Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in North Richland Hills?
Most gate repairs in North Richland Hills range from $150 to $450 for standard hardware adjustments, sensor realignments, or minor welding work, while full motor replacements or complex structural repairs can run between $600 and $1,400. Because we handle everything from sagging hinges in the older neighborhoods of North Richland Hills to modern access control issues in newer subdivisions, we provide upfront pricing before a single tool comes out of the truck. If you are dealing with a gate that won’t open, sounds like it’s grinding, or is dragging on the concrete, give us a call at (817) 241-4067 for an honest assessment.
Gate Repair Cost Breakdown (2026)
When you call around, you might get a “trip charge” or an hourly rate that feels like a blank check. That isn’t how we operate at Gatewood Fence & Gate. Since 2001, we have believed in fixing the problem, not billing for the clock. Below are the typical ranges for common gate repairs we see across North Richland Hills, along with our 2026 gate repair cost guide for Fort Worth, TX. Keep in mind that these prices reflect standard labor and common parts for brands like LiftMaster, FAAC, and Ghost Controls.
| Service Type | Estimated Cost Range |
|---|---|
| Minor Hinge Adjustment & Welding | $150 - $250 |
| Sensor/Photo-Eye Realignment | $160 - $280 |
| Gate Opener Control Board Repair | $300 - $650 |
| Chain or Belt Drive Repair | $250 - $450 |
| Full Gate Motor Replacement | $700 - $1,400+ |
| Structural Post/Mounting Repair | $350 - $750 |
The biggest factor driving these costs is whether the gate needs to be removed or if we can handle the welding right there in your driveway. A gate that drags on your driveway usually indicates the hinge post has shifted, which is common in the North Texas clay soil. If we can weld a gusset or adjust the tension on-site, you save money. If the post itself has rotted out or shifted significantly, the repair becomes more involved. We always look for the most durable fix first because, as I have learned since 2001, fixing a hinge without addressing the post just means I will be back in six months to do it again. I would rather do it right the first time.
What Affects Gate Repair Pricing in North Richland Hills
Not every gate issue is the same, and the geography of North Richland Hills plays a bigger part than you might think. Here are the primary factors that influence your final bill:
- Soil Movement and Foundation: The clay-heavy soil in Tarrant County shifts with our hot, dry summers and wet springs. If your gate is dragging, it is rarely just the gate-it is the post. Repairing the post foundation adds cost but prevents the gate from destroying your concrete drive.
- Gate Material: Wrought iron gates require specialized welding that we perform on-site. Aluminum or vinyl gates often require specific proprietary hardware or fasteners that cost more than standard steel bolts.
- Brand and Compatibility: We service nine major brands, including Viking, DoorKing, and BFT. If your system is older, finding compatible control boards can be a challenge, but we have the connections to source parts others say are “obsolete.”
- Access Control Complexity: If your gate uses keypad entry, remote transmitters, or loop detectors, troubleshooting the electrical side is different from physical repair. Electrical shorts caused by North Texas storms can be tricky to trace, which adds time to the diagnostic phase.
- Safety Compliance: If your gate is missing modern safety sensors, we cannot simply repair the old motor. Per code, we must ensure the gate is safe to operate. Installing these safety features is a non-negotiable part of our job, ensuring you and your family are protected.
When you choose Gatewood Fence & Gate, you get the 90-Day Done Right Promise in writing. If we fix it and it isn’t right, you call (817) 241-4067, and I come back. No excuses, no runaround. We also offer a permanent 10% discount for seniors and veterans because we respect the people who have built this community.
How to Save on Gate Repair
The best way to save money on gate repair in North Richland Hills is to catch the problem before it snaps a hinge or burns out a motor. If you hear a grinding noise or notice the gate is starting to drag or swing unevenly, call us immediately. A small adjustment today is a $150 fix; a collapsed gate tomorrow is a much larger headache.
We also keep our pricing transparent by offering a free second opinion on any written estimate you have already received. If a national outfit told you that you need a brand-new gate, call us first. I have lost count of how many times I have saved a homeowner thousands of dollars by simply welding a hinge or replacing a sensor that someone else labeled “impossible to fix.”
Remember, we do not charge a trip fee if you are inside the county searching for gate repair near me in North Richland Hills, TX. We also take $40 off any repair over $200. It is a simple way to keep our neighbors’ gates working without breaking the bank.
FAQs - Gate Repair Cost
How much does it cost to fix a sagging gate?
Most sagging gate repairs cost between $150 and $350, depending on whether we need to adjust the existing hinges or reinforce the post. If the post has shifted due to soil movement, we may need to dig and reset it, which will be quoted upfront before we start.
Can you fix a gate that won’t open today?
Yes, we prioritize emergency repairs for gates that are stuck or pose a security risk to your home. Since I have been doing this since 2001, I know that a gate that won’t open isn’t just an inconvenience-it is a security issue. Call (817) 241-4067, and we will get someone out as soon as possible.
Is it cheaper to repair or replace my gate motor?
In many cases, it is significantly cheaper to repair a motor, provided parts are still available. We specialize in servicing nine major brands, including LiftMaster, FAAC, and BFT, so we can often find parts for older units that other companies want to replace entirely. If a replacement is genuinely the better long-term value, we will tell you straight.
Do you charge for estimates?
We offer free estimates for gate repairs. If you have a written estimate from another company, we are happy to provide a free second opinion to ensure you aren’t paying for work you don’t actually need.
Why does my gate make a grinding noise?
That grinding noise is usually a sign of a failing bearing, a stripped gear, or an alignment issue causing the chain to rub. If you ignore it, you risk burning out your motor entirely. It is much cheaper to replace a bearing or realign the chain now than to replace the whole motor assembly later.
Pricing reflects the North Richland Hills market as of 2026. Gatewood Fence & Gate offers free estimates - call (817) 241-4067.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Richland Hills since 2001.
What Our Customers Say
"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo