Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Grapevine
Gate repair in Grapevine, TX typically runs $180-$340 for most hinge, post, and alignment work, with full automatic opener replacement landing between $750 and $1,900 depending on the motor and the amount of welding involved. Most residential calls in Grapevine get same-day or next-day service from us, because a gate that won’t close isn’t just a hassle - it’s an open invitation into your driveway. We’ve worked on enough gates along Lakeside Parkway, Dove Loop, and the older streets off Main Street to know exactly what the soil, the heat, and the HOA standards do to a gate over time. Call Hal at (817) 241-4067 and you’ll talk to a live person who can tell you honestly whether this is a two-hour fix or a full reset.
Why Gatewood Fence & Gate Is Grapevine’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and he still answers the phone himself more days than not. The name is on the shop, the shop is down the road, and that is the oldest accountability there is. When you call about a sagging iron gate in a gated community off Fairway Drive, the person who shows up knows what the HOA expects, because he’s fixed forty gates in that same neighborhood. We don’t run a dispatch queue. We don’t route you through three states. You call, a person picks up, and that person knows gates.
Grapevine customers call us because we weld on site instead of hauling your gate to some shop forty minutes away. A hinge post that’s leaning from Blackland Prairie clay movement gets dug out, reset in deep concrete, and welded true - in your driveway, while you watch. Every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No runaround, no “that’s normal wear.” Hal’s name is on every invoice.
We also stock commercial-duty parts that most residential gate companies in the metroplex don’t bother carrying. That matters in Grapevine, where the hotel corridor along International Parkway runs barrier-arm gates at volumes that shred a box-store operator in weeks. When a hotel maintenance manager calls at 6 a.m. because a slide gate won’t open for a shuttle bus, we show up with Viking and LiftMaster commercial parts on the truck - not a promise to “order something and get back to you.”
Our Gate Repair Services in Grapevine
Electric Gate Repair
Grapevine’s heat is unkind to electric gate operators. Summer temperatures north of 100°F put real thermal stress on gearboxes, circuit boards, and capacitor banks. We diagnose the failure in your driveway, replace the faulty component with a brand-matched part, and recalibrate the open and close limits so the operator isn’t fighting itself. If your keypad works but the gate won’t move, or the gate opens halfway and reverses, that’s usually a limit switch, a photocell, or a fried control board - and we can tell you which one over the phone before we even roll a truck.
Automatic Gate Repair
An automatic gate that won’t respond to a remote, won’t hold position, or cycles randomly usually points to a loop detector fault, a receiver issue, or a controller that’s lost its programming. On the lakefront properties along Lake Grapevine’s shoreline, we routinely service LiftMaster LA400 and Ghost Controls systems where HOA standards demand that the gate works quietly and cleanly every single time. A gate that opens on its own is a safety problem, not a nuisance - show us the gate closing on its own and we’ll show you where it’s failing.
Hinge & Post Repair
This is the work we do more than anything else in Grapevine, and it’s the work other companies try to avoid. The region’s expansive clay soil contracts hard during summer drought and swells after spring rain, and that seasonal movement is the leading cause of post lean and hinge binding. A gate sags in the hinge post, not in the middle - and that is where we start. We cut out the old post footing, reset with deep concrete, weld the hinge tabs back square, and hang the gate so it swings true. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Grapevine’s 1980s and 1990s master-planned subdivisions have thousands of driveway gates that have been settling for two or three decades. When the post leans even half a degree, the latch stops lining up, the operator strains, and the gate starts dragging. We realign the frame, shim or reset the posts, and adjust the operator’s travel limits so the system works like it did when it was installed. On Main Street’s older historic properties, we match the original ironwork style so the repair doesn’t look like a patch job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Grapevine
We’re certified to service nine major gate brands, and on a typical Grapevine service call you’ll see us working on LiftMaster, Ghost Controls, Viking, BFT, and Linear systems. We stock replacement boards, remotes, photocells, and loop detectors for all of them on the truck, which means most residential repairs finish the same day. If your opener is a brand we don’t stock parts for, we’ll tell you that upfront before you spend a dime - and we’ll still give you a free second opinion on any written estimate you’ve already got from someone else.
Common Gate Repair Problems We See in Grapevine Homes
- Post lean from Blackland Prairie clay. Grapevine’s soil shrinks in July and swells in April. Posts that were set in 18 inches of concrete in the 1990s start leaning two to three degrees, and suddenly the gate won’t latch or the operator grinds itself to death. We reset the post deeper than the active clay zone and pack the footing properly.
- Thermal failure of operator gearboxes. A driveway gate in an unshaded Grapevine driveway can sit at 130°F in August. Plastic gearboxes strip, capacitors bulge, and boards crack. We replace with metal-gear commercial units when the gate’s duty cycle demands it, and we don’t sell you more motor than your gate needs.
- UV degradation of vinyl and composite components. The Texas sun is brutal on any polymer part. We see cracked vinyl gate panels and brittle composite hinges on lakefront properties where there’s no tree cover. We’ll tell you honestly when a panel is worth patching and when it’s past saving.
- HOA-mandated ornamental iron that’s rusting through. Grapevine’s gated communities run on standards, and those standards usually say wrought iron look, not white vinyl. When the bottom rail rusts through from sprinkler overspray, we cut out the bad section on site, weld in new steel, and match the finish so the HOA never flags it.
