Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Flower Mound
Gate access control in Flower Mound usually means one of two things: a keypad or phone entry system on a private driveway gate, or a shared entry system at an HOA-governed community entrance. In both cases, the work has to clear an architectural review board before the first tool comes off the truck. At Gatewood Fence & Gate, we’ve been handling that approval dance in Flower Mound long enough to know what the Bridlewood and Wellington boards will ask before they ask it. Call (817) 241-4067 and you’ll get Hal or someone from his crew, not a voicemail tree.
Why Gatewood Fence & Gate Is Flower Mound’s Preferred Gate Access Control Company
Flower Mound isn’t a town where you can throw a universal gate opener on a post and call it done. The HOAs here keep records of original gate specs, and they check. We’ve sat through enough architectural reviews in neighborhoods off Dixon Lane and Morriss Road to know that matching the existing powder-coated aluminum finish on a Wellington entrance gate matters as much as the keypad programming. Homeowners want a name they can verify, and Hal Gatewood’s name is on the shop and on every invoice. That’s the kind of accountability you can’t fake.
Our crews serve Flower Mound from the brand’s Dallas-Fort Worth office, which means we’re not driving in from another county when your gate fails at 6 a.m. on a school day. We know the neighborhoods off Cross Timbers Road, the gated sections in Bridlewood, the long driveways in The Tribute and Tour 18. When a Flower Mound customer calls about a swing gate that won’t close, we already know what the likely culprit is: a hinge post that the black clay pushed out of plumb over a wet spring.
Every job carries our 90-Day Done Right Promise in writing. If something isn’t right, one call brings Hal back. No runaround, no fine print. That promise covers access control work the same as it covers a welded gate panel or a new operator.
Our Gate Access Control Services in Flower Mound
Keypad Entry
Keypad entry is the workhorse of Flower Mound driveway gates. Most homes built in the 1990s and 2000s came with a basic fixed-code keypad, and most of those units are now past their useful life. In Flower Mound, we regularly swap aging keypads for weather-sealed units that hold up to the summer sun on a west-facing gate post. A typical keypad replacement or upgrade in Flower Mound runs $280 to $650, depending on whether we’re wiring in a new unit or integrating it with an existing operator from LiftMaster, Linear, or Viking.
Remote Control
Remote control systems in Flower Mound often fail because the receiver antenna sits too close to a brick column or a powder-coated steel post, reducing range to a few feet. We’ve re-mounted and re-tuned receivers on gates off Gerault Road and Chinn Chapel Road where the original installer tucked the antenna behind the motor housing and called it good. Reprogramming a remote system typically runs $95 to $220 in Flower Mound, and we stock replacement remotes for most major brands so you’re not waiting on a two-week shipping window.
Phone Entry
Phone entry systems let you buzz open the gate from a call or an app, and they’re increasingly common on larger Flower Mound properties where the gate sits a hundred feet or more from the house. The catch in this climate is the wiring. February 2021-style ice storms cracked more than a few phone entry enclosures in Flower Mound, and the freeze-thaw cycle works on the gaskets every winter. Installing or replacing a phone entry system in Flower Mound typically runs $600 to $1,500, including the control module and programming for your existing gate operator.
Card Reader
Card reader systems show up most often at shared community entrances, where the HOA issues prox cards or fobs to residents. In Flower Mound, we service card readers on gated communities along FM 2499 and throughout the Bridlewood master plan. When a card reader stops reading, it’s usually not the reader itself. It’s the ground loop detector in the clay underneath, or a strike plate that the shifting soil knocked a quarter inch out of line. A card reader repair in Flower Mound generally runs $180 to $450, and a full reader-plus-controller replacement runs $900 to $2,200 depending on the gate and access point count.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Flower Mound
We’re certified to service nine gate operator brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Flower Mound customers, that means we can match whatever the original builder spec’d rather than selling you a brand swap the HOA will flag. We keep common BFT and Linear parts stocked in our trucks, because waiting a week for a control board while your gate sits open is not a real option. When a Ghost Controls or Viking unit fails on a Flower Mound driveway, the fix is usually quicker than the HOA paperwork.
Common Gate Access Control Problems We See in Flower Mound Homes
- Clay-driven post movement binding the operator. Flower Mound sits on expansive Vertisol clay that swells after spring rains and shrinks hard in August. When a hinge post moves even an inch, the gate binds, the strike plate misses, and the access control system reads the resistance as an obstruction. The keypad didn’t fail. The ground under the post did.
- HOA architectural mismatches on replacement hardware. Bridlewood and Wellington boards keep original gate specs on file, and they don’t approve a brushed aluminum keypad when the original was oil-rubbed bronze. We handle the finish matching and the paperwork, because a repair that doesn’t clear architectural review is a repair you’ll be doing twice.
