Colleyville
Gate access control in Colleyville comes down to one hard truth: the electronics are usually the easy part. The hard part is the black clay under your gate. We have been fixing gates in this part of Tarrant County since 2001, and we can tell you from thousands of service calls that Colleyville’s expansive soils move more than any operator board ever will. When your keypad reads the code but the gate won’t budge, the problem is rarely the keypad. Call (817) 241-4067 and we will send someone who actually knows the difference.
We are owner-operated, which means Hal Gatewood’s name is on the invoice and on the shop. No voicemail, no call center three states away. A live person answers around the clock.
Why Gatewood Fence & Gate Is Colleyville’s Preferred Gate Access Control Company
Colleyville homeowners call us because we have been doing this long enough to recognize the failure before we pull a tool out of the truck. A gate access control failure on an estate lot near Montclair Parc or along Cheek-Sparger Road is very often a structural problem wearing an electronic costume. The keypad works. The remote works. The receiver works. The gate simply cannot move because the post footing heaved in the clay and now the gate drags on the driveway like a plow. National outfits replace the operator and leave. Six months later it burns out again. We fix the post first, then the electronics. That is why our customers in Colleyville keep our number.
Every job we do in Colleyville carries the 90-Day Done Right Promise in writing. If it is not done right, we come back. No runaround, no fine print. We also do on-site welding, which matters here more than in most cities because so many Colleyville gates are custom-fabricated ornamental iron or tubular steel that cannot be swapped for an off-the-shelf panel.
Our Gate Access Control Services in Colleyville
When Colleyville homeowners talk about Gate Access Control, they usually mean one of a few things, and we handle all of them. The most common jobs we do in the area involve keypads, remotes, phone entry, and card readers. Here is what that actually looks like on a Colleyville driveway.
Keypad Entry
A keypad entry system on a Colleyville estate gate gives you, your kids, and your pool guy a code instead of a remote. We install wired and wireless keypads and we service the ones already mounted on the brick columns that are so common on Colleyville properties. If your keypad reads the code but the gate does not move, do not assume the keypad is dead. Around here, it is often the post footing that has shifted and overloaded the operator. We will diagnose it properly before quoting you anything.
Remote Control
We program and replace remotes for the operators most common in Colleyville, including Linear, Viking, and DoorKing. If your remote works only when you are standing three feet from the receiver, that is usually an antenna or interference issue we can track down on-site. We keep common remotes on the truck, so the fix is often done in one visit.
Phone Entry
Phone entry systems let you buzz the gate open from your cell phone, and they are popular on Colleyville’s larger properties because they work without a dedicated remote. We install cellular-based entry units that do not require a landline, which is worth knowing if you have an older hardwired phone system from the 1990s that the phone company no longer supports.
Card Reader
Card readers make sense for Colleyville homeowners with frequent service providers, ranch staff, or extended family coming and going. We install proximity card readers and integrate them with existing operators. If you have a community gate or a shared driveway, we can also wire a card reader into an access log so you can see who opened the gate and when.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Colleyville
Hal and his crew are certified to service nine major gate automation brands, and in Colleyville we most often see Linear, Viking, DoorKing, and Ghost Controls on estate gates. We keep common boards, remotes, and safety edge parts in our local stock so Colleyville customers are not waiting two weeks on a distributor back east. If we do not have a part for your specific operator, we can usually source it within a day or two and we will tell you that up front, before any work begins.
Common Gate Access Control Problems We See in Colleyville Homes
Colleyville gives us a particular pattern of gate access control failures. The estates are newer, the operators are often builder-grade, and the gates are heavy. Those three things do not play well together when the soil starts moving. Here is what we see most:
- Operator burn-out from post shift. On newer Colleyville estates, the builder often installed a mid-grade operator sized for a standard gate. Then the black clay shifted the hinge post, the gate started dragging, and the motor has been fighting gravity ever since. The operator dies young. The fix is releveling the post first, then replacing the motor.
- Manual gates with no conduit. A lot of Colleyville homes built in the 1990s and 2000s got a beautiful custom iron gate installed manually, with no conduit run for wiring. Adding a keypad or intercom later means surface-mounting or trenching through clay. We do both, and we know which approach is right for each driveway.
