Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Coppell
Gate repair in Coppell usually means one of three things: a swing gate that drags on the driveway, an opener that hums but won’t move, or a hinge post that has tilted out of plumb. We handle all three, and we have been doing it in the Dallas-Fort Worth area since 2001. Hal Gatewood runs the shop, his name is on the truck, and when you call (817) 241-4067 a live person picks up. Not a voicemail, not a call center. Somebody who can tell you whether we can be at your house that afternoon.
Why Gatewood Fence & Gate Is Coppell’s Preferred Gate Repair Company
Coppell is a specific kind of place. Almost every neighborhood here was built between the late 1980s and the early 2000s, which means the ornamental iron and tubular steel gates installed by production builders are now hitting their 20- to 30-year mark. That is the point where original hinges wear through, opener control boards burn out, and posts start leaning from black-clay heave. We know this because we see the same failure patterns on the same streets, year after year. When a gate fails in Northlake Woodlands, it is rarely a one-off. It is often the first of several on the block.
We are locally owned and owner-operated. Hal Gatewood founded the company in 2001 and still answers the phone, still shows up on the job, and still stands behind every repair with the 90-Day Done Right Promise in writing. If it is not done right, we come back and make it right. No runaround, no arguing about what the warranty covers. That promise is stamped on every invoice.
Calls are answered around the clock by a live person. That matters when a gate slams shut at 10 p.m. and your car is trapped in the driveway. It also matters when you need to talk to someone who has actually worked on a Gatewood-era Coppell gate, not someone reading from a script three states away.
Our Gate Repair Services in Coppell
Electric Gate Repair
Electric gate repair in Coppell ranges from dead control boards to failed photo-eyes to wiring that has been chewed through by the same squirrels that own every mature oak in this city. Most Coppell homes run either an early LiftMaster or a Linear operator from the original build, and we stock those control boards on the truck for Coppell Gate Motor & Opener repairs. When one fails at the 20-year mark, the neighbors with the same operator are usually weeks behind. You do not want to be the third caller on a board that sold out that morning.
Automatic Gate Repair
Gate Access Control - Coppell systems have a hard life. Summer temperatures over 100°F cook nylon rollers and crack photo-eye housings, which trips the entrapment protection and leaves the gate stuck halfway open. We rebuild operators in place when we can, replacing bearings, belts, and limit switches instead of quoting you a whole new unit. Hal’s approach is simple: if the gearbox is sound, we fix what failed. If the operator is truly dead, we tell you straight and give you a written price before any work begins.
Hinge & Post Repair
This is the one Coppell homeowners fight every year. The soil under this city is black clay, and it swells and shrinks through every wet-dry cycle. Gate posts heave, tilt, and pull hinges out of alignment. We do not just re-weld a hinge and call it done. We address the post. In many cases that means a deeper, clay-stable concrete pour, then re-setting the post to vertical and re-aligning the gate to match. Fix the panel without the post and you will fix it twice.
Gate Realignment
A sagging gate in Coppell is almost never a bending panel. It is a hinge post that has moved. We correct the post, shim or re-weld the hinge using our Gate Parts & Welding in Coppell, and bring the gate back to level so the latch catches and the opener stops straining. We also handle slide gate realignment, including rack-and-pinion binding that comes from the same ground movement that tilts swing-gate posts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coppell
We are factory-certified to service nine major gate brands, including BFT, Linear, Viking, and Ghost Controls. For Coppell specifically, we keep legacy Linear and early LiftMaster control boards stocked because those are the units installed community-wide by production builders in the late 1990s. If your neighborhood entrance gate runs a Viking underground operator, we service those too. Parts are on hand, and we do on-site welding so your gate stays in your driveway instead of being hauled off to a shop across town. Gate Repair done right means matching the exact board, the exact hinge barrel, and the exact steel profile your gate came with.
Common Gate Repair Problems We See in Coppell Homes
- Seasonal binding from black-clay heave. Coppell sits on Vertisol soil that swells when wet and contracts when dry. June is the worst month because spring rains have pushed the clay to full expansion, tilting hinge posts just enough that gates scrape driveways and latch plates stop lining up.
- Cluster failures of OEM swing-gate operators. Late-1990s subdivisions here were platted with identical operators across entire blocks. When one control board fails, the same unit on the same installation timeline is usually close behind. We stock the boards that match those neighborhoods.
- UV-cracked photo-eye housings and rollers. North Texas sun is brutal. Over-100°F summer days accelerate cracking in nylon components, and when a photo-eye housing cracks, moisture gets in and the entrapment circuit faults. The gate stops closing and sits open.
- Worn hinge barrels on ornamental gates. Twenty-five years of opening and closing wears the original hinge pins into ovals. The gate sags, grinds, and eventually snaps a weld. We re-weld on site with matching steel profile, so the repair disappears into the original design.