Pricing for Gate Repair in Grapevine, TX
Here’s what Gate Repair actually costs in Grapevine, without the fuzzy “it depends” runaround:
| Repair Type | Typical Range in Grapevine |
|---|---|
| Hinge replacement (welded, on site) | $120 - $280 per hinge |
| Post reset (dig out, concrete, re-set) | $350 - $750 per post |
| Gate realignment (frame, latch, operator travel) | $180 - $340 |
| Operator circuit board or receiver replacement | $200 - $450 |
| Full automatic opener replacement (motor, arms, receiver) | $750 - $1,900 |
| Weld-up rust repair (cut out, weld new steel, finish) | $200 - $500 per section |
Every price is quoted and agreed in writing before any work starts. No surprises at the door. No “well, that’s extra” after the gate’s in pieces. We also knock $40 off any repair over $200, and seniors and veterans get a permanent 10% discount - no haggling, just ask. Estimates are free, and if you’ve got a written quote from another company, we’ll give you a free second opinion on it.
We Also Serve Cities Near Grapevine
Our crews serve the whole Grapevine area, and we’re regularly out in Southlake, Colleyville, Euless, and Coppell for the same gate repair work we do in Grapevine. Southlake and Colleyville run the same course on HOA iron standards, Euless has the same Blackland Prairie clay, and Coppell shares a lot of the same 1990s subdivision stock. Wherever you are in the area, the person who shows up answers to the same name as the shop.
One thing worth knowing if you live near the airport perimeter: Grapevine’s commercial gates along International Parkway and SH-121 run 500 to 1,000+ cycles per day. A residential-grade operator simply doesn’t survive that duty cycle. We stock commercial-duty Viking, LiftMaster HPPT, and BFT parts specifically because so many of the hotels and ground-transportation facilities inside the city limits call us when their barrier-arms and slide gates die. That’s a Grapevine-specific problem, and we keep Grapevine-specific parts on the truck.
On a gated estate off Lakeside Drive, we corrected a sagging 16-foot ornamental iron swing gate whose hinge post had shifted from Blackland Prairie clay movement. We excavated the post footing, reset it with deep concrete, replaced the LiftMaster LA400 operator, and recalibrated the safety photocells and loop detector so the gate runs true without binding. That’s a standard afternoon for us.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Grapevine
Summer temperatures in Grapevine routinely exceed 100°F, and that heat puts real thermal stress on automatic gate operator gearboxes, circuit boards, and capacitors. A gate in an unshaded driveway can hit 130°F surface temperature, which is enough to strip plastic gears and swell capacitors. We see more operator failures in Grapevine between June and September than the rest of the year combined. If your gate’s struggling in the heat, call (817) 241-4067 - the fix is usually a same-day replacement of the failed component, not a full system swap.
Yes, and this is common in Grapevine’s older subdivisions where shared driveways and narrow rights of way leave no room for a swing arc. Sliding gates use a gear-driven track or a cantilever system, and the most frequent failure is a bent or misaligned track, a worn drive gear, or a V-wheel that’s chewed itself out. We repair the track, replace the wheels or gear rack, and recalibrate the motor in place - no need to rip out the whole gate. We serve shared-driveway properties all over Grapevine, and we keep the work contained so your neighbor’s access stays open the whole time.
It means the repair has to match the original style, material, and finish - or your HOA board can flag it and demand you redo it. In Grapevine’s lakefront and master-planned communities, deed restrictions commonly mandate ornamental iron or steel driveway gates. We weld repairs on site in matching steel, grind and finish to match the existing patina, and keep the gate’s silhouette exactly what the HOA approved. If your HOA wants a submittal with repair specs, we can provide the written description and material list. Call us before you buy a replacement off a website - a mismatched gate will cost you more in HOA headaches than our repair will cost you in dollars.
We plan the repair around the gate’s least-busy window, and we work with the property’s staff to keep vehicle and pedestrian flow moving. For slide and barrier-arm gates, that usually means pinning the gate open safely during the work, coning off the approach, and finishing the repair in one visit. We’ve done this for properties along International Parkway where the gate runs 700+ cycles a day - you don’t shut down a shuttle lane for six hours. If you’re a facility manager in Grapevine, call (817) 241-4067 and ask for Hal. He’ll give you a straight answer on timing, parts, and cost before work starts.
Yes - solar gate openers are a practical solution in Grapevine for gates where running electrical conduit would mean trenching through driveways, landscaping, or a neighbor’s yard. Texas sunlight makes solar viable year-round here, though we size the panel and battery bank for real-world duty cycle, not the marketing claim on the box. For most Grapevine residential gates, a solar setup works reliably. For high-cycle commercial gates, solar rarely keeps up, and we’ll tell you that before you spend the money. Estimates are free, and there’s no trip charge inside the county.
Call Gatewood Fence & Gate for Gate Repair in Grapevine, TX
If your gate is sagging, grinding, stuck open, or won’t respond to the remote, call (817) 241-4067 now. You’ll get a live person - not a recording, not a call center. We’ll ask a few questions, give you a straight answer, and schedule a time that actually works. Every job comes with a written quote before work begins, the 90-Day Done Right Promise, and the name of the guy who owns the company on the invoice. No trip charge inside the county, $40 off any repair over $200, and a free second opinion on any written estimate you’ve already got from another company.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grapevine and the surrounding area since 2001.