Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across North Richland Hills
Gate repair in North Richland Hills comes down to one thing more than any other: the soil. The expansive Tarrant County black clay under most NRH subdivisions heaves and contracts through wet-dry cycles, tilting gate posts out of plumb season after season. If your swing gate drags on the driveway, won’t latch, or the hinges look twisted, you’re looking at the same problem thousands of your neighbors have. We show up fast, weld on site, and fix the post before we touch the panel. Call (817) 241-4067 and Hal will answer.
Why Gatewood Fence & Gate Is North Richland Hills’s Preferred Gate Repair Company
The name on the shop is Hal Gatewood. Hal has been fixing gates since 2001, and he still shows up to North Richland Hills jobs himself, or sends a member of his crew who answers to him directly. You’ll never get a faceless national outfit with a rotating cast of strangers. You get the same person who looked at your gate, the same person who gave you the price, and the same person who will come back if anything isn’t right. That is how a local business in North Richland Hills is supposed to work.
We answer the phone with a live person 24 hours a day, seven days a week. Not a voicemail. Not a chatbot. When your gate won’t open at 6:40 on a Tuesday morning and your car is stuck in the driveway, you need somebody to pick up. We do. And when we give you a price, it’s the price. No trip charge inside the county, no surprise line items when the invoice arrives. The Gate Repair estimate you get over the phone is the number we honor in your driveway before any work starts.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no proration, no finger-pointing. Hal’s name is on every invoice, and his address is published for anyone who wants to look him in the eye. That is the oldest accountability there is.
Our Gate Repair Services in North Richland Hills
Electric Gate Repair
Electric gate operators in North Richland Hills take a beating from the weather. The February 2021 freeze seized automated openers all over the city, and the summer heat before and after it pushed control boards and capacitors past their limits. We service LiftMaster, Viking, and other brands, and we diagnose the actual fault instead of selling you a full replacement when a board or a limit switch was the bad part. If your gate beeps but doesn’t move, call us before paying for a whole new operator.
Automatic Gate Repair
Automatic gates fail in patterns. On NRH’s 1980s and 1990s properties, we often find the arm or the actuator is fine, but the post it mounts to has moved. The operator burns itself out trying to shove a gate that can’t travel true. We fix the root cause first: post, hinge alignment, then operator calibration. That is the repair-first philosophy that has kept us busy in North Richland Hills for over two decades.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. That sentence covers about 70 percent of the calls we run in North Richland Hills. The older western neighborhoods, closest to Richland Hills, have ornamental iron gates with original steel hinges corroded by decades of humidity. Combined with the clay movement, you get hinges that tear loose or posts that lean so far the gate scrapes concrete. We cut out the rusted hinge, weld in a new one on site, reinforce the post, and realign the frame. We don’t haul your gate to a shop. We fix it in your driveway.
Gate Realignment
Realignment in NRH is seasonal work. When drought contracts the clay, posts lean one way. When fall rain comes, they lean the other. We set gates back to true, adjust hinges and latch plates, and tell you honestly if the post needs new footings or if the soil will keep moving it. Sometimes the fix is a deeper concrete pour. Sometimes it’s an adjustment you can ride out for another year. We’ll tell you which one you’re looking at, with a straight face and a written price.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Richland Hills
We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In North Richland Hills, we see a lot of DoorKing and Viking operators on older HOA-installed gates, plus a steady stream of newer LiftMaster units on 2000s-built homes. Because we stock common parts and weld on site, turnaround is usually same-day for minor repairs and next-day for anything that needs a fabricated bracket or a replacement hinge set. No waiting three weeks for a part to ship from out of state.
Common Gate Repair Problems We See in North Richland Hills Homes
- Expansive clay heave tilts hinge posts: North Richland Hills sits on Tarrant County black clay that shrinks hard in summer and swells in fall and spring. That seasonal cycle tilts gate posts out of plumb, making swing gates drag, fail to latch, or bind against the post. This is the single most common service call we run in NRH, and it recurs on the same properties year after year.
- 1990s manual gates not built for openers: A huge share of NRH’s original ornamental iron driveway gates were installed as manual swing gates, before residential automation was standard. Their frames and posts were never engineered for motor torque. Adding an opener without reinforcing the post and bracing the frame causes weld cracks and burned-out operators. We see this constantly.