- Ice storm damage. The February 2021 ice event and lesser freeze cycles since then have corroded gate automation boards and frozen lubricants in hinges and track rollers across Colleyville. A remote that worked fine in October may be intermittent in January because the board has moisture damage from a freeze-thaw cycle.
- Loop detector misreads. Clay soil heave can lift the driveway surface enough to disturb the induction loop wires buried under the concrete. When the loop thinks a car is sitting on it, or fails to see one, the gate will not close or open properly. We re-terminate and re-seat loop wires regularly on Colleyville callouts.
Pricing for Gate Access Control in Colleyville, TX
You deserve real numbers before you decide anything. A keypad entry installation on a Colleyville gate typically runs $350-$650 depending on whether we can surface-mount the keypad or need to trench conduit. Remote control programming and replacement is the least expensive job we do, usually $95-$180 including the remote. Phone entry systems with cellular units run $700-$1,200 installed. Card reader installations start around $450 and go up from there if you want multiple readers or a full access log.
The price we quote is the price you pay. We agree on the number before any work starts, and we do not surprise you at the door. Estimates are free inside the county, and we offer $40 off any repair over $200, plus a permanent 10% discount for seniors and veterans. Call (817) 241-4067 and we will give you a straight number.
We Also Serve Cities Near Colleyville
While this page is for Colleyville, our trucks run routes through Bedford, Euless, Southlake, and Hurst most days of the week. If you are in one of those cities and need gate access work, you will get the same owner-operated service and the same 90-Day Done Right Promise. Our Gate Access Control in Colleyville customers often refer neighbors in Bedford and Southlake, and we are glad to help.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Colleyville
Because nobody fixed the post. In Colleyville, the expansive black clay under your driveway shifts with the seasons, and when a hinge post gets shoved out of plumb, the gate starts dragging and the operator burns out. A new motor fixes the symptom for a few months, but the soil is still moving. You need the post re-set and the gate releveled before the new operator goes in, which is exactly how we sequence the job. Call (817) 241-4067 and we will diagnose the real cause instead of selling you another motor.
Yes. Most Colleyville gates built in the 1990s and 2000s went in as manual gates with no wiring conduit. We can surface-mount wiring in conduit, or trench through the clay if you want a cleaner look. We have done this on estates off Pool Road, through the neighborhoods around Montclair Parc, and all over the Cheek-Sparger corridor. The keypad gets tied into a new or existing operator, and we size the operator for your gate’s actual weight and the soil it sits in.
Automatic gates in Colleyville must meet UL 325 safety standards, which means they need a primary entrapment protection device (like a monitored safety edge or contact sensor) and a secondary device such as a photo eye or non-contact sensor. Gates that can trap a vehicle against a fixed object usually need both. We install and test the full safety system on every access control job, and we will tell you plainly if your existing gate does not meet current code before we automate it.
The same clay heave that moves your gate posts can lift and crack the driveway slab where your induction loop wires are buried. When that happens, the loop detector misreads and the gate refuses to close, or opens for a car that is not there. We re-seat and re-terminate loop wires on Colleyville jobs constantly, and we are not surprised by it because we know what the soil does in a dry summer followed by a wet spring.
Freeze-thaw cycles corrode the receiver board connections and can cause the remote to work only some of the time. That is the most common pattern we see in Colleyville after ice events like February 2021. The fix is usually re-terminating the corroded connections or replacing the receiver board, which we can do same-visit if the part is on the truck. Call (817) 241-4067 for an exact quote, and the estimate is free.
On a custom estate off Pool Road, our tech ran into a gate access control failure that looked simple from the outside. The keypad read the code, the remote worked, but the swing gate operator would not open. The real culprit was not the LiftMaster board. It was the hinge post footing that had heaved in the clay, throwing the gate off plumb enough to overload the motor. We re-set the post, releveled the gate, and only then replaced the operator. The new unit will not burn out in six months like the last one did, because we fixed the thing that killed the last one.
That is the difference in Colleyville. The name is on the shop. The shop is down the road. And when you call, you get someone who has seen this exact failure before and knows where to start.
Call (817) 241-4067 for a free estimate on any gate access control work in Colleyville. We answer live, day or night, and the price we quote is the price you pay.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Colleyville since 2001.