Pricing for Gate Repair in Coppell, TX
You should know what things cost before you call. A typical gate realignment in Coppell runs $180-$320, depending on post condition. Hinge and post repair runs $250-$600, with deeper pours on clay-stable footings at the higher end. Electric gate repair runs $180-$450 for board replacement, limit switch work, and photo-eye replacements. Automatic gate repair runs $220-$550, and a full operator replacement on a swing gate typically lands between $900 and $1,800 installed. Every job is quoted and agreed in writing before we start. You will never get a surprise invoice at the door. And we offer $40 off any repair over $200, no trip charge on work inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (817) 241-4067 for an exact figure. Estimates are free.
We Also Serve Cities Near Coppell
Our crews serve Coppell and the surrounding communities, including Grapevine, Flower Mound, Euless, and Southlake. If you are on the edge of Coppell or just across the city line, we are close by. Gate Repair in Coppell is what we do most days, and the same crew, the same 90-Day Done Right Promise, and the same live-answer phone line extend to every town we work.
Serving Coppell, TX - Our Local Coverage Area
We’re based in the Coppell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Coppell
Yes. We regularly source period-correct tubular steel for Coppell HOAs, and we do it before the first weld. Many of the ornamental gates built in Coppell’s late-1990s master-planned communities use specific 1.5-inch and 2-inch tube profiles that are no longer off-the-shelf at big-box stores. We pull from local steel suppliers who carry those profiles, and when an HOA needs documentation, we provide material specs and photos before any visible work begins. We have done this for Northlake Woodlands, Old Town Coppell, and other HOA-governed neighborhoods in the city. You get HOA sign-off first, repair second.
That is black-clay heave. Coppell sits on expansive Vertisol soil that swells dramatically when saturated. Spring rainfall pushes the clay to full expansion, which tilts hinge posts slightly out of vertical. The gate scrapes the driveway, the latch misses the striker, and the opener strains. We correct it by re-setting the post on a deeper, clay-stable footing and re-aligning the gate to match. It is a specific, repeatable fix, not a mystery. Call (817) 241-4067 and we will quote it honestly.
If your neighborhood was built in the late 1990s or early 2000s and your gate operator was installed by the production builder, you and your neighbor likely have the same OEM unit from the same installation timeline. When one fails at the 20-year mark, the others on the block usually follow within weeks. We stock legacy Linear and early LiftMaster boards for exactly this reason. You do not have to wait. We can inspect your operator, test the control board, and replace it before it strands you. A proactive repair is usually cheaper than an emergency one.
Under UL 325, automatic gates must have at least one entrapment protection device: photo-eyes, contact edges, or both. If your 25-year-old Coppell operator has cracked photo-eye housings from UV exposure, the entrapment circuit will fault and the gate will refuse to close. We replace those photo-eyes with new UL-compliant units, test the full reverse function, and bring the system back to code. Older operators can still be made safe. When they cannot, we tell you that too, in plain language.
No. An underground operator that is noisy and slow by its mid-20s is usually running on worn seals, contaminated gear oil, and a tired capacitor. That is not “how it is” with age. We service underground operators, including Viking units common to Coppell’s gated communities, and we can quiet it down and speed it back up without replacing the entire system. The fix is often a seal kit, fresh lubricant, and a capacitor swap: far less than a full replacement. Call (817) 241-4067 for an exact quote before you authorize anything.
Deep Coppell Context: HOA Clusters and Clay-Soil Lessons
Here is something a generic gate repair page will never tell you. Coppell’s late-1990s HOA subdivisions were often equipped with identical OEM swing-gate operators community-wide. That means when one homeowner’s control board fails at the 20-year mark, neighbors on the same installation timeline usually follow within weeks. Our techs stock Legacy/Linear and early LiftMaster boards specifically for these cluster calls across Coppell HOA blocks. We saw this happen in 2024 across several neighborhoods near Denton Tap Road, and we have been ready for it since. This is not a pattern you learn from a franchise playbook. It comes from working the same streets for two decades.
We recently serviced a custom ornamental swing gate in the Northlake Woodlands neighborhood of Coppell. The gate’s original Viking operator had a burned control board, and the hinge post had heaved 3/4 inch out of vertical due to black-clay soil movement. Our crew replaced the post footing with a deeper, clay-stable pour and installed a new Viking control board, then realigned the gate and tuned the safety photocells. The owner said it now swings silently for the first time in years. That is the kind of job we take and the kind of job we guarantee for 90 days in writing.
Call Gatewood Fence & Gate for Gate Repair in Coppell
If your gate is sagging, binding, or simply dead, call (817) 241-4067. You will get a live person, an honest assessment, and a written price before any work starts. Hal Gatewood has been at this since 2001, and the name on the shop is the name you will see on the invoice. No voicemail at 2 a.m. when your gate will not close and your dog is in the yard. No estimate that changes at the door. Just straight answers and a repair that is done right. That is the whole promise.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Coppell and the Dallas-Fort Worth area since 2001.