- Aged underground loop detectors failing. Gates installed during Flower Mound’s 1990s and 2000s buildout are hitting their 20 to 25 year mark. Underground loop wiring is stressed by years of soil shrink-swell, and when it fails, the entry system stops detecting resident vehicles. We diagnose and replace loop detectors without tearing up your driveway.
- Winter ice storm damage to enclosures and hydraulics. The February 2021 freeze cracked gate control enclosures and seized hydraulic operators all over Flower Mound. Every winter, we get a concentrated wave of phone entry and intercom failures after the first hard freeze, and the fix is rarely just a reset button.
Pricing for Gate Access Control in Flower Mound, TX
Here’s what Flower Mound homeowners can expect to pay. A keypad replacement runs $280 to $650. Remote reprogramming or receiver repair runs $95 to $220. A phone entry installation runs $600 to $1,500. A card reader repair runs $180 to $450, and a full card reader system with controller runs $900 to $2,200. A video intercom system for a private driveway gate typically runs $1,200 to $3,500 depending on camera count and whether it ties into your existing operator. Every quote is written and agreed before any work starts, so the number you approve is the number you pay. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (817) 241-4067 for a firm price.
We Also Serve Cities Near Flower Mound
Our Gate Access Control work regularly takes us to Southlake, Grapevine, Coppell, and Colleyville. The clay is the same, the HOA standards are similar, and the freeze-thaw cycle doesn’t skip a county line. If you’re in one of those towns and your entry system is acting up, the same crew that works in Flower Mound can get you sorted. Same live phone answer, same 90-Day Done Right Promise.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Flower Mound
In Bridlewood, replacing a gate operator typically requires submission of an architectural modification request to the HOA management company, including the make and model of the new operator and confirmation that the gate’s style, height, and finish remain unchanged. The board mostly wants to know you’re not altering the gate’s appearance or widening the entry. We handle this paperwork for you and can provide spec sheets the board will accept. Call (817) 241-4067 and we’ll walk you through what Bridlewood’s committee is currently asking for.
Yes, and we’ve done it in Wellington specifically. The trick is mounting the intercom unit to match the existing hardware finish and keeping the camera housing low-profile so it doesn’t change the gate’s architectural look. We replaced a failed LiftMaster swing gate operator on a shared Wellington entry after the hinge post shifted in the black clay, reset the post footing, re-squared the gate, then reprogrammed resident keypad codes. The management company approved the work only after we matched the powder-coated finish to the original spec. Expect to budget $1,500 to $4,000 for a community entry video intercom depending on resident count.
No. If the gate binds or sags, the access control system reads the obstruction and refuses to close, so replacing the keypad first is throwing money at the wrong problem. In Flower Mound, a gate sags in the hinge post, not in the middle, and the cause is almost always the expansive clay heaving the post out of plumb. Fix the post first, re-square the gate, then address the access control. That order of operations saves you a second repair bill. Call (817) 241-4067 for a diagnosis that starts at the post, not the keypad.
When a loop detector fails, the entry system stops sensing resident vehicles, so the gate either won’t open for exiting traffic or won’t close after someone drives through. In Flower Mound’s shrink-swell clay, 20-year-old loop wiring is commonly cracked or shorted underground. We test the loop first, replace the detector if it’s salvageable, and if the loop wire itself is dead, we install a new saw-cut loop in the existing pavement. A loop detector replacement with new wire typically runs $800 to $1,800 in Flower Mound depending on lane width and traffic control needs. Call (817) 241-4067 to schedule a loop test.
When an ice storm cracks the gasket or housing on a phone entry system, moisture gets inside and shorts the control board, and the system stops answering calls or buzzing the gate open. In Flower Mound, we saw a wave of this after February 2021, and it repeats on a smaller scale every hard freeze. We replace the damaged enclosure, test the board, and if the board is fried, we install a new unit and reprogram all resident codes. Budget $400 to $1,200 for a typical ice-damage phone entry repair. Call (817) 241-4067 and we’ll get you on the schedule before the next freeze.
Call Gatewood Fence & Gate for Gate Access Control in Flower Mound
If your Flower Mound gate is binding, your keypad is dead, or your HOA is asking questions you don’t know how to answer, call (817) 241-4067. You’ll get a live person, a straight answer, and a written quote before any work begins. Hal Gatewood’s name is on the shop, and the 90-Day Done Right Promise is on every job. That hasn’t changed since 2001, and it won’t change for Flower Mound.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Flower Mound since 2001.