Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Grapevine
Gate parts and welding in Grapevine means stocking commercial-duty components most suburban shops don’t carry, because this city has two very different gate markets sitting side by side. The DFW Airport corridor along International Parkway and SH-121 runs automated barrier arms and slide gates at 500 to 1,000-plus cycles a day, while the lakefront communities around Lake Grapevine demand ornamental iron work that meets strict HOA standards. We keep parts on the truck for both, and we weld on site rather than hauling your gate to some shop across the county. Call (817) 241-4067 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Grapevine’s Preferred Gate Parts & Welding Company
Hal Gatewood started this company in 2001 and his name is still the one on the invoice. That matters in Grapevine, where homeowners have seen national outfits quote one number on the phone and a different one at the door. We quote the price before any work starts, in writing, and the number doesn’t move. You’ll find our published address and license number without digging, and if you want to look Hal in the eye before he touches your gate, the shop is down the road.
Grapevine customers call us for hinge replacements on sagging ornamental gates in the Timarron and Lakeview neighborhoods, for post replacement where Blackland Prairie clay has heaved columns out of plumb, and for custom welding jobs the HOA will actually approve. We know what Grapevine’s architectural review boards look for, because we’ve built and repaired gates that passed those reviews for over two decades. Background-checked, uniformed staff show up when we say they will, and every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back.
Our Gate Parts & Welding Services in Grapevine
Hinge Replacement
Grapevine’s clay soil is the quiet culprit behind most hinge failures we see. When spring rain swells the ground under a gate post, the post leans, and the hinge takes every pound of that stress until the barrel cracks or the weld tears loose. We replace hinges with heavier hardware than what was originally hung, and we weld the new assembly in place while the gate stays in your driveway. A hinge job in most Grapevine neighborhoods runs $180 to $420 depending on gate weight and whether the post needs realignment at the same time.
Post Replacement
Fix the panel without the post and you’ll fix it twice. That’s the rule Hal repeats on half the service calls in Grapevine, because a rotted or heaving post four inches below grade quietly destroys every other component above it. We dig out the old footing, set a new post in concrete with rebar, and weld the gate back to plumb so it actually latches and the operator stops fighting itself. In the lakefront communities near Oak Grove Park, post replacement for a standard driveway gate typically costs $400 to $900, with ornamental steel columns running higher when there’s decorative work to match.
Rail Repair
When a slide gate rail gets bent or the rack teeth wear out on a loop-detector entrance along the airport corridor, replacing the whole gate is the expensive answer, but it’s rarely the right one. We cut out the damaged rail section, weld in new steel, and grind the seam smooth so the rollers don’t chatter. Rail repair in Grapevine generally lands between $250 and $650 per section, and we keep stock rail for most common track sizes on the truck. If your gate is dragging against the rail on the DFW Airport perimeter, don’t run it another week and strip the gear inside the operator.
Custom Welding
Grapevine’s historic core around Main Street has properties that date back to the early twentieth century, and any gate work there has to align with the city’s preservation guidelines. That’s not a fence-supply catalog job. We weld custom picket profiles, clone ornate scrollwork, and match existing finishes so the new section reads as original. Custom welding also covers gate extensions, security cages, and reinforced frames for heavy ornamental gates. Expect $150 to $500 for most residential custom weld work in Grapevine, with a written quote before the torch lights.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Grapevine
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Grapevine specifically, we keep Viking and BFT commercial-duty parts on hand because the airport-corridor gates burn through residential-grade operators in a matter of weeks. Linear and Ghost Controls parts are stocked for the residential swing and slide gates common in Grapevine’s master-planned communities from the 1980s through the 2000s. When you need a part, we’re not placing a special order and making you wait ten days. If it’s a common failure point, it’s probably in the truck.
Common Gate Parts & Welding Problems We See in Grapevine Homes
- Clay-soil post heave after spring rain. Grapevine sits on the Blackland Prairie, and that expansive clay swells hard after a wet spring, pushing gate posts out of alignment and twisting hinge welds until they crack. This is the single most common gate failure in Grapevine, and it’s rarely a hinge problem alone; the post is almost always moving underneath.
- Sagged ornamental gates that miss the latch. In lakefront HOA communities, a 16-foot steel swing gate carrying decorative scrollwork is heavy enough that a failing hinge post lets the latch drift two inches off target. The operator keeps cycling, the safety loop keeps misreading, and the gate eventually hangs up entirely.
