Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Keller
Gate access control in Keller, TX usually comes down to one of three jobs: a keypad that stopped letting you in, a phone entry system that won’t ring through, or a video intercom that shows a blank screen when the delivery driver presses the button. Most Keller jobs run between $295 and $1,400 depending on the hardware and whether we’re repairing what’s there or installing new. Call (817) 241-4067 for a free estimate, and one of our crew will come out, look at the gate, and tell you straight what it needs. Hal Gatewood has been at this since 2001, and the name’s on the shop and on every invoice you’ll get.
Why Gatewood Fence & Gate Is Keller’s Preferred Gate Access Control Company
We’ve lost count of the Keller driveways we’ve stood in, but we remember the streets. Hidden Lakes, the estates off Johnson Road near Marshall Ridge, the gated sections of Vista Pointe, the older ranches along Bear Creek Parkway where the iron gates are as old as the trees. Keller is where we see some of the heaviest ornamental gates in Tarrant County, and heavy gates punish sloppy access control work faster than anything else. A keypad wired wrong on a light gate works for a few months. On a 600-pound custom iron gate, it fails in weeks.
When you call us, the person who answers is here in the DFW metro, not in another state. We schedule Keller jobs throughout the week, and if your gate won’t open at all, we treat that as urgent and get someone there as fast as the route allows. You’ll get a real person on the phone any hour, which matters when it’s 10 pm and your gate is stuck closed with the car inside.
Hal Gatewood’s reputation in Keller rests on one thing: we fix things other companies replace. If your keypad stopped working because the hinge post shifted and the gate’s out of alignment, we don’t just swap the keypad and call it done. We fix the gate. That’s the difference between a repair that lasts and one that doesn’t.
Our Gate Access Control Services in Keller
Access control isn’t just the panel by the gate. It’s the keypad, the remote, the phone line, the intercom, the receiver in the operator, and the wiring that ties it all together. Here’s what we handle most in Keller:
Keypad Entry
Most Keller homes with an automatic gate have a keypad somewhere, and most of them are worn from years of Texas sun and daily use. We service and install keypads on every major operator brand, including Viking and Linear models common in Keller’s master-planned subdivisions. A new weather-sealed keypad runs $225 to $475, installed, and we program codes on the spot so you can test it before we leave.
Phone Entry
Phone entry systems let a visitor call your cell from the gate, and then you buzz them in with a button press. In Keller subdivisions with long driveways and no view of the street, they’re standard. We install and repair cellular phone entry units starting around $500 and up to $1,100 depending on the model. If the gate’s phone system stopped working after a storm, we check the antenna, the SIM, and the wiring, not just the box itself.
Video Intercom
Keller homeowners ask for video intercoms more than just about anything on the access control side. You want to see who’s there, not just hear a voice. We install video intercom systems with color screens and night vision, wired to your home or to your phone, so you can see the driveway from anywhere. Expect to pay $700 to $1,600 for a quality unit installed. We wire it into the existing gate operator or put in a new one if the old operator can’t support it.
Card Reader
For HOA entrance gates and private lanes, card readers are still the workhorse. We install proximity card readers and key fob systems on community gates throughout Keller, including newer subdivisions with BFT and Ghost Controls operators. A card reader adds $350 to $700 to an existing opener, plus the cost of cards or fobs. We can program hundreds of users if the HOA needs it.
If you need Gate Access Control beyond these basics, we also handle smart phone apps, remote control receivers, and full retrotele fit on older operators. Call us and describe what you have; Hal will tell you what’s realistic and what isn’t.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
We’re certified to service and install nine major gate brands, and in Keller we see a lot of BFT, Linear, Viking, and Ghost Controls on the residential side. That matters because Keller gates aren’t all the same: a BFT underground operator in an estate gate is a very different animal from a Ghost Controls slide opener on a ranch entrance. We stock common parts and boards for these brands, so when your keypad or receiver dies we can often get it running in one visit instead of waiting on a shipping truck. If your operator is a brand we don’t recognize, Hal will tell you straight and we’ll source the part anyway.
