Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Southlake
Gate repair in Southlake, TX typically runs $225-$850 depending on whether you’re dealing with a hinge post that’s pulling out of a stone pillar or a failed underground operator. Most Southlake jobs take half a day, and we stock the common parts for LiftMaster, Viking, and Elite operators locally, so you’re not waiting a week for a capacitor from a warehouse in another state. We answer the phone live around the clock, and we’ll give you a firm price before any work begins. If your gate is sagging, grinding, or just stopped responding to the remote, call (817) 241-4067 and Hal or one of his crew will head your way.
Why Gatewood Fence & Gate Is Southlake’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and he runs Gatewood Fence & Gate the way Southlake homeowners expect a tradesman to operate: local, accountable, and reachable. His name is on the shop, his address is published, and he has never once asked a customer to leave a message with a call center. When you call, a live person answers. When a repair needs welding, it happens in your driveway, not at some yard across the metroplex. The crew that shows up is background-checked and uniformed, and they carry a pretty simple philosophy: fix the gate that’s there instead of selling you a new one.
Southlake customers tend to ask harder questions than most, and they should. These are custom estate gates, not box-store aluminum kits. We’ve worked on Monticello driveways where the operators are original to the home, Timarron estates with intercom-integrated access control, and plenty of neighborhoods off Continental Boulevard where HOA covenants dictate exactly what the panel has to look like. We know how those covenants work, which means we match original fabrication specs on any panel or hinge work instead of slapping on a mismatched replacement that gets flagged at the next HOA walkthrough. Our Gate Repair team treats every Southlake job like it’s two houses down from Hal’s own place.
Our Gate Repair Services in Southlake
Electric Gate Repair
Southlake’s electric gate systems are often two decades old now, and the failure pattern is familiar: a board that works until the gate hits full travel, then a click and nothing. We diagnose the motor, capacitor, limit switches, and wiring on site. If your keypad stopped talking to the opener after a storm, it’s usually the control board or a blown transformer, not the whole operator. In Southlake, we commonly see the original Viking and Elite underground operators from the late 1990s and early 2000s losing their limit switches after February ice storms, which causes the gate to overtravel and shear the rack. We test the whole circuit before quoting anything, and the price you get is the price on the invoice.
Automatic Gate Repair
Automatic swing gates in Southlake live a hard life. The North Texas black-clay soil under most of the city swells when spring rains hit and contracts during drought summers, and that cycle slowly works the post bases loose. An automatic gate that strains, slows, or reverses mid-travel is almost always reacting to a geometry problem: the hinge post moved, the leaf dropped, and the operator is now fighting the weight it was never built to carry. We realign the leaf, re-bed the hinges if needed, and only then touch the operator. Fixing the motor without fixing the post means you’ll fix it twice. Show us a gate closing on its own and we’ll show you where it’s failing.
Hinge & Post Repair
This is the one repair that separates a Southlake specialist from a generic gate company. In most of Southlake, gate hinges are set into stone or brick pillars, not bolted to plain posts. When the clay beneath the pillar heaves even a quarter-inch, the embedded hinge plate pulls away from its mortar bed and the gate drops off-square. Welding the plate back works for a season; doing it right means re-bedding the hinge plate into the pillar, often with masonry work alongside the metal work. We do both. A gate sags in the hinge post, not in the middle, and that’s where we start. Our crews carry color-matched touch-up for powder-coated ornamental panels, because HOA covenants in Southlake don’t allow a rust spot where a weld got dressed.
Gate Realignment
Realignment in Southlake isn’t a one-time fix. It’s a maintenance cycle driven by the soil. Clay expands and contracts with every wet-dry cycle, and an automatic swing gate that ran true in October may be dragging by March. We use level readings, check the leaf gap at both ends, and re-shim the hinges so the operator isn’t overstrained. On properties near Lake Grapevine or along Southlake Boulevard, we watch for erosion under the fence line too. A gate that scrapes the driveway is burning out its motor a little more every day. Realigning it early is cheap compared to replacing an underground operator.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southlake
We’re certified to service nine major gate brands, but in Southlake we see a lot of Viking, Elite, Ghost Controls, and DoorKing underground and swing-arm operators on the big custom estates. That matters because parts availability for these systems is not equal across the metroplex. We stock common boards, limit switches, and capacitors for these brands locally, so a Viking operator on a Monticello driveway doesn’t sit dead for two weeks while a part ships. If the gear is from Linear or Mighty Mule on a smaller side gate, we handle that too, same day in most cases.