- Shared driveways and narrow setbacks: Many North Richland Hills subdivisions were platted with shared driveway easements and tight side setbacks. A swing gate that has to clear a fence, a neighbor’s wall, or a slope won’t work. We convert swing gates to slide gates on site, keeping vehicle access open during the entire repair.
- Freeze-seized operators: The February 2021 ice event cracked weld points and seized automated operators across the city. If your gate ran fine until that freeze and hasn’t been right since, the failure is probably in the actuator or the control board. We repair those, and we also add freeze protection so the next ice event doesn’t strand you again.
Pricing for Gate Repair in North Richland Hills, TX
A typical gate repair in North Richland Hills runs from about $150 for a simple realignment up to $700-$1,200 for a full post replacement with new concrete footings and welded hinge work. Automatic gate operator repairs usually land between $225 and $650, depending on whether we’re replacing a limit switch, a control board, or an actuator. Weld and rust repair on an ornamental iron gate starts around $250 and goes up based on how many hinge points are compromised. Every price is quoted and agreed before any work begins, so you will never see a bigger number when the job is done. We also offer $40 off any repair over $200, a free second opinion on any written estimate you bring us, and a permanent 10% discount for seniors and veterans. Call (817) 241-4067 for a free estimate.
A Note About North Richland Hills Soils and Your Gate
You live on shrink-swell clay, the same black gumbo that cracks house slabs and heaves fence lines all over Tarrant County. Gate posts set in original 1980s concrete footings were never deep enough for the movement this soil produces. Every drought cycle pulls moisture out of the clay and the ground settles away from the footing, leaving the post loose. Every rainy season pushes it back, often to a slightly different angle. That is why gate realignment in North Richland Hills is a recurring maintenance item, not a one-time fix. Neighboring cities on sandier soil don’t see this failure pattern nearly as often. In NRH, it’s the default. We account for it in every repair we quote by setting posts deeper, using proper drainage around the footing, and recommending hinge systems that tolerate seasonal movement without tearing apart.
The shared-driveway repair in Smithfield is a good example of how this plays out. On a 1990s ornamental iron swing gate with two original steel hinge posts, 30 years of clay movement had shifted both post footings out of line. We dug them out, poured new deeper concrete with better drainage, realigned the hinges, and added a LiftMaster operator with safety photocells. Vehicle access through the shared right of way stayed open the whole time. That’s a standard NRH job for us, not an unusual one.
We Also Serve Cities Near North Richland Hills
Beyond North Richland Hills, our crews serve Hurst, Bedford, Colleyville, and Fort Worth. If you’re on the NRH-Hurst line or just across the Colleyville border, call us. We make the run.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in North Richland Hills
North Richland Hills sits on expansive Tarrant County black clay. The clay shrinks during dry spells and swells when rain returns, moving gate posts out of line with more force than the sandy loam soils found in parts of Hurst, Bedford, and Colleyville. In NRH, the cycle repeats every year on the same properties, which is why post realignment is our most frequent service call here. Call (817) 241-4067 and we’ll look at your footing.
Usually yes, but the post and the frame need to be reinforced first. Most 1990s manual gates in North Richland Hills were never built for motor torque. We weld brace plates and deepen or replace the post footing before mounting the operator, so the gate doesn’t crack or burn out the motor a year later. Call (817) 241-4067 and we’ll tell you what your gate needs.
We work on one side at a time and keep vehicle access open through the shared right of way throughout the job. That usually means staging materials off the driveway or working around traffic, but we’ve done dozens of shared-driveway repairs in North Richland Hills and we plan access before we start anything. Call (817) 241-4067 to set up a site visit.
The hinge post has moved. A gate panel doesn’t sag in the middle; it sags at the hinge. In North Richland Hills, the soil movement tilts and shifts the post until the gate drops and scrapes the ground. We fix the post, not just the panel. Call (817) 241-4067 for a free estimate.
Yes. We repair freeze-seized operators by replacing actuators, control boards, or freeze-damaged components, and we can add cold-weather protection so an ice event doesn’t strand you again. If your gate hasn’t run right since that freeze, call (817) 241-4067 and we’ll diagnose it.
Contact Gatewood Fence & Gate for Gate Repair in North Richland Hills
If you live in North Richland Hills and your gate is dragging, leaning, or dead, call (817) 241-4067. Hal will answer. He’ll give you a straight price, a written 90-Day Done Right Promise, and a repair done in your driveway, not hauled off somewhere you can’t watch. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, fixing gates across North Richland Hills since 2001.