Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Hurst
Gate motor and opener work in Hurst comes down to one thing most national companies miss: the post the operator bolts to is sitting in Tarrant County black clay, and that clay moves. We’re Gatewood Fence & Gate, and we’ve been called to hundreds of Hurst homes where the opener wasn’t actually dead. The footing had shifted, the gate dragged, and the motor burned itself out fighting the geometry. If your gate opener is grinding, stopping mid-cycle, or reversing for no reason, call (817) 241-4067 and we’ll tell you straight what’s going on.
We’re the Gate Motor & Opener team that starts at the foundation, not the circuit board. Hurst’s housing stock was built between 1955 and 1980, and the clay soil beneath those ranch-style lots heaves posts several inches every season. A motor installed on a drifting post tears itself apart within a year. We fix the post first, then the opener. That’s why our work holds up here when other repairs don’t.
A live person answers our phone 24/7. That’s Hal’s rule, and it’s non-negotiable. You won’t get a voicemail or an offshore call queue. You’ll get a real person who knows Hurst, knows gate openers, and can have someone at your door fast.
Why Gatewood Fence & Gate Is Hurst’s Preferred Gate Motor & Opener Company
Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is. He’s been owner-operating since 2001, and when you call about an opener problem in Hurst, either Hal shows up or one of his background-checked crew members does. No subcontractors, no third parties, no mystery technicians.
Every job we do in Hurst carries the 90-Day Done Right Promise in writing. If something’s not right after we leave, one phone call brings us back. Not “up to 90 days” or “in most cases.” Ninety days, plain and simple, stamped on your invoice.
We serve Hurst directly from our Dallas-Fort Worth metro office, which means scheduling is fast and parts arrive quickly. Our crew knows the neighborhoods around Pipeline Road, Precinct Line Road, and the older streets near Bellaire Drive without needing GPS. When you describe a gate problem over the phone, we already know what the soil and the house age are doing to it.
We also answer with a live person around the clock. When an opener fails on a Sunday evening and your driveway gate is stuck open, you call and a human picks up. That matters more than most people think until the third time they press “1” for a menu they didn’t want.
Our Gate Motor & Opener Services in Hurst
Motor Repair
Most opener failures in Hurst are not motor failures. They’re post failures, rail misalignment failures, or limit-switch failures caused by the gate binding. We diagnose the actual cause before touching the motor. If the motor is genuinely dead, we replace it. But if a warped wood gate panel is dragging and tripping the opener’s limits every cycle, fixing the motor without fixing the gate means you’ll be calling us again before Christmas.
In neighborhoods off Mid-Cities Boulevard and Brown Trail, we routinely find the latch-side post has drifted inward two or three inches as its 1970s concrete footing tilted in the clay. The opener strains against that drag every single cycle. We reset the post, true the gate, and then set the limits properly. That’s a repair that lasts.
Motor Installation
A new gate opener in Hurst should be sized for the gate you actually have, not the gate the sales rep on the phone imagines. We measure the gate’s weight, the post condition, the hinge wear, and the power situation before recommending anything. If your wood swing gate has warped over decades of 100-degree heat cycles, we tell you what that means before you spend money on a motor that will fight a crooked frame.
For ranchette properties still holding acreage along the eastern edge of Hurst, a wide farm gate needs a slide motor with rack and pinion, not a residential swing arm. We install both, but we won’t sell you the wrong one. Hal has been at this since 2001 and he’d rather lose a sale than sell a motor that cooks itself in six months.
Linear Motors
Linear actuators are the most common drive type on residential swing gates in Hurst, and we service them all. A Linear brand operator on a well-set post with a properly hung gate runs quietly for years. The moment water seeps into the actuator housing or the gate geometry goes out of square, the arm starts pushing at an angle it wasn’t designed for.
We stock Linear parts locally, which means quicker turnaround for Hurst customers than waiting on a two-week backorder from a warehouse in another state. If your Linear motor is clicking but not moving, call us before you order a replacement online. We’ll tell you if the unit is actually shot or if the gate is just binding against a heaving post.
Slide Motor
Slide gate openers in Hurst face a specific enemy: the rack and pinion fighting a gate that’s dragging because the rail has settled or heaved. On a ranch-style home near Pipeline Road, we found the slide gate operator grinding as the gate dragged across a latch-side post that had tilted inward three inches in the clay. We reset the concrete footing, mounted a fresh LiftMaster LA400 on a level rail, and added a solar gate opener kit with battery backup. The owner’s horses no longer spook at the rack and pinion struggling to move.
If your slide gate bounces, hesitates, or sounds like it’s chewing gravel, the motor might be fine and the rail might be the problem. We check both before quoting anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hurst
We’re certified to work on Linear, Viking, Ghost Controls, and DoorKing operators, along with LiftMaster, FAAC, BFT, Elite, and Mighty Mule. For Hurst customers, that means we usually have common replacement parts on hand or can get them same-week through our local supply lines. You’re not waiting on a backorder while your gate sits open.