Common Gate Repair Problems We See in Southlake Homes
- Expansive clay heaving the hinge post. Southlake’s black-clay soil swells after spring rains and contracts in summer droughts, gradually pulling post footings off plumb. A quarter-inch shift at the pillar drops the entire leaf, which is why realignment here is a recurring service, not a surprise.
- Late-1990s underground operators losing limit switches after ice storms. The original Viking and Elite units installed on Southlake estates during the building boom are now 20 to 25 years old. Winter freezes crack boards and degrade sensors, and post-freeze service calls spike every single winter.
- Photocell misalignment from sagging gates. When the gate drops off-square, the safety photocell beam no longer lines up, and the operator either refuses to close or reverses mid-cycle. In Southlake, this is usually a symptom of a hinge-post problem, not a bad sensor.
- Rust at breached welds on ornamental panels. HOA-mandated powder-coated iron looks great until a weld repair breaches the coating. We dress every weld and apply color-matched touch-up, because Southlake covenants are specific about what a gate panel has to look like.
Pricing for Gate Repair in Southlake, TX
So you know what to expect. A hinge re-bedding on a stone pillar in Southlake generally runs $350-$650 depending on whether masonry repair is needed alongside the metal work. Gate realignment typically falls between $180 and $320 per leaf. Electric gate repair, including a new control board or limit switch, lands in the $225-$550 range for most Southlake systems. Underground Viking or Elite operator rebuilds can run higher, often $700-$1,200 when the rack and pinion or capacitor has failed. Every quote is written before work starts, and it doesn’t change at the door. We also offer $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate. Seniors and veterans get 10% off, permanently.
We Also Serve Cities Near Southlake
If you’re right at the edge of Southlake, we cover the whole surrounding area: Colleyville, Grapevine, Flower Mound, and Bedford. A lot of our Southlake customers have family in those cities, and we’re often out that way the same day. For full details on our Gate Repair in Southlake coverage or to ask about a specific neighborhood, call us anytime.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Southlake
Because the panel isn’t the problem. The hinge post is. Southlake sits on expansive black-clay soil, and every wet-dry cycle works the post footing loose. Welding the panel stiffens the leaf but does nothing for the post base, so the gate will sag again within a season. The fix is re-bedding the hinge plate into the pillar and stabilizing the post base, which is exactly the work we do most often in Southlake. Call (817) 241-4067 for a free assessment; the quote is written before anything starts.
Usually the control board or limit switches, not the motor itself. Ice storms in Southlake stress the exposed boards on older Viking and Elite operators, and the limit switches are the most common casualty. We test the full circuit on site and replace only what has failed. A full motor replacement is rarely necessary on a freeze-related failure. Get a free diagnosis by calling (817) 241-4067.
Yes. Southlake HOAs almost always require replacement panels to match original custom fabrication specs, and we can fabricate a matching panel or repair the existing one in your driveway. The powder-coat finish gets color-matched after any weld work, so the repair doesn’t stand out at the next HOA review. Bring us a photo or the original fabricator’s name and we’ll handle the rest. Call (817) 241-4067 for a free estimate.
Every two to three years, more often if your gate sits on a slope or near a drainage swale. Southlake’s clay soil shifts enough between seasons that realignment is a normal maintenance item, not a sign of a bad install. Ignoring it means the operator works harder every cycle until something fails. (817) 241-4067 will get you on the schedule; we’ll level-check the leaf and tell you honestly if it needs attention now or later.
Yes, and it’s a safety requirement, not a suggestion. Every automatic gate needs working reversing edges or photocells that stop the leaf if something is in the path. On Southlake estates with older operators, entrapment protection sensors are often the first components to fail when the gate sags and throws the beam out of line. We test all safety devices on every service call, and we’ll quote any needed repairs before work begins. Call (817) 241-4067.
Call Gatewood Fence & Gate Today
If your gate is sagging, grinding, or dead in the driveway, call (817) 241-4067. A live person answers around the clock, not a voicemail or a queue. We’ll give you a straight diagnosis and a firm price before any work starts, and every job carries the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop, and his crew works Southlake every week. The name is on the invoice, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Southlake since 2001.