Gate Installation in Coppell - Written Price, Install Date Set

Fast, Reliable Gate Installation Across Coppell

Gate installation in Coppell usually falls into two buckets: replacing a 20-to-30-year-old ornamental iron gate that’s sagging or seized, or adding a new driveway gate to a home that never had one. A standard single swing gate with a new operator typically runs $2,800-$5,500 here, while a full double driveway gate with automation starts around $6,500 and can reach $12,000 depending on width, material, and access control. Hal Gatewood has been welding and hanging gates since 2001, and we work in Coppell’s HOA communities every week. Call (817) 241-4067 for a free estimate, quoted before any work starts.

Call (817) 241-4067

Why Gatewood Fence & Gate Is Coppell’s Preferred Gate Installation Company

Coppell homeowners tend to be specific about what they want, and they should be. Most of the city’s homes were built between the late 1980s and early 2000s, which means the original gates are now aging out at the same time. We see the same failure patterns across Andrews Park, Northlake Woodlands, and the neighborhoods around Sandy Lake Road, and we know which operators were spec’d by which builders. That means we can often tell you what’s wrong over the phone before we even roll up.

Hal’s name is on the shop and on every invoice. We don’t sub out the work, and the person who quotes your gate is typically the person who welds it. Coppell customers regularly mention that we answer the phone with a live person at 7 a.m. or 10 p.m., and that the price we quoted is the price on the final bill. You can also drive to the shop and look Hal in the eye. That’s the oldest accountability there is.

Every job carries our 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. No runaround, no “that’s not covered” hedging.

Our Gate Installation Services in Coppell

Swing Gate

Swing gates are the dominant style across Coppell’s master-planned communities, and they’re also the style most affected by the city’s black-clay soil. When the ground swells after a wet spring, hinge posts heave and the gate binds against the latch. We set new posts deeper than the original builders did, using concrete footings sized for Coppell’s expansive clay, and we verify alignment before the operator ever gets mounted. A standard single swing gate installation in Coppell runs $2,800-$4,500 including the operator.

Driveway Gate

Most Coppell driveway gates are ornamental tubular steel or wrought iron, and HOAs here are strict about matching what’s already on the street. That’s not a hurdle for us; it’s just part of the job. We source period-correct steel profiles and work with your HOA’s architectural committee from the start. A new driveway gate with automation typically runs $4,500-$9,000 in Coppell depending on width, material, and whether we’re reusing existing posts or setting new ones.

Double Gate

Double driveway gates are common on larger Coppell lots, and they double the points of failure: two hinges, two latch points, and either a single operator with a long linkage or two synchronized operators. We frequently replace a failed single-operator setup with a pair of synchronized motors, which is more reliable long-term and easier on the gate hardware. Double gate replacement in Coppell typically starts around $6,500 and runs up to $12,000 for custom ornamental work.

Pedestrian Gate

Pedestrian gates alongside driveways get more daily cycles than the driveway gate itself, especially in Copper Hill and other neighborhoods where kids walk to school. We install self-closing hinges, keypad or card readers, and magnetic locks sized for high-cycle use. A basic pedestrian gate with a keypad lock in Coppell runs $1,800-$3,200.

Trusted Brands We Service in Coppell

We’re certified to service nine major gate brands, and we keep Linear, LiftMaster, and DoorKing parts on the truck specifically because those are the operators Coppell’s production builders installed in the late 1990s and early 2000s. Viking and Ghost Controls we use often on newer installs where homeowners want a quieter, smoother opener. If your existing operator is one of the legacy Linear or early LiftMaster units common in Coppell, we’ll tell you honestly whether a retrofit makes sense or a full Gate Installation is the cheaper long-term answer.

Common Gate Installation Problems We See in Coppell Homes

• Post lean from black-clay soil. Coppell sits on Vertisol clay that swells when wet and contracts when dry. Gate posts set at standard depth slowly tilt year over year, and the gate starts dragging or failing to latch. The fix is deeper footings, not shimming the hinges.
• Obsolete late-1990s control boards. Coppell subdivisions platted by the same builders often got identical OEM swing-gate operators. We’ve replaced enough 1998 Linear and early LiftMaster boards to know the failure timeline, and we stock the corresponding boards for cluster-call patterns across HOA blocks.
• UV-degraded rollers and photo-eye housings. Decades of 100°F summers crack nylon rollers and photocell housings. That triggers false obstruction errors or shuts the operator down entirely. It’s a $40 part that looks like a catastrophic failure until someone knows what they’re looking at.
• HOA mismatch on replacement gates. If the new gate doesn’t match the original tubular steel profile, the HOA sends it back. We pull the approval before we order steel, so the project doesn’t stall halfway through.

Pricing for Gate Installation in Coppell, TX

We Also Serve Cities Near Coppell

Our crews work throughout the mid-cities and northwest Dallas County, including Coppell and the surrounding communities of Grapevine, Flower Mound, Euless, and Southlake. If you’re just outside the city line, call (817) 241-4067 and ask; the trip charge rules apply county-wide.

FAQs - Gate Installation in Coppell