Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Flower Mound
If your gate in Flower Mound is sagging, grinding, or refusing to open, here’s the straight answer: most repairs on a residential driveway gate run between $180 and $650, and on a high-end ornamental wrought iron or powder-coated aluminum gate in communities like Bridlewood or Wellington, you can expect $300 to $900 depending on whether the post has moved, the operator has failed, or both. We’ve been fixing gates since 2001, and we handle Flower Mound calls with a live person on the phone 24/7. Call (817) 241-4067 and you’ll get Hal or someone on his crew, not a voicemail tree. We come out, diagnose the actual problem, and quote the price before any work starts.
Flower Mound is different from a lot of DFW suburbs, and if you’ve lived here long enough to watch your gate lean a little more each spring, you already know why. The soil under this town moves. We’ll get into that below, because it changes how a gate should be repaired, not just patched.
Key Takeaways:
- Most Flower Mound gate repairs run $180 to $900, quoted up front before work begins.
- Clay heave and 20-25 year old gate systems are the two biggest failure drivers in Flower Mound.
- We repair on site, including welding, so your gate stays in your driveway.
- Every job carries the 90-Day Done Right Promise in writing.
- Call (817) 241-4067 - a live person answers, day or night.
Why Gatewood Fence & Gate Is Flower Mound’s Preferred Gate Repair Company
Hal Gatewood started this company in 2001 and his name is still on the shop, on every invoice, and on the back of the truck that shows up in your driveway. We’re not a franchise. We’re not a call center three states away. When you call about Gate Repair in Flower Mound, you’re talking to someone who has worked on gates in your exact neighborhood, knows the HOA standards in Bridlewood and Wellington, and has seen what twenty years of North Texas clay does to a hinge post.
Flower Mound homeowners tend to do their homework before hiring. Good. Look us up. Our address is published, our license number is published, and Hal will tell you over the phone what he thinks the problem is before he even drives out. If you’ve got a written estimate from another company, bring it. We’ll give you a free second opinion on it, no charge, no pressure.
We’ve built our reputation in Flower Mound on one thing: we fix what other companies want to replace. A sagging gate is usually a post problem, not a panel problem. A “dead” operator is often a failed loop detector or a stressed gear, not a whole new unit. The cheap fix is replace. The right fix is repair. That’s how we’ve kept our name good with people in this town for nearly a quarter century.
Our Gate Repair Services in Flower Mound
We handle the full range of Gate Repair in Flower Mound - from a single hinge squeak to a full operator rebuild. These four services account for most of what we do out here.
Electric Gate Repair
Flower Mound’s electric gates are largely from that big 1990s-2000s buildout, which means a lot of LiftMaster operators are crossing the 20-year mark right now. We repair the operator, the control board, the loop detectors, the photo eyes, and the wiring. If your gate opens fine but won’t close, or trips the sensor for no reason, that’s usually a wiring or loop issue, not a dead motor. We diagnose before we quote.
Automatic Gate Repair
Automatic gates in Flower Mound face a unique problem: the gate can be perfectly built and the operator perfectly installed, but if the post shifts with clay heave, the whole system works against itself. We realign, recalibrate, and repair automatic systems as one integrated unit. On homes in Wellington and Bridlewood, a gate that runs silently for years is the standard, not the exception. We set it up so it actually does that.
Hinge & Post Repair
This is where most Flower Mound gate problems start. A heavy wrought iron gate hangs on its hinge post. When that post heaves out of plumb, the gate drags, the hinges wear unevenly, and the operator strains. We cut and reset posts, pour deeper concrete piers where the clay has pushed them out, and rebuild hinge mounts so they carry weight the way they were designed to. We do this on site, with welding if needed, so your gate never leaves your property.
Gate Realignment
A gate that drags, sticks, or won’t latch is usually a geometry problem. Post moved. Gate racked. Strike plate misaligned. We correct sag at the hinge post, reset the gate’s swing path, and adjust the strike so it latches cleanly every time. In Flower Mound, this is rarely a one-time fix. The soil keeps moving. We set it up so the gate has the best chance of staying true through the next wet spring and dry summer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Flower Mound
We’re certified to service nine major gate brands, and in Flower Mound we see a lot of BFT, Linear, and Viking operators on the older custom properties. Ghost Controls shows up on newer installations, too. We keep common parts for these brands on the truck, which means fewer second trips and a faster turnaround when your gate is down. If you’ve got an older unit that another company says is “obsolete,” call us before you replace it. Hal’s been known to rebuild a control board that a manufacturer stopped supporting fifteen years ago.