- UV and heat stress on vinyl and composite inserts. Grapevine summers regularly exceed 100°F, and that heat is merciless on composite gate fills. Frames expand, rack and pinion gears bind, and the plastic gear inside the operator strips before anything looks obviously broken from the street.
- Shared entry system failures during peak traffic. When a gated community’s loop detector shorts out on a slide gate off Dove Road or Hall-Johnson Road, the gate sticks open or reverses mid-cycle. HOA managers call during school pickup wanting it fixed before the gate gets forced and the real damage starts.
Pricing for Gate Parts & Welding in Grapevine, TX
Here’s honest pricing for the work we do in Grapevine, so you can compare without playing phone tag. Hinge replacement: $180 to $420. Post replacement: $400 to $900, more for tall ornamental columns on lakefront properties. Rail repair: $250 to $650 per section. Custom welding: $150 to $500 for most residential work. Commercial operator swaps and barrier-arm components along the airport corridor run higher because the parts themselves are industrial grade; a Viking or LiftMaster HPPT commercial operator starts around $1,200 installed. The price we quote is the price you pay, before any work starts, and we’ll hand you that number in writing. Seniors and veterans always take 10% off, and any repair over $200 gets another $40 off. No trip charge inside the county. Call (817) 241-4067 for an exact quote; estimates are free.
We Also Serve Cities Near Grapevine
From our metro office serving the Dallas-Fort Worth area, our Gate Parts & Welding crew covers Southlake, Colleyville, Euless, and Coppell, as well as Gate Parts & Welding in Grapevine. If you’re a few minutes outside city limits, give us a call; if we don’t cover your street, we’ll tell you straight.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Grapevine
Yes, in most Grapevine lakefront and gated communities you need architectural review approval before changing the gate style, height, or finish, and the quickest way to get flagged is to install something that looks nothing like the original. We can match the existing design, provide drawings or photos if your management company wants them, and sequence the work so the HOA approval and the installation don’t hold each other up. Call (817) 241-4067 and we’ll help you figure out what your community actually requires before you spend a dollar.
Because the hinges were never the root problem; the post is moving in Grapevine’s expansive Blackland Prairie clay, which swells after heavy rain and shifts the footing underneath the gate. Replacing hinges on a moving post just transfers the stress to the next joint until the weld fails. The fix is to pull the post, set a new footing deep enough to ride out the seasonal swell, and then hang the gate on new hardware welded to match. That’s the repair that actually stays plumb through a Grapevine spring.
In most cases we can weld the rack section back onto the track, but only if the surrounding rail is still straight and the teeth aren’t chewed up from running a stripped gear. If the rack is worn, welding it back is a patch, and you’ll be dealing with the same failure in a few months. We’ll inspect the section, tell you if it’s worth welding or replacing, and give you a firm price either way before we start. No pressure, just a straight answer.
Not necessarily. When a large vehicle sits over the loop detector too long, the control board can misread the signal and reverse the gate mid-cycle, which is a detector or sensitivity issue as often as it’s a photocell problem. We test the loop, the board, and the photocells separately so we’re not selling you parts you don’t need. In Grapevine’s gated communities, most shared entry failures we see are a single shorted loop detector, and the repair is usually quicker and cheaper than a full photocell replacement.
Hardwired is the better call for most Grapevine lakefront driveways, because a gate that cycles multiple times a day needs reliable power and a solar panel shaded by live oaks or running short winter days will leave you with a dead battery at the worst time. Solar works on low-cycle farm gates, but on a lakeside residential gate with visitors, deliveries, and daily use, a hardwired 110v operator is the setup we recommend. Call (817) 241-4067 and we’ll look at your specific run and gate weight before you buy anything.
Call Gatewood Fence & Gate for Gate Parts & Welding in Grapevine
If your gate sags at the hinge post, your operator is fighting a heaving column of Grapevine clay, or your HOA is asking for a welded repair that matches the original ironwork, we’ll come look at it and give you a straight price before any work begins. We answer the phone with a live person around the clock at (817) 241-4067, and the estimate is free. Hal Gatewood has been doing this since 2001, the 90-Day Done Right Promise is on every job, and the name on the shop is the same name you’ll see on the invoice.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grapevine since 2001.