Common Gate Access Control Problems We See in Keller Homes
- Expansive clay heaves hinge posts out of plumb. Keller sits on Blackland Prairie soil that swells in wet seasons and shrinks dry. A post that shifts even an inch binds the gate, tripping safety photocells and making the opener work twice as hard until it burns out.
- UV degradation after 20+ North Texas summers. Wire insulation gets brittle, hydraulic seals crack, and keypad faces fade and split. We replace sun-damaged wiring and reseal operator housings as part of a normal repair, not as an add-on surprise.
- Loop detectors fail when the gate shifts out of alignment. If the gate slides or swings past the sensor, the loop doesn’t know you’re there. The gate either won’t open or starts closing on the car. We see this on older Keller entrances where the concrete pad cracked and the loop wire broke.
- Phone entry and intercoms lose signal in dense subdivisions. Keller’s tree-lined lots and metal gate housings block weak signals. We mount antennas properly and run shielded wire when it’s needed, so the gate actually rings your phone from the street.
Pricing for Gate Access Control in Keller, TX
Here’s what Keller homeowners can expect to pay for common access control work, based on what we’ve quoted across the city in recent years. A basic keypad replacement or repair runs $225 to $475. Installing a complete phone entry system on an existing gate runs $500 to $1,100. Video intercom installation runs $700 to $1,600 for a quality unit with mobile app support. Card reader add-ons for HOA gates run $350 to $700, plus cards. Emergency service calls for a gate stuck closed or an operator that won’t respond may include a trip charge if you’re outside the county, but inside Keller we don’t charge one. Every quote is agreed before we start, and you’ll see the price on paper, not hear it over the phone after the fact. Hal offers a free second opinion on any written estimate you’ve gotten from another company, and seniors and veterans save 10% permanently.
If the job is over $200, you get $40 off. If you call and get a live person at 2 am, that’s us. We’re honest about what fixes the gate and what doesn’t.
We Also Serve Cities Near Keller
If you’re in North Richland Hills, Southlake, Colleyville, or Hurst, we’ve been through your neighborhoods too and we can usually schedule a visit within the week. The Keller office is our main call point for the area, but the trucks cover the whole corridor from 114 down to 121.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Keller
It’s almost always the post. Keller’s Blackland Prairie clay heaves with wet and dry cycles, and a gate hinge post that’s moved out of plumb forces the gate to fight the opener every time it cycles. We repair the post first, then the opener. Call (817) 241-4067 and Hal will look at it in person and tell you what’s actually happening.
If your gate has an automatic opener, it needs working entrapment protection: photo eyes, reversing edges, or another approved safety device. In Keller’s older homes, we see operators from the early 2000s with missing or bypassed safety devices. We inspect and test the system on every service call, and if it fails, we quote the repair before we touch anything else.
Card readers and phone entry are the most common for Keller HOAs, especially in older subdivisions with multiple users. Card readers handle high volume, and phone entry lets residents buzz visitors through without a fob. We program and manage both, and we can work with your HOA board to get a quote that covers the entrance gate and any service gates.
Usually, yes. We weld on site, which means your gate stays in the driveway while we repair the frame, the hinge side, or the operator mounting point. Most Keller ornamental gates are structural steel under a decorative finish, and the sag comes from a worn hinge or a shifted post, not from the panel failing. We fix the hinge post and re-hang the gate, then adjust the operator and safety devices to match.
A solar gate opener in Keller needs its panel cleaned seasonally, the battery checked once or twice a year, and the charging circuit tested before the hot months start. Dust, pollen, and the North Texas sun cake a panel quickly. We come out once a year for a maintenance visit, test the panel output, clean the connections, and make sure the gate still opens on a cloudy stretch. If your solar panel is undersized, we’ll tell you what to add.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Keller and the surrounding area since 2001.
Contact Us
If your Keller gate won’t open, won’t close, or just won’t do what it’s supposed to, call (817) 241-4067. You’ll get a live person, a straight answer, and a free estimate. We’ve been fixing gates in Keller long enough to know the soil, the sun, and the way these subdivisions were built. Hal Gatewood will be the one who says what’s wrong and what it costs. No games, no upselling, no surprise invoice. Call for a free estimate today.