Common Gate Repair Problems We See in Flower Mound Homes
- Clay-driven post heave: The expansive Vertisol clay under Flower Mound swells several inches in wet springs and shrinks in summer droughts. Over ten or twenty years, that movement pushes hinge posts out of plumb, misaligns strike plates, and torques gate operators into premature failure. This is the single most common structural problem we correct in Flower Mound.
- February 2021-style ice damage: Hard freezes seize hydraulic hinge systems and crack operator internals. Each winter brings a concentrated wave of repair calls from Flower Mound homes with automatic gates that suddenly won’t cycle. We can usually rebuild the affected components without replacing the whole system.
- Cascading 20-25 year failures: Gates installed during Flower Mound’s primary buildout are hitting end-of-life simultaneously. A single service call often reveals a failing operator, a cracked loop detector wire, and a worn rack-and-pinion drive all at once. We look for the whole picture, not just the symptom that got us called out.
- HOA material-matching problems: Bridlewood, Wellington, and other Flower Mound HOAs have architectural standards requiring gates to match existing ironwork specifications. A generic replacement panel or hardware swap can trigger a violation. We repair and match to the existing gate, so you don’t end up in front of an HOA review board.
Pricing for Gate Repair in Flower Mound, TX
Here’s what you can expect to pay in Flower Mound. A basic hinge replacement or latch adjustment runs $180 to $300. Gate realignment, where we’re correcting sag and resetting the swing path, typically lands between $250 and $500. Hinge and post repair, including resetting a post that clay heave has pushed out of plumb, runs $400 to $900 depending on post size, depth, and whether we’re pouring new concrete piers. Automatic operator repair on a residential swing gate runs $250 to $650 for most units. If the problem is a failed loop detector or wiring, figure $200 to $400.
Every price is quoted and agreed before we start. No trip charge inside the county. $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. And every repair is covered by our 90-Day Done Right Promise in writing. Call (817) 241-4067 for an exact quote - estimates are free.
We Also Serve Cities Near Flower Mound
We handle gate repair across the DFW metro from our base of operations, with crews serving Flower Mound locally. If you’re in Southlake, Grapevine, Coppell, or Colleyville, we cover you too. Same live-answer phone, same 90-Day Done Right Promise, same repair-first approach.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Flower Mound
Because the Vertisol clay under your gate posts expands when it absorbs spring moisture, lifting the post and pushing it out of plumb. This is a Flower Mound-wide condition, not a defect in your gate. We correct it by resetting posts on deeper concrete piers designed to resist seasonal heave, then realigning the gate and recalibrating the operator. Call (817) 241-4067 and we’ll assess whether your posts need resetting or just adjustment.
Usually yes. A 20-year-old gate in Wellington is at the age where operators, loop detectors, and drives fail in sequence, but the gate structure itself - if it’s good wrought iron or powder-coated aluminum - often has another 20 years in it. We’ll give you an honest assessment: if the frame is sound, we repair the operator and wiring. If the post is the problem, we reset it. Replacing a gate that only needed a $300 operator is exactly the kind of wasteful work we push back on. Call (817) 241-4067 for a straight answer.
Yes. We repair and fabricate to match existing ironwork specifications, including ornamental scrollwork, powder-coated aluminum profiles, and hardware finish. If your Bridlewood HOA requires approval before gate work, we can provide the documentation you need. We’ve worked on enough Bridlewood gates to know what the standards are without you having to explain them.
UL 325 requires automatic gate operators to have external entrapment protection - typically photo eyes, edge sensors, or both - that stops and reverses the gate if something is in its path. If your gate reverses on contact with pressure only, it may not meet current standards. We inspect and test these systems on every automatic repair call in Flower Mound, and we’ll bring a non-compliant gate up to standard as part of the repair.
In most cases, yes. Underground operators on Flower Mound’s custom driveway gates are accessible through their top cover or a service hatch, and we can often rebuild the internal drive assembly, replace seals, and rewire loop detectors without removing concrete. If the housing itself has cracked from clay movement, we may need to excavate around the unit, but we do it surgically, not with a jackhammer across your whole driveway apron. Call (817) 241-4067 and we’ll tell you what we’re up against after a site look.
Call Gatewood Fence & Gate for Gate Repair in Flower Mound
If your gate is sagging, dragging, or dead, call (817) 241-4067. A live person answers, day or night. Hal’s name is on the shop and on every invoice, his address is published, and he’s been at this since 2001. We’ll come out, diagnose the real problem, and quote the price before any work starts. No trip charge inside the county. $40 off any repair over $200. And if it’s not done right, the 90-Day Done Right Promise means we make it right - in writing, not buried in fine print.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Flower Mound since 2001.