When a Ghost Controls unit keeps losing its limits after storms, that’s often a wiring or grounding issue from the clay soil’s moisture swings, not a bad board. When a Viking slide operator trips its entrapment sensor every morning, that’s usually a photo-eye out of alignment because a post moved. Knowing the brand helps, but knowing how Hurst’s soil moves is what saves you a second service call.
Common Gate Motor & Opener Problems We See in Hurst Homes
- Motor strain from warped wood gates. Decades of North Texas summers above 100 degrees twist cedar and pine gate frames at the bottom rail. The gate binds against the latch post, and the opener’s current draw spikes every cycle until the thermal overload finally trips. We true the gate or re-hang the hinges before condemning the motor.
- Post footing heave throwing geometry out of square. Hurst’s black clay expands in spring rains and contracts during drought. Posts move several inches per season, and the opener’s safety photocell gets misaligned. The gate reverses every cycle, and the homeowner assumes the motor is defective. Usually it’s a two-inch post shift, not an electronics failure.
- Undersized residential operators on wide farm gates. The few acreage lots still left in Hurst often have heavy pipe-frame farm gates hanging on long driveways. A residential swing opener rated for 400 pounds burns out trying to move 700. A slide motor with rack and pinion is the right call, and we’ll tell you that before you buy anything.
- Solar kit wiring gone wrong. On properties without grid power at the gate, a solar operator is the only real option. But undersized panels, shallow battery boxes, and unsealed wire nuts fail within a season in Hurst’s heat. We install proper deep-cycle batteries and seal every connection for the long haul.
Pricing for Gate Motor & Opener in Hurst, TX
Here’s what Hurst homeowners can expect to pay. A residential swing-arm opener replacement typically runs $850 to $1,900 installed, depending on gate weight and post condition. A slide gate operator with rack and pinion on a wider driveway runs $1,400 to $3,200. Motor repair, when the motor itself is salvageable and the issue is the gate or post, runs $180 to $480. Solar gate opener kits with battery backup typically add $400 to $900 to the base install.
Every price is quoted and agreed before any work starts. That’s not a nice-to-have. That’s the rule. We also run standing offers for Hurst customers: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
Call (817) 241-4067 and we’ll give you a straight number, not a range that grows at the door.
We Also Serve Cities Near Hurst
If you’re in North Richland Hills, Bedford, Colleyville, or Euless, we handle gate motor and opener work there too. The soil conditions change a bit as you move east into sandier ground, but the same repair-first approach applies. Call us and we’ll come take a look, wherever you are around Hurst.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Hurst
Because the clay soil under your posts swells and contracts with the boom-and-bust rain cycles, and by July the gate frame has moved enough that the wheels no longer sit square on the rail. The opener keeps pushing, the gate walks off the track, and the motor fights a load it was never designed for. The fix starts with resetting the post and leveling the rail, not with a new motor. Call (817) 241-4067 and we’ll check the footing before we quote a single part.
Yes, and it’s often the best option for acreage lots where running conduit from the house would cost more than the opener itself. We install solar gate opener kits with deep-cycle batteries and properly sized panels so the gate works through cloudy stretches and overnight use. The key is sizing the panel and battery to the gate’s weight and cycle count, and sealing every connection against Hurst’s heat and humidity. We’ll spec it free.
Almost never. The motor is tripping the sensor because the gate is heavy and out of square, typically from a hinge-side stile that’s rotted where wood contacts concrete, or a post that’s heaving in the clay. The entrapment sensor is doing its job. We re-hang the gate, repair or replace the rotted section, and the opener usually works fine again. That’s a repair call, not a replacement.
UL 325 requires entrapment protection on every automatic gate, including photo-eyes that reverse the gate when the beam is broken. In Hurst, post heaving throws those photo-eyes out of alignment routinely. A gate that reverses every cycle or refuses to close is often a misaligned photo-eye from a two-inch post shift, not a failed sensor. We align the beam, check the post, and make sure the system complies before we leave. That’s a safety item, and we treat it like one.
If you want the gate to open automatically for vehicles exiting the property, yes. A loop detector under the driveway senses the car and triggers the opener without you pressing anything. On long Hurst driveways, we typically install the loop about 20 feet inside the gate so exiting cars don’t trip it while waiting on traffic. It’s not mandatory, but most owners with slide gates add one for the convenience. Ask us about it when you call (817) 241-4067.
Call Gatewood Fence & Gate for Gate Motor & Opener in Hurst
When your gate opener quits, you don’t need a menu of options. You need a person who answers the phone, tells you what’s wrong, and quotes a price that won’t change when the truck arrives. That’s what we do. Hal Gatewood’s name is on the invoice, the 90-Day Done Right Promise is in writing, and the phone rings to a live human, day or night.
Call (817) 241-4067 for a free estimate on gate motor and opener work in Hurst. We’ll show up when we say, look at the post before the motor, and fix the foundation first so you’re not calling us again next summer.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hurst and the surrounding area since 2001.